# ![@wiringrescue Avatar](https://lunarcrush.com/gi/w:26/cr:youtube::UCy1mgIDzBE7gzrkYCsZs_fw.png) @wiringrescue Wiring Rescue

Wiring Rescue posts on YouTube about how to, rescue, relay, switch the most. They currently have [-------] followers and [--] posts still getting attention that total [------] engagements in the last [--] hours.

### Engagements: [------] [#](/creator/youtube::UCy1mgIDzBE7gzrkYCsZs_fw/interactions)
![Engagements Line Chart](https://lunarcrush.com/gi/w:600/cr:youtube::UCy1mgIDzBE7gzrkYCsZs_fw/c:line/m:interactions.svg)

- [--] Week [------] +43%
- [--] Month [-------] -15%
- [--] Months [---------] -2.10%
- [--] Year [---------] +89%

### Mentions: [--] [#](/creator/youtube::UCy1mgIDzBE7gzrkYCsZs_fw/posts_active)
![Mentions Line Chart](https://lunarcrush.com/gi/w:600/cr:youtube::UCy1mgIDzBE7gzrkYCsZs_fw/c:line/m:posts_active.svg)

- [--] Week [--] +9.10%
- [--] Month [--] -62%
- [--] Months [--] +129%
- [--] Year [--] +190%

### Followers: [-------] [#](/creator/youtube::UCy1mgIDzBE7gzrkYCsZs_fw/followers)
![Followers Line Chart](https://lunarcrush.com/gi/w:600/cr:youtube::UCy1mgIDzBE7gzrkYCsZs_fw/c:line/m:followers.svg)

- [--] Week [-------] no change
- [--] Month [-------] +0.72%
- [--] Months [-------] +8.60%
- [--] Year [-------] +23%

### CreatorRank: [-------] [#](/creator/youtube::UCy1mgIDzBE7gzrkYCsZs_fw/influencer_rank)
![CreatorRank Line Chart](https://lunarcrush.com/gi/w:600/cr:youtube::UCy1mgIDzBE7gzrkYCsZs_fw/c:line/m:influencer_rank.svg)

### Social Influence

**Social category influence**
[automotive brands](/list/automotive-brands)  [social networks](/list/social-networks)  [technology brands](/list/technology-brands) 

**Social topic influence**
[how to](/topic/how-to), [rescue](/topic/rescue) #1437, [relay](/topic/relay) #130, [switch](/topic/switch) #1061, [light](/topic/light), [fuel](/topic/fuel), [12v](/topic/12v), [jeremy](/topic/jeremy), [swap](/topic/swap), [engine](/topic/engine)

**Top accounts mentioned or mentioned by**
[@rattymusclecar](/creator/undefined) [@uczp6j1lnu7acl2htscdda](/creator/undefined) [@projectcarrescue](/creator/undefined) [@hotrodcoffeeshop](/creator/undefined) [@12v](/creator/undefined)
### Top Social Posts
Top posts by engagements in the last [--] hours

"2015 Ram [----] - How to Replace Rear Brake Rotors Pads & Parking Brake Shoes MORE PRO TIPS AND SKIP-AHEAD LINKS BELOW: 0:00 - How to replace the rear brakes on a Ram [----] 0:30 - How to Remove a Rear Brake Caliper 1:26 - How to Remove the Rear Brake Caliper Bracket 2:19 - How to Remove a Stuck Brake Rotor 6:15 - What a Damaged Brake Rotor Looks Like 8:00 - How to remove the Parking Brake Shoes 12:42 - How to Install Parking Brake Shoes 15:33 - How to Install a Rear Brake Rotor 15:43 - Dont Make This Mistake 17:22 - How to Compress the Brake Caliper Piston 18:15 - How to Install Brake Pads 19:27"  
[YouTube Link](https://youtube.com/watch?v=V9FPugNXx6s)  2020-09-06T13:07Z 139K followers, 171.3K engagements


"12V Automotive Wiring Diagnosis - Continuity For Beginners @WiringRescue **PARTS LIST IN DESCRIPTION BELOW** In this video I demonstrate how to use continuity on a multimeter to diagnose and fix 12V DC automotive wiring problems. Start with setting the DVOM (digital volt ohm meter) to Ohms and then find which wires are continuous and which wires are not. Common problems are: - Damaged wires - Loose connectors - Blown / popped fuses - Open circuits - Power & Grounds - Butt connectors - Damaged switches In general this video covers diagnosis for race car wiring alternator wiring automotive"  
[YouTube Link](https://youtube.com/watch?v=YpJOYwiQDHk)  2024-09-06T12:00Z 139K followers, 43.2K engagements


"How to Wire 12v Switches LED Halo Toggle Rocker Combination FOR BEGINNERS **PARTS LIST IN DESCRIPTION BELOW** In this video I demonstrate how to use continuity on a multimeter to determine how to wire any type of 12v switch with and without a relay. This includes a simple [--] wire switch a [--] wire illuminated LED switch a [--] wire Apiele Halo LED switch push-buttons switches and the Kubota-tractor-style switch that many drag racers use for drag and drive race cars. In general this video covers diagnosis for race car switch wiring toggle switch wiring halo switch wiring rocker switch wiring [--] and 3"  
[YouTube Link](https://youtube.com/watch?v=u51X056EhH4)  2024-12-19T00:26Z 139K followers, 41.9K engagements


"Power Window Motor Car Wiring - FOR BEGINNERS @WiringRescue **PARTS LIST IN DESCRIPTION BELOW** Power window motors can be wired many different ways for many different purposes. This video shows the two ways of how to wire a window motor. One method does not use any relays. The other method uses two [--] pin Bosch style relays. I also explain how the switches work in each circuit and why I might choose one window motor wiring method over the other. Whether you are wiring window motors in your race car or daily driver this wiring diagram should help VIDEOS & PLAYLISTS: ➡This is my video on how to"  
[YouTube Link](https://youtube.com/watch?v=Avo_35OUCPM)  2023-02-26T18:00Z 139K followers, 358.4K engagements


"How To Wire a [--] or [--] Pin Relay With a Negative Trigger Wire. In this video I explain why it is necessary to use a relay in a circuit. I then demonstrate how to wire a [--] pin relay with a negative trigger wire. The benefits of using a negative trigger wire on a [--] pin relay would be - one less power wire going to the relay and not needing a power wire feeding your switch. This may be beneficial depending on what type of accessories you are wiring into your car or truck. You could use this method for a radiator fan fuel pump headlights fog lights spot lights LED lights and probably hundreds of"  
[YouTube Link](https://youtube.com/watch?v=QAD8vDHTbzo)  2020-12-09T03:31Z 139K followers, 333.9K engagements


"How To Remove A Broken Bolt [--] DIFFERENT WAYS - LS Exhaust Manifold How to remove a broken bolt you ask I've got [--] PROVEN ways of removing broken bolts. These bolts have been in the cylinder head of a 5.3L LM7 V8 engine holding the exhaust manifold on for [------] miles so they are massively rusty and stuck I cut the heads off of all the manifold bolts and then provide [--] bolt removal methods for you to try on your own engine. Some work better than others. In general this video covers how to remove a broken bolt broken bolt removal how to remove broken bolt remove broken bolt bolt extractor"  
[YouTube Link](https://youtube.com/watch?v=x_ky5JVxtqU)  2021-07-12T22:41Z 139K followers, 2.1M engagements


"How To Wire Electric Fuel Pump Relay / Bypass / Rewire / Hardwire Upgrade In this video I show how a fuel pump relay works and how to bypass yours. I also show how to rewire your fuel pump for an upgraded fuel system or race car. Aftermarket [--] pin bosch style fuel pump relays can easily be wired into any car and made to work with nearly any electric fuel pump scenario you can come up with. This info could apply to any Bosch [---] style pump AEM external pumps or even a Walbro [---] fuel pump. Pin [--] - Incoming 12v to relay from battery Pin [--] - Outgoing from relay to electric fuel pump power. Pin"  
[YouTube Link](https://youtube.com/watch?v=8GjvRdssvFI)  2020-10-15T23:48Z 139K followers, 843.1K engagements


"How To Wire An Electric Radiator Fan Relay Temp Sensor AND Switch @WiringRescue This video shows how to easily wire an electric radiator fan circuit into any car. This fan wiring diagram includes a fan relay a temperature switch and a manual on/of switch that can be used to manually turn on the fan whenever you want. This radiator fan wiring circuit is great when building a hotrod muscle car or anytime that you're swapping from a clutch fan to an electric fan. The Electric Radiator Fan Relay Wiring: - Pin [--] (Red) 12v input from battery through circuit breaker - Pin [--] (Black) 12v power feed"  
[YouTube Link](https://youtube.com/watch?v=9Hj7Ri3TXhc)  2022-01-30T03:30Z 139K followers, 1.2M engagements


"Fuel Pump Inertia Switch Wiring for Beginners (With a Relay) @WiringRescue **PARTS LIST IN DESCRIPTION BELOW** In this video I show how I wired an inertia switch and fuel pump relay into an electric fuel pump circuit. I use a [--] pin relay two inline fuses a single pole single throw switch and an external fuel pump for the demonstration. This type of circuit is great for if you are wiring a race car a hotrod or just learning the basics of car wiring. Hopefully you enjoy the video VIDEOS & PLAYLISTS: ➡ This is my video on how to choose the right fuse and wire sizes when building a circuit:"  
[YouTube Link](https://youtube.com/watch?v=MHgMHE6TUG8)  2022-11-07T22:40Z 139K followers, 627K engagements


"5 Pin Relay Wiring For Beginners Diagram @WiringRescue **PARTS LIST IN DESCRIPTION BELOW** [--] pin relay wiring can be done many different ways. The two most common ways to wire a [--] pin relay is with a positive trigger and with a negative trigger. Each method has its own benefits. In this video I show how to wire a relay each way and how the relay actually works. Rather than trying to read a relay wiring diagram this video provides the guidance you need to do it yourself without the confusion from schematics. Many people call this type of relay a Bosch type relay because that is the company"  
[YouTube Link](https://youtube.com/watch?v=QCkfFCLa_Jg)  2023-01-13T22:00Z 139K followers, 180.6K engagements


"How to Wire a [--] Pin Automotive Relay. Pins 87/30/85/86/87a . Bosch Style. Fans / Fuel Pump / Lights This is a how-to video for wiring a [--] pin Bosch-style Automotive relay. Ive created an actual circuit for you to follow along with and I explain how they work. Relays are important to have for Fuel Pumps Electric Fans Horns Aftermarket Lights etc. They protect the switch from damage by passing the higher amperage through the relay instead of the switch. In this specific diagram it is wired as a "positive trigger" relay. That means that you are controlling the positive side of the circuit with a"  
[YouTube Link](https://youtube.com/watch?v=W2Mr2Zgv1Ck)  2020-05-01T01:16Z 139K followers, 824.5K engagements


"Hotrod Race car Drift car Wiring for Beginners. (Alternator Battery Switch Fuse Box Starter) **PARTS LIST IN DESCRIPTION BELOW** In this video I show the basics of wiring for a hotrod drift car ratty muscle car or race car. I include how I wired a GM 3-wire 10si / 12si Alternator along with a 12v automotive fuse box and a starter circuit. I used 200A Cole Hersee Relays power the fuse box and the starter. I discuss the differences between a continuous use vs non-continuous use solenoids and the importance of using diodes. In general this video covers car wiring race car wiring alternator"  
[YouTube Link](https://youtube.com/watch?v=Yz9kqxWkoHI)  2022-10-23T14:00Z 139K followers, 4M engagements


"How to Wire a Horn Relay Circuit EASILY in your Car / Truck / Motorcycle / ATV / Dirt Bike In this video I explain how to wire a set of horns into any vehicle that you want. This is the way that I like to wire horns because it uses a negative trigger wire. This is beneficial because you dont need to run any power wire into the interior of the vehicle just a ground. This makes building this circuit easier and safer. 0:00 How to easily wire horns on a car truck atv snowmobiles side by sides etc. 0:20 Low tone and high tone horns 0:43 The benefits of ground trigger relay 1:26 List of needed"  
[YouTube Link](https://youtube.com/watch?v=eu0vQKKDVho)  2021-10-09T14:47Z 139K followers, 334.5K engagements


"How To Remove / Depin Terminals From [--] Pin Relay Connector @WiringRescue In this video I show to how remove terminals / depin a [--] pin relay connector. Removing pins like this can easily be done with a hair clip which can be bought at any grocery store or pharmacy near you. Simply bend the hair clip remove the rubber nub on the end and use it to pull terminals out of the electrical connector. This method can be used for many different spade terminals when depinning a connector. Some Items I like: 🔗 [--] Pack of 5-pin Bosch Style Relays - https://amzn.to/2OfiwXT 🔗 Hair pins used in video:"  
[YouTube Link](https://youtube.com/watch?v=pELf2s0xPAs)  2022-04-17T02:11Z 139K followers, 99.2K engagements


"How Does a Turn Signal Flasher Relay Blink The Lights on Your Car Truck Motorcycle How does a turn signal flasher relay blink the lights on your car How does a flasher work Do you want to actually SEE the clicking noise happen in REAL TIME Well this video reveals this mystery. You see it's the turn signal flasher making that clicking noise that you hear. Now the turn signal flasher has a bimetallic spring inside of it that heats up as the electricity flows through it. When it warms up the little metal spring bends and breaks the electrical connection for the turn signal which turns the lights"  
[YouTube Link](https://youtube.com/watch?v=rpVB49LOEPM)  2021-08-21T21:00Z 139K followers, 68.3K engagements


"How to remove pins from a connector / Depinning Connector "How to remove pins from a connector" or "How to depin a connector" are really common questions I get from friends when they are wrenching on their cars. Year ago I discovered a really easy way to de-pin wires from connectors using a hair clip with some minor modifications and I'm showing you exactly that in this video. This specific wiring connector is from a fuel injector and I cut one in half so that you could see the cutaway version with the terminals and have a better understanding of what is inside. Hopefully it helps you out"  
[YouTube Link](https://youtube.com/watch?v=sfiJYyqYcfY)  2023-04-01T14:34Z 139K followers, 308.1K engagements


"How to Wire Headlights Turn Signals Brake Lights Parking Lights Hazards Horn Kubota Switch ** Parts List in Description - Check It Out ** In this video I explain how to wire Headlights Turn Signals Brake Lights Parking Lights Hazard Lights and Horns using a Kubota Tractor multifunction light switch. Don't like the Kubota switch That's okay You can use nearly any kind of switches that you want if you are using relays. If you are wiring a race car for a drag and drive race a hotrod a ratrod a UTV a ATV or anything in between the information in this video may be helpful to you. In the first"  
[YouTube Link](https://youtube.com/watch?v=y5Q3QOR4PnM)  2022-07-21T01:54Z 139K followers, 1.3M engagements


"How to Wire a Headlight Relay for Sealed Beam Round & Rectangle Lights w/ Floor Dimmer Switch. This video shows to how to wire a headlight relay for a pair of Round or Rectangle sealed beam headlights with a floor mounted high beam dimmer switch. I use a modern [--] pin bosch style relay and switch instead of a giant old school style headlight switch. Relay Info & Part List Below: 0:12 H6024 7" Round Sealed Beam Headlight 0:53 H6054 Rectangle Sealed Beam Headlight 1:37 Why old cars have giant headlight switches 2:00 Why to use a headlight relay 2:11 DS72 Floor Mounted Dimmer Switch 2:45 Dual"  
[YouTube Link](https://youtube.com/watch?v=0h_ZbIBHM-M)  2021-02-16T22:16Z 139K followers, 206.6K engagements


"How To Wire a Turn Signal Flasher Relay Directional Blinker on a Car / Truck / ATV / Motorcycle In this video I show you how I would wire an automotive flasher relay (which is also called a turn signal directional and blinker circuit) for a car truck motorcycle ATV dirt bike side by side go cart or whatever kind of vehicle needs a left and right turn signal. There are many ways to wire automotive style turn signals but I prefer to wire them using two relays because I feel like it is a safest method of wiring the signal lights. Below is a list of the relays the turn signal flasher fuses the"  
[YouTube Link](https://youtube.com/watch?v=c8JDQrUquw8)  2021-02-09T04:12Z 139K followers, 711.5K engagements


"2009-18 Dodge Ram [----] 5.7L Hemi Water Pump Waterpump Replacement Repair How To PRO TIPS SKIP-AHEAD LINKS PARTS LIST BELOW: 3:14 - Dont Make This Mistake 12:15 - How I fixed my mistake. SKIP AHEAD LINKS: 0:00 2009-18 Dodge Ram [----] 5.7L Hemi Water Pump Replacement 0:09 - Signs of a bad water pump 1:00 - Two methods of removing a fan clutch 2:22 - Removing the plastic fan shroud 3:14 - Dont Make This Mistake 5:08 - The damaged water pump 5:46 - Draining the cooling system 7:33 - All the bolts removed from the water pump 7:52 - Pro tip on organizing your bolts 8:57 - Separating the water pump"  
[YouTube Link](https://youtube.com/watch?v=fcoKXth0w30)  2021-03-11T00:58Z 139K followers, 201.8K engagements


"12-Button Race Drift Car Off Road RGB Switch Panel - PROGRAMMABLE@WiringRescue LINKS BELOW IN DESCRIPTION. Whether you are wiring a race car drift car a Jeep or a dedicated off road vehicle the 12-gang / [--] button switch used in this video is a great way to power your accessories. It should be the same wiring style for the 6-gang / [--] button switch and the 8-gang / [--] button switch. This switch is sold by a company called CoLight and if you understand how it works you can wire up nearly any auxiliary Light Bar or accessory in your car or truck that you want. In this video we wired: - Lights -"  
[YouTube Link](https://youtube.com/watch?v=hd1jz_r2GRo)  2023-05-08T00:54Z 139K followers, 115K engagements


"How To Wire a Starter Relay Solenoid and Neutral Safety Switch on Any Car Truck @WiringRescue In this video I show how to wire a starter relay starter solenoid and neutral safety switch on an engine. I also explain how to bypass the solenoid if needed. This style starter circuit can be applied to just about any car. There are multiple ways of doing starter solenoid wiring and this video shows two different options of start wiring that I personally like. The way that a GM / Chevy starter relay is wired is different that that of an older Ford - style starter relay. In this video I show how to"  
[YouTube Link](https://youtube.com/watch?v=pX0D2JSKHg8)  2022-02-05T23:25Z 139K followers, 652.2K engagements


"Do NOT Use CO2 & Argon Mix to TIG Weld Aluminum. In this video I learn why you cannot use a CO2 & Argon has mix when TIG welding aluminum. I begin with doing an aluminum TIG test pass with the proper 100% Argon gas. Then I switch to the Argon & CO2 mix. Spoiler: It does not go well 🔔 Subscribe to This YouTube Channel: https://www.rattymusclecar.com/Subscribe 🔔 Follow me on Instagram: @Ratty_Muscle_Car https://www.rattymusclecar.com/Instagram 🔔 Join me on Facebook: https://www.rattymusclecar.com/Facebook Tags: #RattyMuscleCar #TIGWelding #TIG"  
[YouTube Link](https://youtube.com/watch?v=vB8x7AlzPUo)  2018-09-20T01:11Z 133K followers, 56.1K engagements


"How to Add Hazard Lights / [--] Way Flashers to a Turn Signal Circuit. Hotrods Cars Motorcycles In this video I show you how I would wire hazard lights (4-way flashers) into an existing turn signal circuit. This could be used for a hotrod car truck motorcycle ATV dirt bike side by side go cart or whatever kind of vehicle needs working hazard lights. There are many different methods of wiring [--] way Flashers Hazards and Turn Signals but I prefer to wire them as I describe in the video because I feel like it is a safest method. Below is a list of the relays the non-LED turn signal flasher fuses the"  
[YouTube Link](https://youtube.com/watch?v=lnhMx-fnUmI)  2021-10-05T01:54Z 139K followers, 136.5K engagements


"How to LS swap 68-72 Chevelle GTO Lemans Cutlass Skylark A-Body CHEAP - With Part Numbers Swapping an LS engine into a 1968-72 GM a-body is easily done with the right parts. This applies to the Chevelle GTO Lemans Cutlass Malibu Skylark and more. I am always building on a budget and looking for the cheapest methods of accomplishing a task. If you have the funds there are probably far better methods than what I did. I'm just sharing what worked for me. Below is a list of parts that I used and/or would recommend: - Passenger side silverado exhaust manifold - Drivers side 98-02 Camaro exhaust"  
[YouTube Link](https://youtube.com/watch?v=3ElhZbLLS-I)  2021-01-11T02:27Z 139K followers, 55.6K engagements


"How To Remove Pins From 1G DSM 4G63 ECU Connector With a Hair Clip. (Connector Cutaway) This video shows you how to remove pins from a DSM ECU connector with a hair clip. The ECM Connector shown in this video is from a 1990-94 Mitsubishi Eclipse but many automotive connectors are designed the same exact way. MORE 4G63 WIRING INFO: https://www.hotrodwiki.com/index.phptitle=How_to_wire_a_4g63_engine 🔗 Hair pins used in video: https://amzn.to/2A9DbWi 🔗 Real terminal removal tools: https://amzn.to/2WUyDvP *As an Amazon associate I earn from qualifying purchases. 🔔 Subscribe to This YouTube"  
[YouTube Link](https://youtube.com/watch?v=5I5wTcWD_DQ)  2015-11-27T16:31Z 139K followers, 338.9K engagements


"What Size Fuse and Wire ANSWERED @WiringRescue In this video I show you how to choose the right size fuse and wire size when adding new accessories to cars & trucks. This fuse sizing information can be used for adding electric fans fuel pumps stereos HID fog and LED lights and a multitude of other car accessories. TimeStamps: 0:00 Automotive Fuse Sizing for Car Accessories 0:21 Why are fuses needed and what do they do 0:54 Example 1: What is the right size fuse 1:57 What size wire to use 3:01 Example 2: How to convert Watts to Amps 7:06 Proof that wires do light on fire without a fuse. 8:44"  
[YouTube Link](https://youtube.com/watch?v=EhzN6UdnmPA)  2021-03-31T02:52Z 139K followers, 143.9K engagements


"What Makes The [----] Thunderbird SO AWESOME What makes the [----] Ford Thunderbird such a cool car Is it the big [---] cubic inch V8 The totally rad door handles that are build into the door Could it be the steering column that slides over to the right side Maybe the hidden hood release in the grille 🔔 Subscribe to This YouTube Channel: https://www.rattymusclecar.com/Subscribe 🔔 Follow me on Instagram: @Ratty_Muscle_Car https://www.rattymusclecar.com/Instagram 🔔 Join me on Facebook: https://www.rattymusclecar.com/Facebook Tags: #RattyMuscleCar #Thunderbird #FordThunderbird [----] [----] [----] 1963"  
[YouTube Link](https://youtube.com/watch?v=MdAIfI1IozE)  2020-06-06T02:27Z 139K followers, 139.3K engagements


"How to Wire Turn Signals AND Brake Lights into a ONE BULB @WiringRescue "How to wire turn signals and brake lights into a single filament bulb" is a question I often get. It is slightly tricky to do but very doable with the help of some relays and a YouTube video. The key to making there whole thing work is understanding how a relay works specifically pin 87A. That is the pin on the [--] pin Bosch style relay that allows this functionality to work. Hopefully this video helps you wire your tail lights and turn signals on your automotive project VIDEOS & PLAYLISTS: ➡ My Automotive Wiring Playlist:"  
[YouTube Link](https://youtube.com/watch?v=ZOBd_7rtv4s)  2023-04-20T12:52Z 139K followers, 146.3K engagements


"2015 Ram [----] - How to Replace Front Brake Rotors and Pads MORE PRO TIPS AND SKIP-AHEAD LINKS BELOW: 0:58 - How to Remove a Front Brake Caliper 1:59 - How to Remove the Front Brake Caliper Bracket 2:33 - How to Remove a Stuck Front Brake Rotor 3:53 - How to Install the Brake Pads into the Caliper Bracket 5:18 - How to Compress the Front Caliper Pistons 6:11 - How to Install the Front Brake Caliper In this video I show how to replace front brake pads and front rotors on a [----] Ram [----] truck. In doing so I also show how to remove the front brake caliper the stuck brake rotor and of course how"  
[YouTube Link](https://youtube.com/watch?v=bMli9s6MwFA)  2020-09-10T01:52Z 139K followers, 48.7K engagements


"1964 Chevy Impala Posi Rear End Axle Third Member Swap. GM 55-64 8.2" Carrier. I recently got a great deal on a positraction rear axle from a [----] Chevy Corvette. I knew that the third member from this Corvette rear axle was interchangeable with the 1955-64 Chevys so I decided to swap the Posi from it into my [----] Impala to get rid of my sad [--] wheel peel. This upgrade was definitely worth the effort. I began by gathering up the parts needed for the swap: - Felpro Gasket: RDS [-----] - Two Quarts of 75w-90: https://amzn.to/2DPX4ni - Posi / Limited Slip Additive: https://amzn.to/32qKwgc *As an"  
[YouTube Link](https://youtube.com/watch?v=j62juUYaJs0)  2020-07-16T19:55Z 139K followers, 18.7K engagements


"How to Take Apart a PCM ECM Connector Plug 4.8L 5.3L 6.0L LS1 How to remove / depin PCM ECM connectors for a LS-swap. This should be the same for LS1 LM7 LQ4 LQ9 L33 LSx and many other GM engine ECU wiring connectors. 4.8L 5.3L 5.7L 6.0L 6.2L. You would need to do this for an LS Engine Swap or if you are modifying the wiring harness on a GM engine. 🔔 Subscribe to This YouTube Channel: https://www.rattymusclecar.com/Subscribe 🔔 Follow me on Instagram: @Ratty_Muscle_Car https://www.rattymusclecar.com/Instagram 🔔 Join me on Facebook: https://www.rattymusclecar.com/Facebook #RattyLemans"  
[YouTube Link](https://youtube.com/watch?v=yJWzcWiRNVg)  2018-03-02T02:03Z 139K followers, 43.2K engagements


"How To Wire [--] Headlights + Pull Switch + Dimmer High Beam Switch (For Beginners) LINKS BELOW IN DESCRIPTION. In this video I explain how to wire [--] or [--] Headlights Low beams High beams Dimmer Switch High Beam switch Parking Lights Tail Lights and Dashboard Lights with a Push Pull style Headlight switch. If you are restoring a truck or building a hotrod a ratrod a UTV a ATV or anything in between the information in this video may be helpful to you. VIDEOS & PLAYLISTS: ➡ My Automotive Wiring Playlist: https://www.youtube.com/playlistlist=PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh ➡ How to wire two"  
[YouTube Link](https://youtube.com/watch?v=41uIZyRsJC4)  2024-03-08T22:00Z 139K followers, 32.1K engagements


"How to Wire ALL Car Lights to Toggle Switches (Even if You're a Novice) @WiringRescue Watch this video first: Kubota Light Switch Wiring https://youtu.be/y5Q3QOR4PnM * Parts List in Description - Check It Out ** THIS VIDEO shows how to wire racecar style toggle switches instead of the multifunction light switch to control all the same lights. In the last wiring video I explained how to wire Headlights Turn Signals Brake Lights Parking Lights Hazard Lights and Horns using a Kubota Tractor multifunction light switch. A wiring design like this would be great for a basic race car a rat rod a drag"  
[YouTube Link](https://youtube.com/watch?v=DoVHHokOBrg)  2022-08-19T22:06Z 139K followers, 189.6K engagements


"Brake Diagnostic Tips Common Reasons Why Your Disc Brake Upgrade Doesnt Work. When you change or upgrade your disc brakes and they don't work right it can be really hard to diagnose because so many parts are changed. In this video I cover the common problem areas to check out if you want to diagnose your bad brakes. 0:14 Make sure the brake master cylinder calipers and wheel cylinders are matched up properly. 0:40 Master cylinder bore size 1:07 Brake caliper piston size comparison 1:30 Wheel cylinder bore size 2:28 Front and Rear Brake caliper brackets 2:59 Brake pedal mounting hole"  
[YouTube Link](https://youtube.com/watch?v=EoZcuJnv5C0)  2020-08-05T23:45Z 139K followers, 56.4K engagements


"DIY Push Button Start Ignition Switch Wiring (For Beginners) **PARTS LIST IN DESCRIPTION BELOW** Adding a push button start ignition to a race car is pretty darn cool and these days you can easily buy all the parts you need online and have it in a couple of days. Once you have the start button and any additional switches mounted into the dashboard wiring it all together can often be overwhelming. That is why I have made this video showing how to wire a push button start to your race car for beginners. I also review some simple things like choosing the right fuse size choosing wire size how to"  
[YouTube Link](https://youtube.com/watch?v=LJ4wh_whblM)  2023-03-20T00:56Z 139K followers, 362.8K engagements


"How To Connect Your LS Swap Alternator To Your Old Car Gen Dashboard Light When you LS swap an old car you often end up with a dashboard that doesnt work right anymore. In this video I connect the LS swap alternator to my factory [----] Chevy Impala so that the dashboard Gen light turns on when the alternator stops working. It also stays off when the alternator is working. In this video I used LS alternator pigtail part number 210-0167 which is for a 1997-2011 corvette LS1 a LS6. Subscribe to This YouTube Channel: https://www.rattymusclecar.com/Subscribe Follow me on Instagram:"  
[YouTube Link](https://youtube.com/watch?v=UNJVWcS8DaA)  2020-05-16T02:58Z 129K followers, 24.2K engagements


"EASILY Swap a Floor Dimmer Switch To A Toggle High Beam Headlight Switch LINKS BELOW IN DESCRIPTION. In this video I explain how to swap your floor mounted High Beam Dimmer Switch to a Dashboard Mounted Toggle Switch. If you are restoring a truck or building a hotrod a ratrod a UTV a ATV or anything in between the information in this video may be helpful to you. VIDEOS & PLAYLISTS: ➡ My Automotive Wiring Playlist: https://www.youtube.com/playlistlist=PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh ➡ How to wire a Push/Pull Headlight switch: https://youtu.be/41uIZyRsJC4 ➡ How to wire two functions to one"  
[YouTube Link](https://youtube.com/watch?v=WWDN-as7hA0)  2024-04-13T16:39Z 139K followers, 15.1K engagements


"YesWelder TIG 205DS Welder Testing and Review Light + Simple + Great Price 🔗 YesWelder TIG 205DS: https://yeswelder.com/ref=zvnxmfrkpa Coupon code "RattyMuscleCar" What is included with the YesWelder TIG 205DS ➡ The actual YesWelder ➡ 110/220 volt adapter ➡ Torch with finger control ➡ Extra TIG torch cups & collets ➡ Pedal control ➡ Slag brush ➡ Gas hose ➡ Stinger clamp (for stick welding) ➡ Ground clamp What is needed to make the YesWelder work ➡ Electricity ➡ Welding mask ➡ Welding gloves ➡ Gas regulator ➡ 100% Argon gas tank ➡ Tungsten (2% Thoriated is what I used) ➡ TIG Filler rod (Steel"  
[YouTube Link](https://youtube.com/watch?v=bzWba7IFO3k)  2021-09-23T23:17Z 139K followers, 30.3K engagements


"2015 Jeep Cherokee Brakes BRG vs. BRF and DIY tips While replacing the brakes of my [----] Jeep Cherokee I learned quickly about BRG vs. BRF Brake options what they mean and how to determine which type are on a newer Jeep Cherokee. BRG = Dual Piston front calipers and larger 320mm (12.6) Rear rotors. BRF = Single Piston front calipers and smaller 278mm (10.95) Rear rotors. Front caliper brackets held on with E30 torx bolts torqued to [---] foot pounds. Front caliper slide bolts are 14mm and torqued to [--] foot pounds. Rear caliper brackets are held on with T55 Torx bolts torqued to [--] foot pounds."  
[YouTube Link](https://youtube.com/watch?v=gisdc3c81TY)  2019-10-27T23:13Z 118K followers, 17K engagements


"How to Wire TWO Types of Brake Light Switches - (Hydraulic and Plunger Style) @WiringRescue In this video I show you how I would wire an LED or Incandescent brake light circuit with two different style brake switches. One is a hydraulic switch and one attaches to the brake pedal. Whether you have a hotrod car truck motorcycle ATV dirt bike side by side or go cart this basic brake light circuit will get you started with some rear lights. There are many different methods of wiring brake lights and brake light switches but I prefer to wire them using a relay because I feel like it is a safest"  
[YouTube Link](https://youtube.com/watch?v=h6F9PauqvXc)  2021-08-19T21:00Z 139K followers, 203.2K engagements


"How to Easily Wire a Wiper Motor CHEAP 2-Speeds Hotrods & Off Road @WiringRescue This video shows how to easily wire a wiper motor into anything It has two speeds AND has a working park position. I used a universal windshield wiper switch a 5-pin bosch-style automotive relay and a 1987-95 Jeep Wrangler windshield wiper motor. I used the Jeep Wrangler wiper motor for several reasons: - It's a really cheap wiper motor - It looks simple and clean under a hood - It has wires coming out of it so there is no need to find a matching pigtail. - It came with the wiper transmission arm bracket - I"  
[YouTube Link](https://youtube.com/watch?v=iuqZmm9nRZs)  2022-01-21T22:00Z 139K followers, 385.7K engagements


"How to Wire Turn Signals Car Directionals Hazard Switch NO RELAYS @WiringRescue This is how I would wire an LED turn signal indicator circuit without using relays. Some people also call these lights directionals or blinkers ("Blinkahs" in Boston). This circuit diagram can be used for a hotrod car truck motorcycle ATV dirt bike side by side or whatever kind of vehicle needs a left and right turn signal. It is a [--] volt circuit and it is meant to use [----] / [----] style LED bulbs. Below is a list of the LED turn signal flashers fuses & fuse holders the [----] / [----] style bulb sockets the LED bulbs"  
[YouTube Link](https://youtube.com/watch?v=uXiEoJVtHi8)  2022-03-07T23:23Z 139K followers, 208.2K engagements


"How to Wire a [--] Pin Apiele Halo Push Button Switch With AND Without a Relay. **PARTS LIST IN DESCRIPTION BELOW** In this video I demonstrate how to wire a [--] pin apiele halo style push button LED switch. This would be similar to many other [--] wire switches that have the same normally open & normally closed wires along with a halo style LED inside. In general this video covers switch wiring for race cars toggle switch wiring halo switch wiring rocker switch wiring [--] and [--] pin switch wiring [--] pin apiele halo switch wiring [--] pin relay wiring automotive wiring car wiring basics wiring switches in a"  
[YouTube Link](https://youtube.com/watch?v=wWCSUBzHMd8)  2025-01-17T12:44Z 139K followers, 35.2K engagements


"How To Remove Pins / Wires From A Delphi Style Connector With A Hair Clip. GM LS Alternator LS1 Automotive connectors are tricky to de-pin. I take the mystery out of this GM Alternator connector plug and show you how to remove the wires from it with hair clip. Once you know the trick to do it its surprisingly easy to do Subscribe To This YouTube Channel: http://www.youtube.com/user/4g63mightymaxsub_confirmation=1 Follow Me on Instagram: @Ratty_Muscle_Car https://www.instagram.com/ratty_muscle_car/ Buy the Hair Pins: https://amzn.to/2A9DbWi TAGS: #rattymusclecar #wiring #WiringRescue Please"  
[YouTube Link](https://youtube.com/watch?v=ylL_UcA2URg)  2020-05-15T02:20Z 103K followers, 26.9K engagements


"How to Wire a [--] Pin Apiele Halo Push Button Switch With AND Without a Relay. **PARTS LIST IN DESCRIPTION BELOW** In this video I demonstrate how to wire a [--] pin apiele halo style push button LED switch. This would be similar to many other [--] wire switches that have the same normally open & normally closed wires along with a halo style LED inside. In general this video covers switch wiring for race cars toggle switch wiring halo switch wiring rocker switch wiring [--] and [--] pin switch wiring [--] pin apiele halo switch wiring [--] pin relay wiring automotive wiring car wiring basics wiring switches in a"  
[YouTube Link](https://youtube.com/watch?v=wWCSUBzHMd8)  2025-01-17T12:44Z 139K followers, 35.2K engagements


"How to Wire 12v Switches LED Halo Toggle Rocker Combination FOR BEGINNERS **PARTS LIST IN DESCRIPTION BELOW** In this video I demonstrate how to use continuity on a multimeter to determine how to wire any type of 12v switch with and without a relay. This includes a simple [--] wire switch a [--] wire illuminated LED switch a [--] wire Apiele Halo LED switch push-buttons switches and the Kubota-tractor-style switch that many drag racers use for drag and drive race cars. In general this video covers diagnosis for race car switch wiring toggle switch wiring halo switch wiring rocker switch wiring [--] and 3"  
[YouTube Link](https://youtube.com/watch?v=u51X056EhH4)  2024-12-19T00:26Z 139K followers, 41.9K engagements


"12V Automotive Wiring Diagnosis - Continuity For Beginners @WiringRescue **PARTS LIST IN DESCRIPTION BELOW** In this video I demonstrate how to use continuity on a multimeter to diagnose and fix 12V DC automotive wiring problems. Start with setting the DVOM (digital volt ohm meter) to Ohms and then find which wires are continuous and which wires are not. Common problems are: - Damaged wires - Loose connectors - Blown / popped fuses - Open circuits - Power & Grounds - Butt connectors - Damaged switches In general this video covers diagnosis for race car wiring alternator wiring automotive"  
[YouTube Link](https://youtube.com/watch?v=YpJOYwiQDHk)  2024-09-06T12:00Z 139K followers, 43.2K engagements


"EASILY Swap a Floor Dimmer Switch To A Toggle High Beam Headlight Switch LINKS BELOW IN DESCRIPTION. In this video I explain how to swap your floor mounted High Beam Dimmer Switch to a Dashboard Mounted Toggle Switch. If you are restoring a truck or building a hotrod a ratrod a UTV a ATV or anything in between the information in this video may be helpful to you. VIDEOS & PLAYLISTS: ➡ My Automotive Wiring Playlist: https://www.youtube.com/playlistlist=PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh ➡ How to wire a Push/Pull Headlight switch: https://youtu.be/41uIZyRsJC4 ➡ How to wire two functions to one"  
[YouTube Link](https://youtube.com/watch?v=WWDN-as7hA0)  2024-04-13T16:39Z 139K followers, 15.1K engagements


"How To Wire [--] Headlights + Pull Switch + Dimmer High Beam Switch (For Beginners) LINKS BELOW IN DESCRIPTION. In this video I explain how to wire [--] or [--] Headlights Low beams High beams Dimmer Switch High Beam switch Parking Lights Tail Lights and Dashboard Lights with a Push Pull style Headlight switch. If you are restoring a truck or building a hotrod a ratrod a UTV a ATV or anything in between the information in this video may be helpful to you. VIDEOS & PLAYLISTS: ➡ My Automotive Wiring Playlist: https://www.youtube.com/playlistlist=PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh ➡ How to wire two"  
[YouTube Link](https://youtube.com/watch?v=41uIZyRsJC4)  2024-03-08T22:00Z 139K followers, 32.1K engagements


"Are LED Bulbs Actually Energy Savers #automotivewiring #diy #wiring #headlightswitch #electronics LINKS BELOW IN DESCRIPTION. In this video I test out whether LED bulbs ACTUALLY use less electricity in an automotive circuit. I test this with a headlight-style circuit which uses a push-pull headlight switch [----] bulbs [----] bulbs [----] bulbs [---] bulbs and a high beam dimmer switch. VIDEOS & PLAYLISTS: ➡ My Automotive Wiring Playlist: https://www.youtube.com/playlistlist=PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh ➡ How to wire two functions to one bulb: https://youtu.be/ZOBd_7rtv4s ➡ How to wire turn"  
[YouTube Link](https://youtube.com/watch?v=zYG1VgHbRQA)  2024-03-08T00:05Z 139K followers, 23.3K engagements


"Connect Your Phone To This Fuse Panel with BLUETOOTH (Locks Windows Horn Fuel Pump & More) LINKS BELOW IN DESCRIPTION. If you need to wire up your drift car drag car Jeep or 4x4 off road vehicle the 8-gang / [--] button switch used in this video is a great way to power your accessories. This switch is sold by a company called CoLight and if you understand how it works you can wire up nearly any auxiliary Light Bar or accessory in your car or truck that you want. In this video we wired: - Lights - Turn Signals - Horn - Power Window Motor - [--] Pin Relays - Fuel Pump - Door Lock Actuator Hopefully"  
[YouTube Link](https://youtube.com/watch?v=XyO4hKdzUOs)  2024-01-07T18:30Z 139K followers, 16.5K engagements


"12-Button Race Drift Car Off Road RGB Switch Panel - PROGRAMMABLE@WiringRescue LINKS BELOW IN DESCRIPTION. Whether you are wiring a race car drift car a Jeep or a dedicated off road vehicle the 12-gang / [--] button switch used in this video is a great way to power your accessories. It should be the same wiring style for the 6-gang / [--] button switch and the 8-gang / [--] button switch. This switch is sold by a company called CoLight and if you understand how it works you can wire up nearly any auxiliary Light Bar or accessory in your car or truck that you want. In this video we wired: - Lights -"  
[YouTube Link](https://youtube.com/watch?v=hd1jz_r2GRo)  2023-05-08T00:54Z 139K followers, 115K engagements


"How to Wire Turn Signals AND Brake Lights into a ONE BULB @WiringRescue "How to wire turn signals and brake lights into a single filament bulb" is a question I often get. It is slightly tricky to do but very doable with the help of some relays and a YouTube video. The key to making there whole thing work is understanding how a relay works specifically pin 87A. That is the pin on the [--] pin Bosch style relay that allows this functionality to work. Hopefully this video helps you wire your tail lights and turn signals on your automotive project VIDEOS & PLAYLISTS: ➡ My Automotive Wiring Playlist:"  
[YouTube Link](https://youtube.com/watch?v=ZOBd_7rtv4s)  2023-04-20T12:52Z 139K followers, 146.3K engagements


"How to remove pins from a connector / Depinning Connector "How to remove pins from a connector" or "How to depin a connector" are really common questions I get from friends when they are wrenching on their cars. Year ago I discovered a really easy way to de-pin wires from connectors using a hair clip with some minor modifications and I'm showing you exactly that in this video. This specific wiring connector is from a fuel injector and I cut one in half so that you could see the cutaway version with the terminals and have a better understanding of what is inside. Hopefully it helps you out"  
[YouTube Link](https://youtube.com/watch?v=sfiJYyqYcfY)  2023-04-01T14:34Z 139K followers, 308.1K engagements


"DIY Push Button Start Ignition Switch Wiring (For Beginners) **PARTS LIST IN DESCRIPTION BELOW** Adding a push button start ignition to a race car is pretty darn cool and these days you can easily buy all the parts you need online and have it in a couple of days. Once you have the start button and any additional switches mounted into the dashboard wiring it all together can often be overwhelming. That is why I have made this video showing how to wire a push button start to your race car for beginners. I also review some simple things like choosing the right fuse size choosing wire size how to"  
[YouTube Link](https://youtube.com/watch?v=LJ4wh_whblM)  2023-03-20T00:56Z 139K followers, 362.8K engagements


"Power Window Motor Car Wiring - FOR BEGINNERS @WiringRescue **PARTS LIST IN DESCRIPTION BELOW** Power window motors can be wired many different ways for many different purposes. This video shows the two ways of how to wire a window motor. One method does not use any relays. The other method uses two [--] pin Bosch style relays. I also explain how the switches work in each circuit and why I might choose one window motor wiring method over the other. Whether you are wiring window motors in your race car or daily driver this wiring diagram should help VIDEOS & PLAYLISTS: ➡This is my video on how to"  
[YouTube Link](https://youtube.com/watch?v=Avo_35OUCPM)  2023-02-26T18:00Z 139K followers, 358.4K engagements


"5 Pin Relay Wiring For Beginners Diagram @WiringRescue **PARTS LIST IN DESCRIPTION BELOW** [--] pin relay wiring can be done many different ways. The two most common ways to wire a [--] pin relay is with a positive trigger and with a negative trigger. Each method has its own benefits. In this video I show how to wire a relay each way and how the relay actually works. Rather than trying to read a relay wiring diagram this video provides the guidance you need to do it yourself without the confusion from schematics. Many people call this type of relay a Bosch type relay because that is the company"  
[YouTube Link](https://youtube.com/watch?v=QCkfFCLa_Jg)  2023-01-13T22:00Z 139K followers, 180.6K engagements


"Fuel Pump Inertia Switch Wiring for Beginners (With a Relay) @WiringRescue **PARTS LIST IN DESCRIPTION BELOW** In this video I show how I wired an inertia switch and fuel pump relay into an electric fuel pump circuit. I use a [--] pin relay two inline fuses a single pole single throw switch and an external fuel pump for the demonstration. This type of circuit is great for if you are wiring a race car a hotrod or just learning the basics of car wiring. Hopefully you enjoy the video VIDEOS & PLAYLISTS: ➡ This is my video on how to choose the right fuse and wire sizes when building a circuit:"  
[YouTube Link](https://youtube.com/watch?v=MHgMHE6TUG8)  2022-11-07T22:40Z 139K followers, 627K engagements


"Hotrod Race car Drift car Wiring for Beginners. (Alternator Battery Switch Fuse Box Starter) **PARTS LIST IN DESCRIPTION BELOW** In this video I show the basics of wiring for a hotrod drift car ratty muscle car or race car. I include how I wired a GM 3-wire 10si / 12si Alternator along with a 12v automotive fuse box and a starter circuit. I used 200A Cole Hersee Relays power the fuse box and the starter. I discuss the differences between a continuous use vs non-continuous use solenoids and the importance of using diodes. In general this video covers car wiring race car wiring alternator"  
[YouTube Link](https://youtube.com/watch?v=Yz9kqxWkoHI)  2022-10-23T14:00Z 139K followers, 4M engagements


"GM 1-Wire Alternator Voltage Regulator Swap (Tested w/ Drill) If you want a longer form video of this and how it works please leave me a comment below While making a new wiring video for your viewing pleasure I discovered that my brand new alternator was dead. So - I swapped out the voltage regulator real quick and gave it a test with a drill. It now works great. Alternator [--] wire alternator Voltage regulator Internal voltage regulator Replacement Gm [--] wire alternator 12si 10si voltage regulator replacement Alternator [--] wire alternator Voltage regulator Internal voltage regulator Replacement"  
[YouTube Link](https://youtube.com/watch?v=qp-OAKFK0Lc)  2022-10-03T13:30Z 139K followers, 10.1K engagements


"How to Wire ALL Car Lights to Toggle Switches (Even if You're a Novice) @WiringRescue Watch this video first: Kubota Light Switch Wiring https://youtu.be/y5Q3QOR4PnM * Parts List in Description - Check It Out ** THIS VIDEO shows how to wire racecar style toggle switches instead of the multifunction light switch to control all the same lights. In the last wiring video I explained how to wire Headlights Turn Signals Brake Lights Parking Lights Hazard Lights and Horns using a Kubota Tractor multifunction light switch. A wiring design like this would be great for a basic race car a rat rod a drag"  
[YouTube Link](https://youtube.com/watch?v=DoVHHokOBrg)  2022-08-19T22:06Z 139K followers, 189.6K engagements


"How to Wire Headlights Turn Signals Brake Lights Parking Lights Hazards Horn Kubota Switch ** Parts List in Description - Check It Out ** In this video I explain how to wire Headlights Turn Signals Brake Lights Parking Lights Hazard Lights and Horns using a Kubota Tractor multifunction light switch. Don't like the Kubota switch That's okay You can use nearly any kind of switches that you want if you are using relays. If you are wiring a race car for a drag and drive race a hotrod a ratrod a UTV a ATV or anything in between the information in this video may be helpful to you. In the first"  
[YouTube Link](https://youtube.com/watch?v=y5Q3QOR4PnM)  2022-07-21T01:54Z 139K followers, 1.3M engagements


"Can a YesWelder Plasma Cutter Cut 1/2" Steel What is included with the YesWelder CUT-65DS Plasma Cutter ➡ The actual Plasma Cutter ➡ 110/220 volt adapter ➡ Torch with trigger safety ➡ Ground clamp ➡ Air pressure regulator ➡ Various fittings What is needed to make the YesWelder CUT-65DS Plasma Cutter work ➡ Electricity ➡ Protective mask ➡ Protective gloves ➡ Compressed air ➡ Are hose fitting ➡ Practice What is the thickest metal that the YesWelder CUT-65DS can cut through ➡ When using 220V power I was able to cut through 1/2" steel. I'm not sure what the actual limit is but that is what I was"  
[YouTube Link](https://youtube.com/watch?v=hLa-ccjx9L8)  2022-05-31T11:58Z 139K followers, [----] engagements


"How To Remove / Depin Terminals From [--] Pin Relay Connector @WiringRescue In this video I show to how remove terminals / depin a [--] pin relay connector. Removing pins like this can easily be done with a hair clip which can be bought at any grocery store or pharmacy near you. Simply bend the hair clip remove the rubber nub on the end and use it to pull terminals out of the electrical connector. This method can be used for many different spade terminals when depinning a connector. Some Items I like: 🔗 [--] Pack of 5-pin Bosch Style Relays - https://amzn.to/2OfiwXT 🔗 Hair pins used in video:"  
[YouTube Link](https://youtube.com/watch?v=pELf2s0xPAs)  2022-04-17T02:11Z 139K followers, 99.2K engagements


"How to Wire Turn Signals Car Directionals Hazard Switch NO RELAYS @WiringRescue This is how I would wire an LED turn signal indicator circuit without using relays. Some people also call these lights directionals or blinkers ("Blinkahs" in Boston). This circuit diagram can be used for a hotrod car truck motorcycle ATV dirt bike side by side or whatever kind of vehicle needs a left and right turn signal. It is a [--] volt circuit and it is meant to use [----] / [----] style LED bulbs. Below is a list of the LED turn signal flashers fuses & fuse holders the [----] / [----] style bulb sockets the LED bulbs"  
[YouTube Link](https://youtube.com/watch?v=uXiEoJVtHi8)  2022-03-07T23:23Z 139K followers, 208.2K engagements


"How To Wire a Starter Relay Solenoid and Neutral Safety Switch on Any Car Truck @WiringRescue In this video I show how to wire a starter relay starter solenoid and neutral safety switch on an engine. I also explain how to bypass the solenoid if needed. This style starter circuit can be applied to just about any car. There are multiple ways of doing starter solenoid wiring and this video shows two different options of start wiring that I personally like. The way that a GM / Chevy starter relay is wired is different that that of an older Ford - style starter relay. In this video I show how to"  
[YouTube Link](https://youtube.com/watch?v=pX0D2JSKHg8)  2022-02-05T23:25Z 139K followers, 652.2K engagements


"How To Wire An Electric Radiator Fan Relay Temp Sensor AND Switch @WiringRescue This video shows how to easily wire an electric radiator fan circuit into any car. This fan wiring diagram includes a fan relay a temperature switch and a manual on/of switch that can be used to manually turn on the fan whenever you want. This radiator fan wiring circuit is great when building a hotrod muscle car or anytime that you're swapping from a clutch fan to an electric fan. The Electric Radiator Fan Relay Wiring: - Pin [--] (Red) 12v input from battery through circuit breaker - Pin [--] (Black) 12v power feed"  
[YouTube Link](https://youtube.com/watch?v=9Hj7Ri3TXhc)  2022-01-30T03:30Z 139K followers, 1.2M engagements


"How to Easily Wire a Wiper Motor CHEAP 2-Speeds Hotrods & Off Road @WiringRescue This video shows how to easily wire a wiper motor into anything It has two speeds AND has a working park position. I used a universal windshield wiper switch a 5-pin bosch-style automotive relay and a 1987-95 Jeep Wrangler windshield wiper motor. I used the Jeep Wrangler wiper motor for several reasons: - It's a really cheap wiper motor - It looks simple and clean under a hood - It has wires coming out of it so there is no need to find a matching pigtail. - It came with the wiper transmission arm bracket - I"  
[YouTube Link](https://youtube.com/watch?v=iuqZmm9nRZs)  2022-01-21T22:00Z 139K followers, 385.7K engagements


"How To Wire Turn Signals Brake Lights Parking Lamps and Hazard Circuit Switch @WiringRescue In this video we wire a turn signal brake light parking light and hazard light switch (4-way flasher) circuit. I use the American Autowire [------] turn signal switch along with two single throw double pole switches to control the whole circuit. I also use four [----] two-filament light bulbs two novita 2-pin flashers and four fused wires. This style electrical circuit could be used for a hotrod car truck motorcycle ATV side by side or maybe even an electric bike. Its up to you 0:00 How to wire a parking"  
[YouTube Link](https://youtube.com/watch?v=Io_i9016o10)  2022-01-14T22:00Z 139K followers, 225.2K engagements


"How to Wire a Horn Relay Circuit EASILY in your Car / Truck / Motorcycle / ATV / Dirt Bike In this video I explain how to wire a set of horns into any vehicle that you want. This is the way that I like to wire horns because it uses a negative trigger wire. This is beneficial because you dont need to run any power wire into the interior of the vehicle just a ground. This makes building this circuit easier and safer. 0:00 How to easily wire horns on a car truck atv snowmobiles side by sides etc. 0:20 Low tone and high tone horns 0:43 The benefits of ground trigger relay 1:26 List of needed"  
[YouTube Link](https://youtube.com/watch?v=eu0vQKKDVho)  2021-10-09T14:47Z 139K followers, 334.5K engagements


"How to Fix Your LED Turn Signal Bulbs that Don't Flash. Make Them Blink @WiringRescue In this video I explain how to fix your LED turn signal bulbs that don't flash when installed into a car truck or motorcycle. In short it is because LED lights do not draw enough electricity (amperage) through the older style turn signal flashers to make them flash properly. The fix for this problem is to replace the older style turn signal flasher with a more modern LED turn signal flasher. LED flashers have tiny circuit boards inside them and do not require the same amount of electricity flowing through"  
[YouTube Link](https://youtube.com/watch?v=GICmEd-745Y)  2021-10-05T23:41Z 139K followers, 145.9K engagements


"How to Add Hazard Lights / [--] Way Flashers to a Turn Signal Circuit. Hotrods Cars Motorcycles In this video I show you how I would wire hazard lights (4-way flashers) into an existing turn signal circuit. This could be used for a hotrod car truck motorcycle ATV dirt bike side by side go cart or whatever kind of vehicle needs working hazard lights. There are many different methods of wiring [--] way Flashers Hazards and Turn Signals but I prefer to wire them as I describe in the video because I feel like it is a safest method. Below is a list of the relays the non-LED turn signal flasher fuses the"  
[YouTube Link](https://youtube.com/watch?v=lnhMx-fnUmI)  2021-10-05T01:54Z 139K followers, 136.5K engagements


"YesWelder TIG 205DS Welder Testing and Review Light + Simple + Great Price 🔗 YesWelder TIG 205DS: https://yeswelder.com/ref=zvnxmfrkpa Coupon code "RattyMuscleCar" What is included with the YesWelder TIG 205DS ➡ The actual YesWelder ➡ 110/220 volt adapter ➡ Torch with finger control ➡ Extra TIG torch cups & collets ➡ Pedal control ➡ Slag brush ➡ Gas hose ➡ Stinger clamp (for stick welding) ➡ Ground clamp What is needed to make the YesWelder work ➡ Electricity ➡ Welding mask ➡ Welding gloves ➡ Gas regulator ➡ 100% Argon gas tank ➡ Tungsten (2% Thoriated is what I used) ➡ TIG Filler rod (Steel"  
[YouTube Link](https://youtube.com/watch?v=bzWba7IFO3k)  2021-09-23T23:17Z 139K followers, 30.3K engagements


"How Does a Turn Signal Flasher Relay Blink The Lights on Your Car Truck Motorcycle How does a turn signal flasher relay blink the lights on your car How does a flasher work Do you want to actually SEE the clicking noise happen in REAL TIME Well this video reveals this mystery. You see it's the turn signal flasher making that clicking noise that you hear. Now the turn signal flasher has a bimetallic spring inside of it that heats up as the electricity flows through it. When it warms up the little metal spring bends and breaks the electrical connection for the turn signal which turns the lights"  
[YouTube Link](https://youtube.com/watch?v=rpVB49LOEPM)  2021-08-21T21:00Z 139K followers, 68.3K engagements


"How to Wire TWO Types of Brake Light Switches - (Hydraulic and Plunger Style) @WiringRescue In this video I show you how I would wire an LED or Incandescent brake light circuit with two different style brake switches. One is a hydraulic switch and one attaches to the brake pedal. Whether you have a hotrod car truck motorcycle ATV dirt bike side by side or go cart this basic brake light circuit will get you started with some rear lights. There are many different methods of wiring brake lights and brake light switches but I prefer to wire them using a relay because I feel like it is a safest"  
[YouTube Link](https://youtube.com/watch?v=h6F9PauqvXc)  2021-08-19T21:00Z 139K followers, 203.2K engagements


"How to Wire LED Turn Signals / Flashers to ANYTHING Hotrods Motorcycles ATVs Mopeds Cars In this video I show you how I would wire LED bulb turn signals directionals blinker circuit for a hotrod car truck motorcycle ATV dirt bike side by side go cart or whatever kind of vehicle needs a left and right turn signal. There are many different methods of wiring LED automotive style turn signals but I prefer to wire them using two relays because I feel like it is a safest method of wiring the circuit. Below is a list of the relays the LED and non-LED turn signal flashers fuses the incandescent and"  
[YouTube Link](https://youtube.com/watch?v=hDmER_pNask)  2021-08-18T03:50Z 139K followers, 117.8K engagements


"How To Remove A Broken Bolt [--] DIFFERENT WAYS - LS Exhaust Manifold How to remove a broken bolt you ask I've got [--] PROVEN ways of removing broken bolts. These bolts have been in the cylinder head of a 5.3L LM7 V8 engine holding the exhaust manifold on for [------] miles so they are massively rusty and stuck I cut the heads off of all the manifold bolts and then provide [--] bolt removal methods for you to try on your own engine. Some work better than others. In general this video covers how to remove a broken bolt broken bolt removal how to remove broken bolt remove broken bolt bolt extractor"  
[YouTube Link](https://youtube.com/watch?v=x_ky5JVxtqU)  2021-07-12T22:41Z 139K followers, 2.1M engagements


"Remove a Broken Intake Manifold Bolt. 5.3L 4.8L 6.0L LM7 LS Swap In this video I show you how to easily remove a broken intake manifold bolt with a washer and a welder. This process is on a 5.3L LM7 (LS style) engine but it's the same as a 4.8L or a [---] and probably even the 6.2L. This problem is really common on LS swap engines because people tighten old intake manifold bolts too tight and they are very easy to snap off. To get the broken bolt out the most important factor is the get good weld penetration of the broken off bolt. Once it is welded to the washer you have more options. You can"  
[YouTube Link](https://youtube.com/watch?v=bfvg7LciLRM)  2021-07-02T02:27Z 139K followers, 21.1K engagements


"How to Replace Front Differential GMC Yukon Chevy Tahoe Suburban Avalanche GM GMC Truck SUV In this video I show how I replaced the front differential in this [----] GMC Yukon. This truck has around [------] miles and had a loud whining noise coming from the front differential when the transmission was set to "auto" mode. Setting it to "2wd" would make the drivetrain whine go away. This problem happened because it was kept in "auto" mode its entire life. If the truck was kept in "2wd" mode instead the front differential likely would not have worn out. So after this repair it will be kept in "2wd""  
[YouTube Link](https://youtube.com/watch?v=ZaZvo93dnmQ)  2021-04-16T22:00Z 139K followers, 45.3K engagements


"What Size Fuse and Wire ANSWERED @WiringRescue In this video I show you how to choose the right size fuse and wire size when adding new accessories to cars & trucks. This fuse sizing information can be used for adding electric fans fuel pumps stereos HID fog and LED lights and a multitude of other car accessories. TimeStamps: 0:00 Automotive Fuse Sizing for Car Accessories 0:21 Why are fuses needed and what do they do 0:54 Example 1: What is the right size fuse 1:57 What size wire to use 3:01 Example 2: How to convert Watts to Amps 7:06 Proof that wires do light on fire without a fuse. 8:44"  
[YouTube Link](https://youtube.com/watch?v=EhzN6UdnmPA)  2021-03-31T02:52Z 139K followers, 143.9K engagements


"2009-18 Dodge Ram [----] 5.7L Hemi Water Pump Waterpump Replacement Repair How To PRO TIPS SKIP-AHEAD LINKS PARTS LIST BELOW: 3:14 - Dont Make This Mistake 12:15 - How I fixed my mistake. SKIP AHEAD LINKS: 0:00 2009-18 Dodge Ram [----] 5.7L Hemi Water Pump Replacement 0:09 - Signs of a bad water pump 1:00 - Two methods of removing a fan clutch 2:22 - Removing the plastic fan shroud 3:14 - Dont Make This Mistake 5:08 - The damaged water pump 5:46 - Draining the cooling system 7:33 - All the bolts removed from the water pump 7:52 - Pro tip on organizing your bolts 8:57 - Separating the water pump"  
[YouTube Link](https://youtube.com/watch?v=fcoKXth0w30)  2021-03-11T00:58Z 139K followers, 201.8K engagements


"1G 4G63 DSM MPI Relay Fuel Pump ECU Ignition Coil Wiring Mitsubishi Eclipse Talon Laser ALL 4G63 DSM MPI WIRING DETAILS IN DESCRIPTION BELOW: In this video I show you how to wire a 1G DSM 4G63 MPI relay. A 1G DSM includes the [----] [----] [----] [----] [----] Mitsubishi Eclipse Eagle Talon and Plymouth Laser. When doing a 4G63 turbo engine swap into another car this MPI relay is usually the most confusing part of the wiring harness. I do my best to show you what the MPI relay does and how to properly wire it. 4G63 Wiring Diagrams Here:"  
[YouTube Link](https://youtube.com/watch?v=-uPaY0wBpWU)  2021-03-03T03:14Z 139K followers, 27.6K engagements


"How to Wire a Headlight Relay for Sealed Beam Round & Rectangle Lights w/ Floor Dimmer Switch. This video shows to how to wire a headlight relay for a pair of Round or Rectangle sealed beam headlights with a floor mounted high beam dimmer switch. I use a modern [--] pin bosch style relay and switch instead of a giant old school style headlight switch. Relay Info & Part List Below: 0:12 H6024 7" Round Sealed Beam Headlight 0:53 H6054 Rectangle Sealed Beam Headlight 1:37 Why old cars have giant headlight switches 2:00 Why to use a headlight relay 2:11 DS72 Floor Mounted Dimmer Switch 2:45 Dual"  
[YouTube Link](https://youtube.com/watch?v=0h_ZbIBHM-M)  2021-02-16T22:16Z 139K followers, 206.6K engagements


"How To Wire a Turn Signal Flasher Relay Directional Blinker on a Car / Truck / ATV / Motorcycle In this video I show you how I would wire an automotive flasher relay (which is also called a turn signal directional and blinker circuit) for a car truck motorcycle ATV dirt bike side by side go cart or whatever kind of vehicle needs a left and right turn signal. There are many ways to wire automotive style turn signals but I prefer to wire them using two relays because I feel like it is a safest method of wiring the signal lights. Below is a list of the relays the turn signal flasher fuses the"  
[YouTube Link](https://youtube.com/watch?v=c8JDQrUquw8)  2021-02-09T04:12Z 139K followers, 711.5K engagements


"How to LS swap 68-72 Chevelle GTO Lemans Cutlass Skylark A-Body CHEAP - With Part Numbers Swapping an LS engine into a 1968-72 GM a-body is easily done with the right parts. This applies to the Chevelle GTO Lemans Cutlass Malibu Skylark and more. I am always building on a budget and looking for the cheapest methods of accomplishing a task. If you have the funds there are probably far better methods than what I did. I'm just sharing what worked for me. Below is a list of parts that I used and/or would recommend: - Passenger side silverado exhaust manifold - Drivers side 98-02 Camaro exhaust"  
[YouTube Link](https://youtube.com/watch?v=3ElhZbLLS-I)  2021-01-11T02:27Z 139K followers, 55.6K engagements


"How to Replace a 2016-19 Chevy Suburban 5.3L Water Pump Replacement # [--------] Yukon Tahoe Waterpump PARTS LIST + TOOLS LIST + PRO TIPS + SKIP-AHEAD LINKS BELOW: This is how to replace the waterpump on a [----] Chevy Suburban LT [----] 5.3L L83 engine. This water pump has [------] miles and was making a lot of rotational noise and beginning to weep antifreeze (dexcool) out of the front of the water pump housing. Upon inspection the water pump pulley was also very loose which meant the front waterpump bearing was the cause of the rotational noise that I was hearing. In this new LS style engine"  
[YouTube Link](https://youtube.com/watch?v=k07HXyGc7kc)  2020-12-28T17:48Z 139K followers, 64.8K engagements


"How To Wire a [--] or [--] Pin Relay With a Negative Trigger Wire. In this video I explain why it is necessary to use a relay in a circuit. I then demonstrate how to wire a [--] pin relay with a negative trigger wire. The benefits of using a negative trigger wire on a [--] pin relay would be - one less power wire going to the relay and not needing a power wire feeding your switch. This may be beneficial depending on what type of accessories you are wiring into your car or truck. You could use this method for a radiator fan fuel pump headlights fog lights spot lights LED lights and probably hundreds of"  
[YouTube Link](https://youtube.com/watch?v=QAD8vDHTbzo)  2020-12-09T03:31Z 139K followers, 333.9K engagements


"How to Replace a Silverado 4WD Engine Mount / Motor Mount Passenger Side. [----] Chevy Truck. In this video I replace a passenger side motor mount / engine mount on a [----] Chevy Silverado 4x4. The engine mount in this truck was damaged and needed replacement. This repair should be similar on all 2007-2013 Chevy and GMC full size trucks and SUV's like Silverado Sierra Tahoe Yukon Suburban Denali and Escalade. 🔔 Subscribe to This YouTube Channel: https://www.rattymusclecar.com/Subscribe 🔔 Follow me on Instagram: @Ratty_Muscle_Car https://www.rattymusclecar.com/Instagram 🔔 Join me on Facebook:"  
[YouTube Link](https://youtube.com/watch?v=v7IaQ5-e8V8)  2020-12-06T00:00Z 139K followers, 80.5K engagements


"How To Wire Electric Fuel Pump Relay / Bypass / Rewire / Hardwire Upgrade In this video I show how a fuel pump relay works and how to bypass yours. I also show how to rewire your fuel pump for an upgraded fuel system or race car. Aftermarket [--] pin bosch style fuel pump relays can easily be wired into any car and made to work with nearly any electric fuel pump scenario you can come up with. This info could apply to any Bosch [---] style pump AEM external pumps or even a Walbro [---] fuel pump. Pin [--] - Incoming 12v to relay from battery Pin [--] - Outgoing from relay to electric fuel pump power. Pin"  
[YouTube Link](https://youtube.com/watch?v=8GjvRdssvFI)  2020-10-15T23:48Z 139K followers, 843.1K engagements


"Pontiac Lemans car RESTORATION Time Lapse Rear Window Sheetmetal Package Shelf GM A-Body I combined [--] months of restoration footage from my [----] Pontiac Lemans LS Swap project car and turned it into a time lapse video. You can watch the entire rear package shelf removal and installation along with a ton of sheetmetal fabrication and repair around the rear window. Along with the rear package shelf being swapped out I also replaced the package shelf extension and all the metal that holds the glass in place. This car had no shortage of rust and rot. It was a mess that required months of MIG and"  
[YouTube Link](https://youtube.com/watch?v=9RnLKZEZyME)  2020-10-09T04:15Z 139K followers, 11.4K engagements


"2015 Ram [----] - How to Replace Front Brake Rotors and Pads MORE PRO TIPS AND SKIP-AHEAD LINKS BELOW: 0:58 - How to Remove a Front Brake Caliper 1:59 - How to Remove the Front Brake Caliper Bracket 2:33 - How to Remove a Stuck Front Brake Rotor 3:53 - How to Install the Brake Pads into the Caliper Bracket 5:18 - How to Compress the Front Caliper Pistons 6:11 - How to Install the Front Brake Caliper In this video I show how to replace front brake pads and front rotors on a [----] Ram [----] truck. In doing so I also show how to remove the front brake caliper the stuck brake rotor and of course how"  
[YouTube Link](https://youtube.com/watch?v=bMli9s6MwFA)  2020-09-10T01:52Z 139K followers, 48.7K engagements


"2015 Ram [----] - How to Replace Rear Brake Rotors Pads & Parking Brake Shoes MORE PRO TIPS AND SKIP-AHEAD LINKS BELOW: 0:00 - How to replace the rear brakes on a Ram [----] 0:30 - How to Remove a Rear Brake Caliper 1:26 - How to Remove the Rear Brake Caliper Bracket 2:19 - How to Remove a Stuck Brake Rotor 6:15 - What a Damaged Brake Rotor Looks Like 8:00 - How to remove the Parking Brake Shoes 12:42 - How to Install Parking Brake Shoes 15:33 - How to Install a Rear Brake Rotor 15:43 - Dont Make This Mistake 17:22 - How to Compress the Brake Caliper Piston 18:15 - How to Install Brake Pads 19:27"  
[YouTube Link](https://youtube.com/watch?v=V9FPugNXx6s)  2020-09-06T13:07Z 139K followers, 171.3K engagements


"Rust Removal: Naval Jelly vs. Muriatic Acid - Who Wins I wanted to know which worked better at dissolving rust - Naval Jelly or Muriatic Acid. I let both rusty parts from my Ratty Muscle Car with the Naval Jelly and Muriatic Acid for about [--] minutes and was surprised at the difference. If you do decide to try these products please follow all safety precautions on their packaging. They are dangerous. Subscribe to This YouTube Channel: https://www.rattymusclecar.com/Subscribe Follow me on Instagram: @Ratty_Muscle_Car https://www.rattymusclecar.com/Instagram Join me on Facebook:"  
[YouTube Link](https://youtube.com/watch?v=HmLM7C225O8)  2020-08-26T03:38Z 139K followers, 17.4K engagements


"Brake Diagnostic Tips Common Reasons Why Your Disc Brake Upgrade Doesnt Work. When you change or upgrade your disc brakes and they don't work right it can be really hard to diagnose because so many parts are changed. In this video I cover the common problem areas to check out if you want to diagnose your bad brakes. 0:14 Make sure the brake master cylinder calipers and wheel cylinders are matched up properly. 0:40 Master cylinder bore size 1:07 Brake caliper piston size comparison 1:30 Wheel cylinder bore size 2:28 Front and Rear Brake caliper brackets 2:59 Brake pedal mounting hole"  
[YouTube Link](https://youtube.com/watch?v=EoZcuJnv5C0)  2020-08-05T23:45Z 139K followers, 56.4K engagements

Limited data mode. Full metrics available with subscription: lunarcrush.com/pricing