#  @mmplumber mmplumber mmplumber posts on YouTube about diy, how to, copper, howto the most. They currently have [-------] followers and [---] posts still getting attention that total [---------] engagements in the last [--] hours. ### Engagements: [---------] [#](/creator/youtube::UC9NW50adEt05VTenGlNANig/interactions)  - [--] Week [----------] +117% - [--] Month [----------] +96% - [--] Months [----------] +76% - [--] Year [-----------] -44% ### Mentions: [---] [#](/creator/youtube::UC9NW50adEt05VTenGlNANig/posts_active)  - [--] Week [--] +43% - [--] Month [---] +21% - [--] Months [---] +27% - [--] Year [---] +246% ### Followers: [-------] [#](/creator/youtube::UC9NW50adEt05VTenGlNANig/followers)  - [--] Week [-------] +0.56% - [--] Month [-------] +1.70% - [--] Months [-------] +8.80% - [--] Year [-------] +19% ### CreatorRank: [------] [#](/creator/youtube::UC9NW50adEt05VTenGlNANig/influencer_rank)  ### Social Influence **Social category influence** [finance](/list/finance) #297 [social networks](/list/social-networks) #3406 [technology brands](/list/technology-brands) #4082 [countries](/list/countries) [travel destinations](/list/travel-destinations) [automotive brands](/list/automotive-brands) [stocks](/list/stocks) **Social topic influence** [diy](/topic/diy) #278, [how to](/topic/how-to) #127, [copper](/topic/copper) #4, [howto](/topic/howto) #13, [tap](/topic/tap) #77, [back to](/topic/back-to), [pro](/topic/pro) #125, [youtube](/topic/youtube) #1696, [asmrsounds](/topic/asmrsounds), [tools](/topic/tools) #152 **Top accounts mentioned or mentioned by** [@mmplumbert8llf5m4ddh7r1](/creator/undefined) [@lhpsuppliescouk](/creator/undefined) [@rogerthepipeguy](/creator/undefined) **Top assets mentioned** [Flux (FLUX)](/topic/flux) [Flex Ltd. Ordinary Shares (FLEX)](/topic/$flex) ### Top Social Posts Top posts by engagements in the last [--] hours "How to join copper pipe with no movement #asmr #howto #diy #tools #plumbing #shorts #subscribe In todays ASMR Plumbing video Im joining copper pipe which has no movement on it so the only way to join with a fitting is to make a slip coupling. You can buy these fittings but I never had one so I used a file to file out the inside lip of a normal and feed join and this allows the fitting to slide up and down the pipework. You need to mark the pipe for the internal depth of each side of a fitting and then when you flux up the pipe and join you can slide the fitting all the way over one part of" [YouTube Link](https://youtube.com/watch?v=VTCxqVo6B9c) 2025-12-15T17:07Z 717K followers, 487.6K engagements "How to bend perfect pipe sets like a pro #asmr #plumbing #diy #tools #shorts #subscribe Welcome back to the channel in todays ASMR Plumbing video Im showing how to bend copper pipes perfectly like a pro. For this demonstration Im bending copper pipes from clip distance into a bathroom sink tap. Im using [--] angles using my monument pipe benders. First thing you wanna do is measure the distance you need to bend what I like to do is use some bits of copper and then measure either pipe centres or outside to inside. Theres a simple pipe bending formula which is written below: [--] degree x [--] 45" [YouTube Link](https://youtube.com/watch?v=_CA3tA1tCgI) 2026-02-07T17:00Z 717K followers, 2.3M engagements "My Best Plumbing Tools Welcome back to the channel on todays video. Im gonna show you all of my top asked about plumbing tools that Ive used in my videos. I get asked all the time. What to Im using and where you can get it from so hopefully this video will clear up some questions and you can find exactly where to get them from ______________________________________ Tools featured in this video: Techers pipe cleaners https://www.techersltd.com/store/p/copper-pipe-cleaner Derblaue foldable tub" [YouTube Link](https://youtube.com/watch?v=gU1HRbswjn8) 2026-01-01T17:00Z 717K followers, 42.4K engagements "Pipework shambles to copper master piece Welcome back to the channel on todays video a customer has called me out to fit a new limescale water filter. Theyve had a water softener in the past which is still plumbed up underneath the kitchen sink but I didnt get on with it. It caused many leaks took up a lot of of cupboard space and they always forgot to put salt in it so it wasnt doing a lot anyway. So Ive been called in to rip all the pipework out as a previous plumber who installed all this mustve arrived on a horse. Theres nothing clipped. The pipework is here there everywhere and theres no" [YouTube Link](https://youtube.com/watch?v=dzfSkxj4Oec) 2025-12-09T17:01Z 717K followers, 65.7K engagements "Fixing a leaking radiator valve like a pro Welcome back to the channel on todays asmr plumbing video I was sent from a customer to come and fix a leaking radiator valve. The valve looks like its been turned in place and the pipe has twisted and the customer put some tape and leak sealer over the top Theres it much water in this radiator as I put a drain hose on a radiator downstairs and its a pressurised system so it vents downwards Asoon as I crack the nut or open the air vent. Because the pipework is microbore 8mm I always cut the pipework and adapt to a soldered fitting instead of the" [YouTube Link](https://youtube.com/watch?v=uLiDF8FUXtU) 2026-01-28T17:01Z 717K followers, 532.8K engagements "How to connect MLCP pipe to isolation valve #asmr #plumbing #tools #diy #shorts #subscribe ASMR plumbing video showing how to adapt MLCP Viega smart press to fit into compression isolation valve How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr" [YouTube Link](https://youtube.com/watch?v=ArrwHnFAPVE) 2025-12-10T17:00Z 717K followers, 428.7K engagements "Fixing a leaking sink waste like a pro #howto #diy #plumbing #asmr #shorts #subscribe #tools Welcome back to the channel on todays asmr plumbing video I got called out to a leak on a sink waste when running water. When I removed the waste there was silicone but not in the right places I like to use the rubber on top and silicone under but sometimes it requires more on top too The waste pipe fittings needed removing as there was far too many fittings than needed. I changed the trap to a smaller and compact to give more room in the unit too How to DIY Plumbing ASMR ASMR sounds Foryou Best tools" [YouTube Link](https://youtube.com/watch?v=C8dAZIPPgtU) 2026-01-07T17:00Z 717K followers, 653.1K engagements "How to cut pipe lagging for a tee Welcome back to the channel in todays ASMR plumbing video Im showing how to cut pipe lagging insulation over copper pipe for a T piece. Im using the pipe lagger pro from Amazon to achieve this cut perfectly its adjustable so it fits all pipe sizes and has multiple cut points on the tool which allow you to cut straight [----] and even [----] for pulled bends. If you spend all your time getting your pipework super neat then why not cover it with insulation just as neat for the job to be perfect Ill leave a link down below where you can get them from and Ill see you" [YouTube Link](https://youtube.com/watch?v=DbZySPIuOq0) 2026-02-11T17:00Z 717K followers, 3.5M engagements "Press valves are so much easier to install #asmr #diy #plumbing #tools #shorts #subscribe In todays ASMR Plumbing video I was on a job and I needed to shut off the water with this isolation valve which requires a flat head screwdriver. When I tried to turn it off it wouldnt move so I decided to swap it out for a press viega valve instead. Because the pipework after the valve was swaged I wanted fresh pipe outside of the valve so I cut above it and below to get that section out. To clean the pipes up I used my drill pipe cleaners from Techersltd which make light work of cleaning copper pipe" [YouTube Link](https://youtube.com/watch?v=Huuq-XyH5bE) 2026-01-03T17:00Z 717K followers, 324.3K engagements "Radiator pipe bending and soldering #asmr #plumbing #diy #howto #subscribe #youtubeshorts #tools Asmr plumbing video on me connecting radiator copper pipework. Using a laser to keep everything straight a trowel for burn protection and a pipe bender to kick the pipe into place. Monument pipe bender huepar laser level ridgid pipe slice doing there job perfectly. Best plumbing tools used to get the job done Radiator pipework Bending copper pipe Soldering How to solder pipe Soldering copper pipe Copper pipe bending Connecting a radiator Plumbing a radiator Asmr Asmr plumbing Plumbers tools Tools" [YouTube Link](https://youtube.com/watch?v=P1ZFbRGyOxg) 2024-04-01T13:46Z 717K followers, 28.6M engagements "Using the best tools to hide a toilet flexible pipe #shorts #diy #plumbing #asmr #tools ##subscribe In todays ASMR Plumbing video I got sent out to a customers house because they have a toilet flexible pipe all on show to the side of their toilet and they wanted me to tidy it up for them. I started by removing the pipework as lowdown as possible and cleaning it up using my Techersltd pipe cleaner and peg to hold it still. This took the payoff really nicely and I was able to install an isolation valve low down out of the way as possible. Using some Yorkshire pipe fittings and some pipe I" [YouTube Link](https://youtube.com/watch?v=S4G7qwkRrOA) 2025-12-16T07:00Z 717K followers, 300.3K engagements "How to replace a faulty radiator valve like a pro #asmr #tools #diy #plumbing #shorts #subscribe In todays ASMR Plumbing video Ive been caught up to a customers house to replace the radiator valve as its not working properly so Im gonna show you how to change it. I first released a bit of pressure from the heating system and then because its a pressurised Heating circuit I can start to undo and drain from the radiator Im working on. This will continue to glug and drip a little bit of water but using my drain down water catching bucket from Derblaue. These foldable products are perfect inside" [YouTube Link](https://youtube.com/watch?v=WN86qGGv2Rc) 2026-02-05T17:01Z 717K followers, 119.2K engagements "Worlds first flow setting radiator valve #asmr #diy #plumbing #tools #plumber #shorts #subscribe In todays ASMR appointment video Im installing a brand-new radiator valve which has a flow setter on it so you can help balance a heating system especially if its big or being heavily extended. Water takes its easiest route and normally the radiators closest to the boiler get hottest and the ones further away can struggle. This also happens if you have radiators fed of the same pipe runs. These valves from Fre Power are like how you balance underfloor heating manifolds. I think this is a real cool" [YouTube Link](https://youtube.com/watch?v=Wv28CmChjnE) 2026-01-24T17:00Z 717K followers, 3.1M engagements "How to remove a stuck immersion heater #asmr #plumbing #tools #diy #shorts #subscribe Welcome back to the channel and todays video. I got caught up to a customers house because they needed some new water heater elements in the water tank. I started off by trying all the methods loosen it off with the tank full of water but that wouldnt budge and then I drained the tank and heated it up after removing the insulation and that didnt work so I had no option but to cut the elements out or fit a new tank. A new tank wouldve been a special order and a long wait especially over the Christmas period" [YouTube Link](https://youtube.com/watch?v=cUbDeSr3rQY) 2025-12-07T08:01Z 717K followers, 694K engagements "HOW To remove water from pipe for soldering #howto #diy #plumbing #youtubeshorts #asmr #subscribe Soldering sometimes can be tricky is water if left in the pipework. There are many ways to remove it for soldering old way was to use an old gs manometer how and suck it out or put the wetvac on it. Using a little sprayer and dropping the stem into the pipe as far as it can really helps get rid of the water which produces steam that causes the problem when soldering with water in the pipe How to remove water from pipe Soldering copper pipe How to solder copper pipe Remove water in pipe Steam in" [YouTube Link](https://youtube.com/watch?v=ouMe3NfbOcU) 2024-01-15T06:33Z 717K followers, 2.4M engagements "The BEST way to clean copper pipes howto #diy #asmr #plumbing #subscribe #shorts #tools #viral In todays asmr plumbing video Im showing how to clean copper pipes using the Techersltd pipe cleaners how to clean copper pipes clean copper pipe cleaning copper plumbing how to clean copper pipe before soldering clean copper pipe plumbing how to polish copper pipe remove oxidation from copper pipe clean copper pipe fittings how to clean copper pipes clean copper pipe cleaning copper plumbing how to clean copper pipe before soldering clean copper pipe plumbing how to polish copper pipe remove" [YouTube Link](https://youtube.com/watch?v=vGx4wZbvBts) 2025-12-29T17:01Z 717K followers, 1.9M engagements "The best way to get perfect insulation joints like a pro #asmr #howto #diy #tips #shorts #subscribe In todays ASMR Plumbing video Im showing how to cut insulation around copper pipes with perfect joints The toilet that Im using to achieve this is the pipe lagger pro. This is a fully adjustable pipe insulation cutting Jake which would do pretty much cover the whole range in pipe insulation sizes You can cut [--] joints even [--] joints as it has a [----] and also straight cut If youre going to spend the time making your pipework nice and neat then why not cover it up and finish a job to make it as" [YouTube Link](https://youtube.com/watch?v=N07l9WkFc74) 2026-01-01T07:33Z 717K followers, 1.2M engagements "How to fix a leaking rusty toilet Welcome back to the channel on todays video. I got called out to a customers house because they had a toilet that just takes too long to fill. I took the tank lid off and as you can see the fuel valve is just not letting any water through and when a customer needs to flush the toilet there is no water to be flushed. The problem with this in store is that the ceramic on the toilet and closes access to the nuts provided to be able to take that fill valve out so were gonna have to do is take the tank completely off the pan and change all the parts inside the" [YouTube Link](https://youtube.com/watch?v=OzjJs_wwXRQ) 2025-12-19T17:00Z 717K followers, 28.8K engagements "Fixing a leaking toilet with a new flapper #asmr #diy #plumbing #shorts #subscribe #tools In todays asmr video Im fixing a leaking toilet with a flapper inside. The washer on the inside is letting by so I was sent to replace. These flappers I think are a brilliant design its just the push buttons that look dated. There simple to replace and spares are easy to get and keep stock How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr How to DIY Plumbing ASMR ASMR" [YouTube Link](https://youtube.com/watch?v=W2zumh6tO0A) 2026-01-11T17:03Z 717K followers, 105.7K engagements "Customers Plumbing Problems Are Now FIXED Welcome back to the channel on todays video. Im in called out to a customers house because they have multiple plumbing issues that they want me to look at. They think that they have a leak underneath a kitchen sink taps on a basin that move when trying to shut off as there is a constant stream of water. The shower doesnt allow any water to come out of it whatsoever so were gonna be replacing that for a new shower and also there is only lukewarm water coming out of the bath taps. The leak underneath the kitchen sink was just mainly condensation as it" [YouTube Link](https://youtube.com/watch?v=vBYV6ivkDqI) 2026-01-02T17:01Z 717K followers, 23.2K engagements "Plumbing A Hot Water Outside Tap Tools featured in this video: Atlas46 Tool Chest Rig https://www.atlas46.com/online-store/Bennington-Tool-Chest-Panel-V3-p735326496 Check out this page from mmplumber https://www.amazon.co.uk/shop/mmplumberref_=cm_sw_r_apin_aipsfshop_YXH8AP8YWMWTT7T5KENB&language=en-US Main tool bag tools Veto tpxxl https://amzn.to/4kI5HPI Knipex cobra grips [---] https://amzn.to/3T8HHJP Knipex plier wrench [---] https://amzn.to/3SQNDY9 Wera jokers L https://amzn.to/4dEBbUI XL https://amzn.to/3HzjtG5 Xxl https://amzn.to/43paVdJ Radiator spigot https://amzn.to/3HiScrv Ridgid [--] in 1" [YouTube Link](https://youtube.com/watch?v=x-DJY6dwXs4) 2026-01-09T17:01Z 717K followers, 44K engagements "Teflon Tape vs Liquid Teflon #asmr #howto #diy #foryou #hack #subscribe #youtubeshorts #tools In this asmr plumbing video Im showing how to make in radiator valves using Teflon tape or liquid Teflon Here in the uk we have straight threads which require you to use at least [--] wraps to get a seal Thats why using liquid can make the joint look much neater on nicely finished fixtures Let me how in the comments which you use and why If you liked this asmr plumbing video then please give it a like comment below if you would do anything different and please subscribe if you are new See you on the" [YouTube Link](https://youtube.com/watch?v=218ZllZLC7o) 2024-10-06T17:30Z 710K followers, 5M engagements "How to replace a leaking isolating valve #asmr #diy #howto #plumbing #subscribe #youtubeshorts" [YouTube Link](https://youtube.com/watch?v=-Fd4cYcC0qM) 2024-02-18T07:24Z 717K followers, 4.3M engagements "How to plumb a discharge pipe like a pro #asmr #tools #howto #diy #plumbing #shorts #subscribe Welcome back to the channel on todays video I spotted this safety relief valve pipe sticking out the wall facing upwards. I have no idea why its facing upwards as insight. Theres two double beds so it mustve been done this way without spinning on the inside. I had to cut the fitting off as there is water left in the pipework. You cannot desolder pipes with water inside of them as it just creates steam so using the bandsaw from fein I can slice straight through drain the water and desolder. With the" [YouTube Link](https://youtube.com/watch?v=-HQ6oj7vInM) 2025-10-23T16:00Z 717K followers, 12.2M engagements "How To Plumb Up Bath Taps Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes" [YouTube Link](https://youtube.com/watch?v=209A05W0LIE) 2025-07-13T05:56Z 717K followers, 1.3M engagements "How to bend perfect [--] degree sets in copper pipe #asmr #diy #tools #plumbing #shorts #subscribe In todays ASMR Plumbing video Im showing how to bend a set in [--] mm copper pipe using a formula with [--] x [--] degree bends on the monument pipe bender. What you need to do is work out the distance between you want the two pipes centre to centre or inside to outside and then times that number by [---] . Put your first mark where you want to start the Ben to be which is on the corner of this piece of wood and then draw the second mark with that measurement. On the Monument benders I put the hook at" [YouTube Link](https://youtube.com/watch?v=2NTbHTqKUY8) 2025-12-27T17:00Z 717K followers, 296.9K engagements "I Found a Leak From Compression Fittings on Plastic Pipes Welcome back to the channel todays video Ive been caught out to a customers house because they got a leak coming through the ceiling as you can see there is just a bullet hole shaped hole which has been dripping so we need to find out what could be causing a leak Upstairs is a bathroom but everything has been tiled in with solid wooden floor with no signs of any of the bathroom fixtures leaking so what were gonna do is because there is a hole already. Im gonna fish a small camera up through the hole and hopefully we can see something" [YouTube Link](https://youtube.com/watch?v=3S1LdKZW-1w) 2026-01-16T17:00Z 717K followers, 47.2K engagements "The best tool for tighten nuts in tight spaces #howto #diy #tools #plumbing #shorts #asmr #foryou In todays video Ive been sent out to change a toilet fill valve but the access was really tight After installing the valve I had to push the toilet back and connect up the flex line. There was not a lot of space to get a spanner in or basin wrench so I used the handy hand spanner from www.techersltd.com These hand spanners have got me out of so much trouble lately and I dont know how I would have done it without them They come in [--] different sizes1/2 and 3/4 so there great for them hard to reach" [YouTube Link](https://youtube.com/watch?v=5hjVjlm-8h4) 2025-12-02T17:00Z 717K followers, 1.3M engagements "How to fix a leaking bath overflow #asmr #asmrsounds #tools #diy #plumbing #shorts #subscribe In todays ASMR Prime Video Im showing how to fix a leak on a bath overflow pipe that has fallen off. The best way and what I will be doing is to replace the bath waste for something with a better design as this doesnt have a O-ring keeping that flexible pipe attached but a simple way to stop it leaking so the customer can use the bath over the weekend was to add a bit of lsx sealant which is basically a silicon thats wras approved to use on plumbing fixtures. This is a quick simple things that can" [YouTube Link](https://youtube.com/watch?v=867kcMlbXLg) 2025-12-14T16:02Z 717K followers, 142.5K engagements "LOTS of soldering just to install a water filter Welcome back to the channel and todays video. Ive got called out to a customers house because they want a new water filter fitted. This would normally be a fairly simple in store as long as you have space as the units are quite big and we are going to be installing it on a [--] mm pipe which comes up out the floor via a main stopped tap and what I want to do here is in store a bypass so if the filter ever went wrong we could bypass it and still leave the property with mains water. As Plumbing is Plumbing the leave valve above didnt want to shut" [YouTube Link](https://youtube.com/watch?v=91Zt71L0WJI) 2025-12-23T17:00Z 717K followers, 29K engagements "Plumbing new pipes for a dishwasher Welcome back to the channel on todays video. Ive been called up to a customers house because they want a new dishwasher fitted. The only problem is is that theres no Plumbing in the space where they want it and theyve only plumbed up for a single appliance underneath the kitchen sink So what youre gonna see me do in a video is adapt the plumbing underneath the kitchen sink to take two inlet hoses to the washing machine and the dishwasher and Im going to install a new trap to take both discharges and we have to run the discharge for the new dishwasher under" [YouTube Link](https://youtube.com/watch?v=EC2WytI9XBE) 2025-12-26T17:00Z 717K followers, 30K engagements "How to remove a radiator like a pro #asmr #howto #diy #foryou #shorts #subscribe #tools #plumbing In this asmr Plumbing video and showing how to remove a radiator like a pro Do you wanna start by isolating the valves and open up the air vent and make sure theres no water coming out That will tell you that the valves are holding . Once youre happy that the valves are holding you want to put a bucket or a container underneath the valves ready to catch the water in this video Im using derblaue system which has a folding bucket and a funnel which allows me to wrap it around the pipe and that will" [YouTube Link](https://youtube.com/watch?v=Ezf38COnnSs) 2025-01-28T17:00Z 717K followers, 7.2M engagements "Bending copper pipe over a pipe into press #asmr #subscribe #diy #howto #plumbing #bending #copper Asmr plumbing clip of me showing how I bend copper pipe over a pipe using a pipe bender. Im using the monument pipe bender as its so much better than the traditional ones as you can line everything up with the arms. This allows you to line everything easier getting the bends straighter. The benders are nice and compact and you dont need a former as its built into the bender. Hope you enjoy the clip and get practicing Asmr Plumbing asmr Pipe bending How to bend copper pipe copper pipe bending" [YouTube Link](https://youtube.com/watch?v=FAu2uUG-U_c) 2024-05-01T16:00Z 717K followers, 1.3M engagements "How to fix a leaking radiator valve #howto #diy #plumbing #asmr #asmrsounds #shorts #subscribe Welcome back to the channel on todays video record to a customers house because they have a leak from a radiator pipe. This pipe is [--] mm thick and its crushed inside the valve because the pipe is too soft and the connection has been over tightened. To repair this leak in the best way possible Ive changed the valve to a [--] mm size and then cut the pipe and sold it a [--] mm to [--] mm long tailed Yorkshire reducer. This is the best way to connect tiny pipes as when youre connecting and tightening the" [YouTube Link](https://youtube.com/watch?v=HiY4lt_b_1I) 2025-10-16T06:00Z 717K followers, 377.3K engagements "Smelly sink trap fix #asmr #asmrsounds #diy #plumbing #tools #shorts #subscribe #hack" [YouTube Link](https://youtube.com/watch?v=IZZJI_WeOhA) 2025-12-13T16:59Z 717K followers, 215.2K engagements "While youre here can you fix my leaking toilet #asmr #diy #plumbing #fix #shorts #subscribe #tools Welcome back to the channel and todays video I got asked by a customer while youre here. Can you fix a leak on my toilet No I didnt have the part on my van as I wasnt sent there to fix it so I did the next best thing and that was to apply some sealant where the connection from the connector is to the pipe. If I was sent to fix this leak I would normally bring a spare connector with a brand-new seal but if the customer wants me to look at it on the spot then I will fix it on the spot How to DIY" [YouTube Link](https://youtube.com/watch?v=JQZIc_5vw_g) 2025-12-11T17:10Z 717K followers, 133.9K engagements "The correct way to connect a flexi to isolation valve How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr" [YouTube Link](https://youtube.com/watch?v=LYJFruIXSMI) 2025-12-28T17:00Z 717K followers, 1.2M engagements "How to change a toilet isolation and fill valve like a pro #asmr #diy #plumbing #shorts #subscribe Welcome back to the channel in todays ASMR Plumbing video. Ive been caught out to a customers house because the toilet fill valve isnt working and they want it replaced and the isolation valve feeding the toilet doesnt shut off properly. After loosening the isolation valve and removing the nut and olive with my cutter I can put a new isolation valve which has full flow and a handle so the customer can turn off themselves without using a tool to fill valve is replaced with a brass shank style so" [YouTube Link](https://youtube.com/watch?v=M980yOo_588) 2025-12-20T17:00Z 717K followers, 139.6K engagements "How to fix a radiator not getting hot Check the valve and give it a tap #plumbing #diy #howto" [YouTube Link](https://youtube.com/watch?v=NoEnHZ8OyCM) 2023-10-30T14:13Z 717K followers, 424.2K engagements "Every Plumber Needs These Spanners Welcome back to the channel on todays video. Ive got a brand-new product to show you from Heatlab and myself. Ive helped design the spanners in collaboration with a company called heatlab they make lots of core plumbing tools and was a perfect fit to be able to get these types of spanners made. In the pack is two spanners we have a [--] mm for [--] mm compression fittings and also a [--] mm for [--] mm pipe fittings . The reason why Ive decided to go with two separate sizes is that these are the most common sizes that you find in a domestic industry. Its [--] times" [YouTube Link](https://youtube.com/watch?v=OckHKbFyHSk) 2025-12-16T17:00Z 717K followers, 29.7K engagements "These Pipe Clips Make Your Life EASY Welcome back to the channel todays video is all about ecoclips. These are the best clips available I think especially for engineers theyre made from recyclable plastic which is obviously good for the environment. They come in two colours white and black and also sizes of 28mm 22mm and 15mm. You can buy them in separate boxes so a whole box of each size and you can also buy a whole box of the rail clipping system which allows you to clip the clips into place in bands of four or you can simply snap off the ones that you dont need And either use them singly" [YouTube Link](https://youtube.com/watch?v=QuBta0aY7s8) 2026-01-13T17:00Z 717K followers, 11.8K engagements "How to replace a bathroom sink waste #asmr #subscribe #diy #youtubeshorts #howto #plumbing #tools Asmr plumbing video replacing a bathroom sink waste. The mechanism has gone so it was swapped to a clicker waste. The old waste was made in with so much silicone it took a while to get the nut down the threads Cutting the silicone out using the toughbuilt scraper which makes a perfect plumbing tool for cleaning silicone and scraping the old off After cleaning the new waste went in with a basin mait washer system under which uses a huge rubber washer These work great and its very clean and does" [YouTube Link](https://youtube.com/watch?v=V2mHyXai6u8) 2024-04-29T16:00Z 717K followers, 3.3M engagements "Changing a sink tap using the best tools #asmr #tools #diy #plumbing #shorts #subscribe #plumber Changing a bathroom sink tap using a hand spanner from Techersltd a t handle ratchet from Wera and some parts from Nerrad tapped kit connected with a Deen square drive to hex Atlas46 tool roll www.atlas46.com Techersltd hand spanner https://www.techersltd.com/store/p/flexi-hose-tap-tightening-spanners Wera t handle ratchet: https://amzn.to/4qDPaPO Nerrad tappex kit https://amzn.to/453spN2 How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber" [YouTube Link](https://youtube.com/watch?v=Wp0Aoh_kEsE) 2026-01-10T07:37Z 717K followers, 214.8K engagements "Plumbing one of the rarest outside taps #asmr #admrsounds #plumbing #shorts #subscribe #tools Welcome back to the channel on todays video Im gonna be installing one of the worlds most expensive and rarest outside taps but you can get on the market. This outside garden tap must be some sort of collaboration with Mickey Mouse and Im going to be installing it at my Nans house who is a big Disney fan and as soon as I saw that this was available I had to buy it for her for her garden Never gonna have to alter the back plate that it fixes to as this tap is from America and is a three-quarter thread" [YouTube Link](https://youtube.com/watch?v=YYu1GiOSe4w) 2025-12-05T17:01Z 717K followers, 13.2M engagements "These fittings are easily mistaken for press In todays ASMR Plumbing video Im showing a copper fitting which often gets mistaken by a press copper fitting with rubber earrings on the inside and the fittings that I use have sold a preloaded they are called Yorkshire solder ring fittings How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing" [YouTube Link](https://youtube.com/watch?v=Z3znBfrSu5c) 2026-01-18T16:58Z 717K followers, 795.1K engagements "Upgrading a flexi pipe to hard chrome pipe #howto #diy #craft #shorts #subscribe #asmr #tools Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes" [YouTube Link](https://youtube.com/watch?v=a6Nna-pOtqs) 2025-06-14T13:00Z 717K followers, 18M engagements "How to press copper pipe in tight angles #asmr #subscribe #howto #diy #youtubeshorts #asmrsounds In this asmr plumbing video I am using pressfit on this job but I cant fit the jaws on the fitting as its tight for space Thankfully novopress make some angled jaws for the gun to help get into tight areas. This is due to having full [---] degrees on the jaws as well being able to spin the collar to your desired position. Im really glad innovation has come to the plumbing industry to help us out on the job site. For such long time plumbing has been hard work but now the new tech is making it more" [YouTube Link](https://youtube.com/watch?v=a_n3IsL-YFk) 2024-05-26T16:00Z 717K followers, 8.1M engagements "How to silicone a toilet like a pro #asmr #subscribe #diy #youtubeshorts #howto #plumbing #tools Plumbing asmr video clip on me siliconing the bottom of the toilet We do this to help finish the toilet ceramics to the floor for a clean look and it helps stick the toilet to the floor in position Im using xpro bathroom sealant in this clip and using the Cramer silicone profile tools it makes light work getting that crisp benched finish. The solution in the bottle sprayer is a drop of fairy washing up liquid and water. The more practice you have the better you get and the least product you will" [YouTube Link](https://youtube.com/watch?v=aflxnnuK-8A) 2024-04-30T16:00Z 717K followers, 507.2K engagements "Professional Plumbing Tool Bag Every Tool I Use Every Day In this video I show all the tools I carry every day in my plumbing tool bag and explain why each one earns its place. This is my real working setup that I use on domestic and commercial plumbing jobs across the UK. From hand tools and adjustable spanners to pipe cutters grips and everyday essentials this video gives you a full walkthrough of a professional plumbers tool bag. Whether youre a qualified plumber an apprentice or just interested in trade tools this video gives a clear look at whats actually used on the job. I talk through" [YouTube Link](https://youtube.com/watch?v=d7UOOfIFpec) 2026-01-04T21:01Z 717K followers, 20.3K engagements "How to change a outside tap LIVE #subscribe #copperpipe #diy #plumbingpipes #plumbing" [YouTube Link](https://youtube.com/watch?v=eWZvpt2YZcg) 2023-06-22T17:50Z 717K followers, 38.4K engagements "How to bend copper pipe in place #asmr #howto #diy #foryou #tools #shorts #subscribe #hack #plumber In this ASMR Plumbing video Im showing how to bend copper pipe in place using the Monument benders. This ASMR Plumbing hack is really good if youve got pipework dropping vertical or even horizontal and you want to bend it without using an extra fitting. The Monument benders sit flat against the wall which allows you to be able to bend in place very easily and very accurately. When bending copper pipe all you need to do is learn all the tricks and tips while using your bender. This will make you" [YouTube Link](https://youtube.com/watch?v=isoC-BeWbdk) 2024-12-04T17:00Z 717K followers, 9.9M engagements "How to change a radiator valve #asmr #howto #diy #foryou #subscribe #shorts #tools #asmrsounds In this ASMR Plumbing video Ive been called out to a leaking radiator valve which has to be replaced so obviously start off by isolating the system and then youre free to open up the nuts and olives to release the water. Just make sure that you catch it in a bucket. Obviously I like to use my buckets from Derblaue this bucket its perfect height to fit underneath radiators allowing me to catch all the water I needed and still giving me plenty of room to get on with the job Thermostat radiator valves" [YouTube Link](https://youtube.com/watch?v=kyKYfb_1F1Q) 2025-01-09T17:00Z 717K followers, 540.6K engagements "Wera Joker Spanners Which size fits what These are the Wera joker spanners and Im gonna show you exactly which sizes I carry and what are use them for. The Spanish youve seen me using all my videos they are a self setting and also a ratchet spanner. The main reason why I really like him is that I hate adjustable spanners because you were just to the correct measurement of your nut and when you put it on and pull it back off again its already moved as theres too much play and slop in the mechanism I understand that they compact and really good because you can Adjust to different sizes but for" [YouTube Link](https://youtube.com/watch?v=m5rmLjqQvNc) 2025-05-27T16:01Z 717K followers, 41.9K engagements "Bending copper pipe to replace a toilet flexible hose #asmr #shorts #diy #plumber #subscribe #tools In todays ASMR Plumbing video Im showing how to replace a toilet flexible hose with copper pipe. after removing the old flexible line they installed a new isolation valve for the customer to be able to turn off the water if they needed to and to get from that to the old valve I need to bend a piece of copper pipe. Using the Monument pipe benders I start off by bending two small sets as that can get me close together and then continue to bend each side to the desired length I find is one of the" [YouTube Link](https://youtube.com/watch?v=n_qOx0L6pyE) 2025-12-26T07:17Z 717K followers, 456.2K engagements "How to mark cut and solder a radiator valve #asmr #diy #plumbing #olumber #tools #shorts #subscribe In todays asmr plumbing video Im showing my process to plumbing a radiator valve onto copper pipes coming out a wall. Im using a huepar laser to get the measurements perfect where it needs to cut. To solder the pipe and fittings a good clean is necessary for the perfect soldered joint. Flux is then added followed by the fitting which is a Yorkshire soldered fitting with solder pre loaded into the raised ridge. I always dab a bit of solder to help the fitting flow as you saw as soon as I added" [YouTube Link](https://youtube.com/watch?v=obOK_t053S8) 2025-12-22T17:01Z 717K followers, 97.1K engagements "New builds most common leak Welcome back to the channel and todays video. Ive been called out to a customers house because they have a leak coming from the Bath every single time that they have a shower. This house is a new build and I do come to these jobs more frequently. The new builds seem to be thrown up super fast and the attention to detail which should be basic is lacking and after a few years things decide to give up the ghost. I start by spraying down the areas with the shower and nine times out of [--] leaks on baths is to do with the sealant for some reason they always seem to have" [YouTube Link](https://youtube.com/watch?v=oy2zUvHTgos) 2025-12-30T17:01Z 717K followers, 52.2K engagements "How to bend copper pipe #plumbing #subscribe #diy #youtubeshorts" [YouTube Link](https://youtube.com/watch?v=q5fgOpFwXRk) 2023-08-13T12:16Z 717K followers, 316.6K engagements "Milwaukee rapter pipe cutter 15-28mm #asmr #subscribe #diy #howto #youtubeshorts #tools #asmrsounds Cutting 28mm copper can be hard and slow but using the Milwaukee raptor pipe cutter makes light work of 15mm pipe to 28mm. The raptor uses m12 batteries so its nice and light with a very comfortable feel one handed. The raptor has a led light and sight gauge so you can see your marks on the pipe before you push the trigger How to cut copper pipe Milwaukee rapter Milwaukee m12 pipe cutter Automatic pipe cutter Copper pipe cutter Cutting copper pipework How to cut copper pipework Milwaukee rapter" [YouTube Link](https://youtube.com/watch?v=tWEFSYKQMJo) 2024-06-06T16:00Z 717K followers, 2.8M engagements "How to extend radiator valve tails Pipework too short #howto #diy #asmr #subscribe #youtubeshorts In this asmr plumbing video I am extending radiator valve tails as the first fix pipework is not coming out the wall in the right place The one right hand side is already connected using the lock shield valve with drain as this isnt extendable. So with this side fixed and connected Im extending the thermostat side as I can fit a longer tail to make up the distance. This saves time and money moving the pipe in the wall to the correct place and still looks good with not too much being extended." [YouTube Link](https://youtube.com/watch?v=u8FLBdhQmKQ) 2024-08-25T06:00Z 717K followers, 6.8M engagements "Using the best tools to replace a tap and alter pipes Welcome back to the channel on todays video. I got caught out to a customers house to swap out their kitchen sink up and to be able to swap it. Some pipework alterations have to be done so Ive used the best tools available to change the tap and alter the Plumbing. Ive recently got a new tool which is the bigidesign bit bar [--] which is a very cool bit holder that you can use the bits in the end as a screwdriver I love the titanium tools so it was good to show it off. Changing a tap is super easy using specific tools especially the Nerrad" [YouTube Link](https://youtube.com/watch?v=3KlJBbTypWs) 2026-01-14T17:00Z 717K followers, 259.1K engagements "How to make a diy copper tap #asmr #howto #diy #plumbing #subscribe #shorts #tools #foryou In this ASMR Plumbing video Im showing how to make your own DIY custom tap made out of copper and fittings. Customer request requested for me to make my own copper tap and I decided to use some press fittings as I think these look a bit more steampunk as they are a little bit bigger and chunky rather than the small solder fittings. I started off in certain some stem pipes which are mainly used for wall plates on outside taps as they have a female thread with a solid piece of copper pipe attached to" [YouTube Link](https://youtube.com/watch?v=vafgwMY1s_g) 2025-05-10T06:00Z 717K followers, 2.1M engagements "Turning a pipework shamble into a copper masterpiece Welcome back to the channel in todays video. Ive got caught out to a customers house to replace their radiator with a towel rail. This is normally a good choice as normal radiators tend to rust in high moisture rooms such as a bathroom. The pipework is currently fed in [--] mm and it comes from underneath the shower tray which is going to be a bit of a pickle to adapt as I like to always re-pipe in copper but I plan to cut the pipes underneath and rejoin them and bring new pipes along the top of the skirting and bend into our new towel rail." [YouTube Link](https://youtube.com/watch?v=ywSZ4wZvJJA) 2026-02-13T17:01Z 717K followers, 20.6K engagements "How to fix a stuck bath waste #asmr #plumbing #diy #tools #shorts #subscribe #howto #plumber In todays ASMR Plumbing video I got caught out to a customers house because their Bath waste was stuck shut. These waste kits are a nightmare and theyre overflow connection is terrible so Ive decided to redo the whole kit and these come with a nice big rubber so I dont have to worry about trying to silicon them in. The easiest way to get the old ones out is to hold a nut with a para grips and using a screwdriver get through into the grooves and slots from above and twist it. After fitting a new waist" [YouTube Link](https://youtube.com/watch?v=-tWdcXfXXGc) 2025-12-31T08:12Z 717K followers, 106.3K engagements "How to plumb up a Kitchen sink waste #asmr #diy #howto #plumbing #kitchen #subscribe #youtubeshorts How to plumb up a kitchen sink asmr plumbing I made all my kitchen sink wastes in with plumbers mait as its clean fast and no wastage. Pitching the waste pipes with the Milwaukee hackzall and using the deburrer tool from monument for that perfect finish. This macalpine waste kit is so easy to fit and worked out perfectly for me with no additional waste fittings How to plumb a kitchen Kitchen plumbing Kitchen sink plumbing Asmr Asmr plumbing Plumbing asmr How to plumb a kitchen sink unit Waste" [YouTube Link](https://youtube.com/watch?v=1MlNqTMIaMQ) 2024-03-16T12:10Z 717K followers, 5.2M engagements "This plumbing is terrible Welcome back to the channel on todays video. Ive been called out to a customers house who has some plumbing issues that theyre worried about. We have a waste pipe which is attached to flexible connections and its pulled to the trap down lower so thats ready to pop off and those flexible connections have allowed it to drop. The plumbing of the hot and cold to the taps inside the sink unit look like its been done by a complete DIY or landlord to me as the joints are covered in PTFE type there is so many different joints copper brass and plastic and we have some valves" [YouTube Link](https://youtube.com/watch?v=1u673luQ30g) 2025-09-05T16:00Z 717K followers, 159.6K engagements "How to fit a bypass valve on pipework #asmr #diy #howto #plumbing #plumber #youtubeshorts Asmr video of Fitting a bypass valve on some heating pipework. This is fitted so if the zone valves close the pump and still circulate around the system to prevent damage. I used a clever coupler union fitting to replace nuts and olives so I can slide the valve back out if needed to in future. All soldered fitting and will last a very long time. Looks nice all shined up as well. Thanks for watching Asmr plumbing Asmr tools How to fit a bypass Bypass fitting Soldering pipe Soldering fittings Fit pipework" [YouTube Link](https://youtube.com/watch?v=3zs0MFvv76Q) 2024-02-17T07:23Z 717K followers, 732.3K engagements "Plumbing hack everyone should know Welcome back to the channel on todays video we got two taps to sort out one is constantly running and the other ones flexible hoses look like theyre about to burst. Im also gonna show you the best Plumbing hack that every plumber should know and that is installing your taps with the hardware already attached which can save you some FAF and hassle of losing the hardware down the back of the units and this trick can be used on kitchen taps and also some basins. The tools that I use to fit my tabs are from Nerrad this is the tappex kit what I really like about" [YouTube Link](https://youtube.com/watch?v=8fjNMiaOAGU) 2025-08-22T16:00Z 717K followers, 210.8K engagements "Fixing lots of plumbing jobs Welcome back to the channel on todays video. Ive got a few jobs that I need to sort out so I thought I would put them all into one video. I work every day as a maintenance job and plumber so I find myself going from job to job which normally between one and two hours max I work pretty close to where I live so Im in a tight little area and Im just trying to help the local communities out with the Plumbing problems. I find this way of work works for me and I can make almost the same amount or even more money as people fit in boilers with a lot less stress. So in" [YouTube Link](https://youtube.com/watch?v=FeZY_1PUays) 2025-11-28T17:00Z 717K followers, 34.6K engagements "How to install a kitchen tap from the top #plumbing #diy #subscribe" [YouTube Link](https://youtube.com/watch?v=Jh2zEHoGzp0) 2023-08-11T16:12Z 717K followers, 534.6K engagements "King Of Spanners Wera joker XXL #howto #diy #plumbing #asmr #subscribe #youtubeshorts #plumber New to me the joker spanners Ive been using over the last week and I have to say I have been loving them Self setting spanners that lock onto the nuts and allow a slip action replicating a watching effect. The wera joker spanners I use are the XL version which is 19-24mm for 15mm nuts. And the XXL big daddy which does both [--] and 22mm compression nuts Really really nice using tools from wera King of spanners New spanner Wera joker Wera joker spanner Wera ratcheting spanner Ratcheting spanner" [YouTube Link](https://youtube.com/watch?v=K8zJ-22A9FY) 2024-02-05T06:35Z 717K followers, 2.4M engagements "Burst flexible hose Changing a valve LIVE Welcome on todays video I got called out to a pub because they had a flood caused by a burst flexible hose. These hoses have a rubber internals with a braid on the outside protecting it but once that becomes rusted they can fry and puncture on the inside which has caused this to rupture and flood The plan of attack is to change the isolator to one that I normally use which is like a butterfly handled leave a valve. This is much better than whats been installed as somebody before has installed a service valve with a flexible house connecting it. A" [YouTube Link](https://youtube.com/watch?v=NupyteCOAWs) 2025-12-12T17:00Z 717K followers, 41.2K engagements "Huepar China Tool Trip Vlog Welcome back to the channel todays video something a little bit different where Ive flogged my trip to China and Hong Kong with the company huepar. The company brought a few of us out to check out their HQ their company and also experience some Chinese culture. We spent four days in China and then we moved to Hong Kong for two days and got to have a little look round and see what we could find. Ive tried to make this video more Plumbing related so you might see some clips with toilet and pipes as well as inside the factory and experiencing some Chinese locations." [YouTube Link](https://youtube.com/watch?v=RB8mwP32j84) 2026-01-10T16:00Z 717K followers, 10.7K engagements "Changing a tap in tight space #asmr #diy #plumbing #plumber #shorts #subscribe #tools asmrsounds In todays ASMR Plumbing video I got caught out to a customers house because they wanted a new kitchen sink tap space underneath isnt great as theres pipes everywhere at all different heights and there is only a specific place where I could cut some new isolation valves to be able to shut off the tap easily To remove the tap are used some various to parts of tools to make up my setups we have parts from the Nerrad tap X kit a ratchet driver from Deen which turns on the handle too aswell as" [YouTube Link](https://youtube.com/watch?v=Y-1HyZN4AdM) 2025-12-21T07:30Z 717K followers, 74.7K engagements "How to plumb a new sink waste #howto #diy #asmr #subscribe #shorts #tips #foryou #plumbing #tools In this ASMR Plumbing video Im showing how to install and fit a new basin waste. The rubbers and seals that come with the basin I dont think are sufficient for the job sometimes the casting and the mouldings of a basin dont allow the way to sit nicely especially on the top which is why I normally use silicone or putty if the washer is no good. For the end side there is a big gap left all the way around the outside of the waist. I like to fill this gap up using more silicon as this is actually a" [YouTube Link](https://youtube.com/watch?v=ZNUQahLhVFo) 2025-03-03T07:00Z 717K followers, 9.2M engagements "Testing thread sealer for plumbing valves which do you use #diy #plumbing #howto #diy #subscribe" [YouTube Link](https://youtube.com/watch?v=b5BR-EmcJCM) 2023-10-16T19:32Z 717K followers, 1.2M engagements "Cold Radiator But Pipes Are Hot Fix It FAST In todays video Ive been caught up to a customers house because their radiator isnt working. All the other radiators are hot and the heating is on and the pipework gets hot but it doesnt flow through the radiator. So in this video Im gonna show you a simple tip how to get the radiator working and Ill be proving it to you using a thermal imaging camera . Nine times out of [--] the problem is the thermostat and as you can see on the camera the pipework is hot up to the valves but its not flowing through. The first thing to check is the pin underneath" [YouTube Link](https://youtube.com/watch?v=ixgg_3vr-WE) 2026-01-06T17:24Z 717K followers, 10.3K engagements "The best plumbing hack with taps #asmr #hack #howto #diy #learn #subscribe #youtubeshorts The best kitchen sink hack is the fit the hardware first to the tap and using the horse shoe type you can slide it into the sink in place to avoid looking the hardware if tight place to get to Have we been fitting taps wrong for all this time without realising why they was shaped this way This works on all stainless and thin basin ceramic sinks. Try this plumbing hack next time when installing a tap on your next job Dont forget to like subscribe and comment below if you knew you could do this Kitchen" [YouTube Link](https://youtube.com/watch?v=m3NAgJvcmL8) 2024-08-06T05:40Z 717K followers, 78.1M engagements "How to install a shower valve from the room behind #howto #diy #plumbing #asmr #subscribe #plumber" [YouTube Link](https://youtube.com/watch?v=nTuGzv8TJnY) 2024-01-19T06:32Z 717K followers, 22.6M engagements "How to bend copper pipe Full cross over #copper #plumbing #subscribe Little quick video on how to bend a full cross over in 15mm pipe fast and effectively with no measuring. Remember less is more here Monument 15mm benders used here with copper pipe from Lawton tubes. Asmr Plumbing Tool bag Pipes Tools Hand tools DIY How to Copper Soldering Press tool Asmr Plumbing Tool bag Pipes Tools Hand tools DIY How to Copper Soldering Press tool" [YouTube Link](https://youtube.com/watch?v=tOUedj6nCm4) 2023-05-18T20:40Z 717K followers, 46.8K engagements "The only screwdriver you will need #subscribe #wera #screwdriver #tools #youtubeshorts" [YouTube Link](https://youtube.com/watch?v=txfRow6uOAg) 2023-06-23T18:06Z 717K followers, 118.2K engagements "Using every plumbing skill on one job In this job Im first fixing a shower valve for [--] jets a hand held sprayer and a fixed head Thats [--] outlets on a shower This install was done in full copper with brass valve and using every plumbing skill in one Job Soldering the backplates pressing the copper fittings and pipe bending to the max [--] degree bends full cross bends to get the job done Sit back and watch me with some asmr plumbing sounds getting this job sorted. Let me know if you would have done anything different Soldering copper pipe Bending copper pipe Pipe bending Copper pipe Pressfit Pro" [YouTube Link](https://youtube.com/watch?v=yjITHLjZXHM) 2024-04-10T18:37Z 717K followers, 2.9M engagements "This Wera hallow nut driver is perfect for toilets #asmr #tools #diy #plumbing #subscribe #shorts Welcome back to the channel on todays ASMR Plumbing video. Im showing myself making up some toilet cistern tank bolts being made in. My go to method is to use the rubbers on the inside and in some packs you dont get a double rubber washer the coned ones are the best so what I like to do is fill the gap on the underside with silicon and that keeps the bolts from moving if the rubber reacts with the water or there is imperfections in the China casting. The bolts normally come with a [--] mm nut and" [YouTube Link](https://youtube.com/watch?v=zUsz6IqbFWM) 2025-12-17T17:01Z 717K followers, 887K engagements "The best way to connect flexible hoses to valves #asmr #asmrsounds #diy #howto #subscribe #tools Connecting up flexible hoses to valves has always been a talking point amongst tradesmen and diyers. The most seen way is to connect the flexible hoses straight to the valves. People think this okay and some get no leaks doing so. The flexible hose with rubber washer is designed to sit onto a flat face with as big of surface area as possible. The valves are bevelled which leaks a very small surface area to come contact with. some people use radiator tails they have spare lying about which is a" [YouTube Link](https://youtube.com/watch?v=4n7JxF-NHgY) 2024-08-01T16:00Z 713K followers, 265.2K engagements "Using my best tools to repipe a kitchen sink Welcome back to the channel in todays ASMR Plumbing video. Ive decided to post this video as a long format but in portrait as its fairly long and I didnt feel that speeding it up did it justice. This video is all about me replacing all the copper pipes inside a kitchen sink unit and replacing a kitchen sink tap thats been dripping installing a limescale Aquabion filter and tidying up all the pipework with new isolation valves. Im using a vast amount of tools which are the best in my opinion. We have press tools from Ridgid lasers from huepar press" [YouTube Link](https://youtube.com/watch?v=DwMlU2ra0fk) 2025-09-20T16:00Z 712K followers, 294.3K engagements "Ive not seen any plumber do this before Welcome back to the channel on todays video I got called out to a customers house who has a leaking filling loop isolation valve. Everytime they pressurise the heating the valve leaks out Upon inspection of the heating expansion vessel it feels full of water and seems very heavy. So in this video Im going to show you how to replace the vessel safely and easily as these can be ridiculously heavy and Ill be swapping out the factory combination section to fit my own isolation valves pressure relief and filling loop. With the cold water boiler and heating" [YouTube Link](https://youtube.com/watch?v=E8Kjw51hyjU) 2026-01-23T17:00Z 717K followers, 31.4K engagements "Where Is This Leak Coming From Welcome back to the channel in todays Plumbing video. Ive got called out to a customers house because they had a leak and a damp patch on their ceiling. Above this room is a bathroom so I gave it a good inspection to see if there was anything leaking on surface but there was no signs of anything here also this room doesnt quite lineup with the leak patch underneath so I looked in the room that was more in line with the damp patch and there was a boxing in the corner now even the carpet had some staining and was also damp as you can tell from the skirting board" [YouTube Link](https://youtube.com/watch?v=Hg_f0SNtjL4) 2026-01-30T17:00Z 717K followers, 25.8K engagements "I didnt expect this flux to be the best Welcome back to the channel on todays video were gonna be testing out which flux is the best for soldering copper pipe. We got four different types of flux to try out. We have the fluxuator with its pre-filled flux. Laco normally used for many years. power flux and also ever flux. Ive used three out of four of these products before I never used power flux which I know a lot of plumbers swear by. Ive got four bits of pipe with teas and some elbows in a configuration so we can solder some sockets on the verticals. They should give a fair test as the heat" [YouTube Link](https://youtube.com/watch?v=O_GOeZrtwSc) 2025-08-26T16:00Z 714K followers, 14.1K engagements "Fixing a leaking toilet with all new parts In todays ASMR Plumbing video I was called out to a customers house to fix their toilet toilets that was constantly running. Because this toilet had some cheap parts inside I decided to give it a whole makeover with installing a new Phil valve and a siphon. The toilet connector was a flexible house which didnt look too great so I decided to re-pipe it all in copper and that should give it the maximum life as possible. this toilet had an isolator already coming out the floor and I was happy to leave it in place as it wasnt leaking when I turned it" [YouTube Link](https://youtube.com/watch?v=dLJkAgyucvk) 2026-02-01T08:13Z 717K followers, 15.5K engagements "How to fix a dripping kitchen tap Welcome back to the channel on todays video. Im gonna show you how to fix a dripping kitchen sink tap. The noise coming from constant drips is enough to make you go crazy and fixing a leaking tap isnt as hard as you may think you do need to source the right part but that is generally the hardest part. The first thing you need to do is isolate the water going into the tap a quick test is obviously turning the taps on and making sure you have no more water coming out. With the water is isolated because this tap is a turn it uses ceramic cartridges on the inside" [YouTube Link](https://youtube.com/watch?v=emri-1VGUS0) 2026-01-20T17:01Z 717K followers, 29.8K engagements "How to fix a leaking radiator valve #howto #diy #asmr #asmrsounds #tools #shorts #subscribe foryou Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes" [YouTube Link](https://youtube.com/watch?v=hGmNOYIPGkY) 2025-08-06T05:51Z 713K followers, 70.5K engagements "How to change a pair of basin taps #asmr #howto #plumbing #subscribe #youtubeshorts #tools #plumber Asmr plumbing video on how to change a pair of basin taps. This is the old school way without cutting pipes or adding a flexi hose Simply shut off the water and open the taps downstairs or lower to drain the water out the pipe line. Remove the old tap and washer and fit new with plastic top hat washer. This spreads the load easier and tightens the tap firmer. Im using the todays tools tap kit which makes things super easy" [YouTube Link](https://youtube.com/watch?v=mMc51Ud4CtA) 2024-04-06T16:00Z 713K followers, 367.5K engagements "HOW To install a radiator valve on pipe #howto #diy #plumbing #subscribe #youtubeshorts #asmr Simple video showing how to fit a new valve and onto copper tails out of wall. Using a laser level from Huepar as I had it to mark [--] radiators in the room. So much easier if you havent used a laser level you must try it out It always comes out now. More than the normal level. Soldering copper pipe using lead free solder with laco fix 👌" [YouTube Link](https://youtube.com/watch?v=on03ljZo1ic) 2024-01-11T06:13Z 712K followers, 3.1M engagements "How to install a under sink tap filter #howto #diy #foryou #asmr #subscribe #shorts #tools #tips In todays ASMR Plumbing video is how to fit an under sink tap filter to make your water taste better. Ive got caught up to the job because the customer wanted a new filter fitted underneath their sink to make the water taste better and the unit Im fit in today is one from a company called water drop this water filter filters out chemicals and metals that can be absorbed in your water. The most common bad taste for water is chlorine and this filter also helps remove that. Micro plastics is a really" [YouTube Link](https://youtube.com/watch?v=pNLpJ5R9Npw) 2025-04-15T16:01Z 712K followers, 2.9M engagements "How to change a leaking radiator valve #asmr #howto #diy #plumbing #video #foryou #tools #tips In this ASMR Plumbing video Im showing how to fix a leaking radiator valve On this job I got called out because when the customer turns the radiator valve on and off it causes the valve to leak The first thing to do is to switch the boiler off and drain a little bit of pressure out of the heating system from a drain point which is normally from a radiator below. Whats the pressure has been dropped open up the radiator air vent to drain the water out of the system and the radiator your working on." [YouTube Link](https://youtube.com/watch?v=qAwj4zSYBgM) 2025-04-19T06:00Z 712K followers, 55.5K engagements "Perfect tool for radiators Vent plugs and radiator valves #howto #plumbing #diy #subscribe #asmr" [YouTube Link](https://youtube.com/watch?v=zDBu3OZjPoI) 2023-12-18T06:09Z 712K followers, 415.8K engagements "How to drain the radiator system with no drain #asmr #howto #shorts #subscribe #tips #diy #plumbing In this ASMR prime video Im showing how to drain your heating system down without a drain point. So normally on a radiators there is one with a set of valves with a drain point or one cut into the pipework. If you have external pipes on his heating system there was nothing even the boiler didnt have a drain point underneath and I needed to work on a radiator above. The easiest way youre doing so is to shut off the radiator valves that isolates the water flow going into it you can open up the" [YouTube Link](https://youtube.com/watch?v=4HQtDVl-Ras) 2025-03-04T07:10Z 715K followers, 285.7K engagements "How to install a vanity sink unit Welcome back to the channel and todays video. Ive got called out to a customers house because their bathroom sink was about to fall off the wall. After talking to the customer we decided that changing the sink for a volunteer unit would be beneficial as this is no longer requires to be fixed just on the wall it has support because its weight is on the floor. Vanity units are great options in bathrooms as youve got more storage and hopefully the Plumbing should be straightforward and come through the back of the unit exactly where we need it. Start by removing" [YouTube Link](https://youtube.com/watch?v=4ZsUyis-n4Y) 2026-02-06T17:00Z 717K followers, 21.9K engagements "Why I choose this pipe bender Welcome back to the channel on todays video were gonna be talking all about my favourite pipe bender from Monument tools. Despite youve seen a lot in all my videos and I thought in this video I would explain exactly the reason why. they make two separate sizes in this pipe bender one is [--] mm and the other is [--]. If you live outside the UK then these benders might not fit your pipe size as you could have measurements in inches when this one is designed and made in the UK for our pipe sizes in millimetres . what I really like about this bender is that the [--] mm" [YouTube Link](https://youtube.com/watch?v=CVCfwKFNK8Y) 2025-10-15T16:07Z 715K followers, [----] engagements "Plastic push fit fitting blew off pipe #asmr #diy #plumbing #fix #shorts #subscribe #foryou #tools In todays ASMR Plumbing video I got called out to a customers house because they had a leak and I found that a pipe had just blew off out of a plastic push fit fitting The fittings that were used on the best quality so I decided to patch it back up using some of the best push fit fittings available in the UK which are from hep2o" [YouTube Link](https://youtube.com/watch?v=G5qBi0O7McI) 2026-01-08T17:00Z 717K followers, 82.7K engagements "The Ultimate Copper Pipe Bending #asmr #diy #howto #foryou #learn #subscribe #youtubeshorts #tools In this asmr plumbing video Im bending copper pipe into a full coil using the moment pipe benders which as you know are my favourite benders to use The job Im doing is replacing a flexi braided hose on a filling loop and replacing with a copper coil bent out of 15mm. This is really testing the strength and technicality of the monument pipe bender and copper pipe itself. Using some clever techniques and some practice Im able to pull a really tight loop consistently into a coil shape. Let me know" [YouTube Link](https://youtube.com/watch?v=MYVq5EKy2Bs) 2024-10-10T16:30Z 715K followers, 204.3K engagements "Installing a horse outside tap at a stables In todays asmr plumbing video I was asked to fit a new outside tap at a horse stables but this time to fit a tap in the form of a horse its self I really like these themed taps and trying to match the surroundings. I would have cut it out to make it look better but they drilled a really big hole to fit the plastic fitting in which I know I wouldnt get a fixing if I swapped it for a copper stem pipe and wall plate The amount of ptfe or Teflon wraps is normal in the uk as our threads are so loose As you saw even after 14-19 wraps it still flew in hand" [YouTube Link](https://youtube.com/watch?v=dNMeWb-1zVg) 2026-01-21T17:01Z 717K followers, 372.8K engagements "How to fix a hole in copper pipe #asmr #asmrsounds #howto #diy #shorts #subscribe #youtubeshorts In todays ASMR Plumbing video Im showing how to fix a hole in a copper pipe so if somebody has put a screw or accidentally drilled a copper pipe Im gonna show you another option instead of cutting it all the way through and putting a join in This fitting snapped over the top of the copper pipe so you need to make sure that it is cleaned appropriately and fluxed. The fitting is pre-loaded with soda as this is a Yorkshire type soldering fitting and all you need to do is heat up with a blow up and as" [YouTube Link](https://youtube.com/watch?v=iB9igYXI7UI) 2025-09-25T16:01Z 715K followers, 2.1M engagements "How to put a radiator back on the wall after decorating Welcome back to the channel on todays video. Im gonna show you how to fit a radiator back on the wall especially after decorating. So if youve already took the radiator off so you can paint and do any finishing or touch them up Work on the wall behind then obviously this is the video to show you how to put it back on again fill the heating system back up add some inhibitor and test for leaks. In a previous video which are linked down below I showed you how to remove the radiator so we should have valves that are in a opposition what you" [YouTube Link](https://youtube.com/watch?v=yTan1DnKkkI) 2026-01-27T17:01Z 717K followers, 12.7K engagements "Which Paste Is The Best Welcome back to the channel todays video is all about joining compound. You might see me use this in my videos especially on compression fittings as this lubricates the seal so it can mould to shape perfectly without any friction. It also adds a waterproof layer which can take up any imperfections on the pipe or even on the face of the valve or fitting youre connecting onto. The first compound is called lsx from fernox. This comes in a tube and has a consistency and look close to silicone. This dries in a rubbery substance which is fully waterproof and you can even use" [YouTube Link](https://youtube.com/watch?v=zXSWyIVMcps) 2026-02-03T17:01Z 717K followers, 11.7K engagements "Day in the life of a plumber Fixing leaks Welcome back to the channel on todays video we have a few jobs to sort out. The first job Ive been called out is a constantly overflowing toilet so as you can see the toilet is constantly running and that is because the ball valve isnt even attached so the customer has got pretty lucky here as it couldve been spraying and overflowing causing a flood. Because the toilet side go all the way back to the wall were gonna have to isolate the water. Pour the toilet out and try to gain access as I dont wanna pull it out too far and disturb too many joints." [YouTube Link](https://youtube.com/watch?v=-65RSZSigrk) 2025-07-18T16:00Z 706K followers, 48.6K engagements "How to remove and install new sink with silicone #asmr #howto #asmrsounds #tools #subscribe #shorts" [YouTube Link](https://youtube.com/watch?v=0zc02mqZeWQ) 2025-09-03T16:00Z 707K followers, 7M engagements "Plumbing up an electric shower like a pro #asmr #asmrsounds #howto #diy #plumbing #shorts #tools Welcome back to the channel in todays ASMR prime video. Ive been called out to a customers house to replace their electric shower. first thing first is to isolate the water and isolate. The electrics. Electrics is normally on the mains consumer unit and the cold water. I turned off the main stop tap feeding the house. But the supply feeds turned off I opened up some taps and started to de-wire and disconnect the plumbing connection onto the shower. Once disconnected we can remove it from the wall" [YouTube Link](https://youtube.com/watch?v=1ePbOlPLBNA) 2025-10-27T17:00Z 705K followers, 769.3K engagements "Why I use these copper fittings Welcome back to the channel on todays video I thought I would explain the reason why I pick these Yorkshire solder ring fittings over the traditional endfeed. These fittings are preloaded with soda inside the ridge. There is enough in this ridge to fully cover inside the fitting and the pipe although I do have a habit of dabbing a little bit more thats what I dont want to happen is that that so I can pull out and leave a void behind and also sometimes a little dab of soda helps it run properly. Yorkshire fittings are commonly misinterpreted for viega press" [YouTube Link](https://youtube.com/watch?v=1pMm7rXBBK4) 2025-10-28T17:00Z 678K followers, 14.1K engagements "The Best Pipe Bending Hack In this plumbing video Im showing how to bend copper pipe into a perfect set every time to a desired distance. In this video Im using the monument pipe benders which is my favourite as you know. The benders have some markers on them at [--] [--] [--] and [--]. To bend using the formula you have to work out your desired gap distance from center to center and times that number by [---] and you bend at that distance on both bends starting at the end of the arm at the [--] mark. Using this formula is a very good technique that can help you out on lots of occasions on the job. Its" [YouTube Link](https://youtube.com/watch?v=34gG8_O1eIw) 2024-10-22T17:33Z 700K followers, 50.5K engagements "How to stop a tap from dripping #asmr #asmrsounds #diy #plumbing #tools #shorts #subscribe #foryou In this video Im showing how to service a tap to stop it from dripping" [YouTube Link](https://youtube.com/watch?v=4eimKPrfRtk) 2025-11-19T17:00Z 688K followers, 94.9K engagements "This is My Press Setup Welcome back to the channel and todays video is all about press so what I wanted to do was explain exactly what I carry in my press back the fittings that I use and also my press gun that I choose to press with. The bag is from an American company called Atlas [--] which is the pipe vise bag. The reason why I really like this is that its flat and what I mean by that is that is a horizontal bag that opens up through the middle and its made of canvas which makes it extra light as you know some tool bags can be extremely heavy and these bags are extremely well-made but a" [YouTube Link](https://youtube.com/watch?v=4qJOPJ9i-t0) 2025-11-11T17:00Z 681K followers, [----] engagements "The best tool for fixing taps #howto #diy #asmrsounds #asmr foryou #shorts #subscribe #tools In this asmr plumbing video Im showing one of the best tool kits for changing and tightening up taps Some taps require you to get totally under the sink to be able to access the tightening but but using a kit like this Nerrad tapex extension kit allows you to do it without looking. Most plumbing jobs are done without looking as access is so bad and you have to rely on touch. I really like this kit as it keeps everything nicely organised and has really long sockets to deal with them long threaded bolts" [YouTube Link](https://youtube.com/watch?v=5t4UWgvvasI) 2025-01-04T17:00Z 701K followers, 75.9K engagements "Using tools to make my life easier changing a tap #asmr #diy #plumbing #tools #shorts #subscribe Welcome back to the channel on todays video. I got caught out to a customers house to replace their sink tap that was spraying them whenever it was turned on. The access for the tap was pretty tight but lucky to me Ive got my little hand spanners that can get into these tight spaces so after isolating the water feeds I can undo the tap flexible remove them and then using the Nerrad tappex kit long sockets and my Wera cyclops I can easily remove the old tap. With the old one out I managed to slide" [YouTube Link](https://youtube.com/watch?v=6dh3zRNqiQA) 2025-11-05T17:00Z 686K followers, 150.6K engagements "How to stop a tap from moving #asmr #asmrsounds #diy #plumbing #shorts #tools #subscribe #foryou Welcome back to todays video on this job. I got called out to a customers house because their tap was wobbling. The main cause of this was that the tap was stiff and each time they turned it off it loosened it more. I started off by isolating the feeds to the top and undoing the old one using my Nerrad tappex kit. This allows me to slide up over the pipework and locate onto the top connector and with that be in loose I can hold the plastic nut with one hand and turn the tap with the other. This" [YouTube Link](https://youtube.com/watch?v=6kJoUE7Mayw) 2025-11-17T17:00Z 688K followers, 112K engagements "How to remove old silicone and apply new #subscribe #youtubeshorts #plumbing #silicone Quick video showing removing silicone with ct1 multisolve spray cutting the old silicone out. Cleaning up and applying new bt1 silicone with more multisolve to help profile the silicone to tight sharp edges" [YouTube Link](https://youtube.com/watch?v=7RHVyFihmdE) 2023-05-29T14:49Z 688K followers, [----] engagements "Plumbing jobs with mmplumber ep19 Rads In this asmr plumbing video Im showing a few of the previous videos in longer form for you to enjoy them at slower pace In the video the jobs are all doing radiator work. The first [--] jobs are using MLCP pipe and press tool from Ridgid. I found this system extremely easy to use fast clean and efficient and the wavin Tigris I think is the future of plumbing works. The last video Ive swapped a radiator for a column style and had to adjust pipework under the floor. Im using brace brackets from monster plumb which help brace the pipework instead of using" [YouTube Link](https://youtube.com/watch?v=7VcqMLcRvWI) 2025-02-16T18:00Z 609K followers, 15.3K engagements "Simple job turns hard fitting a washing machine Welcome back to the channel on todays video. Ive been called out to a customers house to fit a new washing machine. The only thing is that upon inspection we are left with a few problems normally fit in a washing machine is super easy. So on this job the previous plumber before when they took the old appliance out theyve left the outlet pipe to the sink open ended and cut off to the bigger size because our new washing machine has a smaller outlet discharge hose were gonna have to adapt onto it. Normally the easy way of doing that is to change" [YouTube Link](https://youtube.com/watch?v=8JlD1UnOlFA) 2025-11-07T17:00Z 681K followers, 17K engagements "Vetopropac Wrencher Solder Bag #subscribe #youtubeshorts #veto" [YouTube Link](https://youtube.com/watch?v=9-5_-5gTZSE) 2023-03-27T21:01Z 678K followers, [----] engagements "Best plumbing HACK to fix a cold radiator #asmr #hack #asmrsounds #tools #diy #plumbing #shorts Welcome back to the channel on todays video. I was called out to a customers house because they have a cold radiator and Im gonna show you the best Plumbing hack to get it back hot again. Radiators typically have a thermostat on one side which is adjusted by a rotating head. This normally gets shut down during the summertime and then when you open it back up in the winter the pin and the washer get stuck on the inside so a nice easy way to free this up is by bouncing a hammer on the end of the pin" [YouTube Link](https://youtube.com/watch?v=9PZhjQ28k0Q) 2025-11-06T17:00Z 685K followers, 180.7K engagements "Worst plumbing job New sink tap hole in sink #asmr #diy #howto #plumbing #subscribe #youtubeshorts Ceramic sinks are a plumbers nightmare They normally come with a sticker for you to tap on but this sink had nothing Had to take an educated guess and using a hammer and screwdriver knock a hole through A diamond drill bit at 35mm normally works from the underside but I couldnt fit the drill in so I had to go to town on the sink. Old school style Enjoy" [YouTube Link](https://youtube.com/watch?v=9h_Yf9qgJWM) 2024-03-08T16:19Z 688K followers, 355.3K engagements "Fixing a fallen radiator back to the wall #asmr #diy #plumbing #shorts #asmr #tools #subscribe Welcome back to the channel on todays video. Ive got caught out to a customers house because their radiator fell off the wall Luckily this was a new build and pipework is made of plastic with fittings that do allow it to twist and turn as long as there is enough slack on the pipework. The wall plasterboard anchors gave away these with the pull fixings type. the board didnt seem too bad in other areas which is why I used some bull fixings in the slider parts and drilled new positions in the middle." [YouTube Link](https://youtube.com/watch?v=A1l3mT9EFAw) 2025-11-30T16:04Z 692K followers, 660.6K engagements "Plumbing jobs with mmplumber EP21" [YouTube Link](https://youtube.com/watch?v=A9Ttr_goPzI) 2025-08-21T17:05Z 694K followers, 245.1K engagements "Removing a radiator and prep for new #asmr #amsrsounds #howto #diy #plumbing #subscribe #shorts" [YouTube Link](https://youtube.com/watch?v=C2OPzlvT6KA) 2025-08-24T16:00Z 681K followers, 645.4K engagements "Plumbing jobs with mmplumber EP23" [YouTube Link](https://youtube.com/watch?v=CD7Z3lStopE) 2025-09-04T16:00Z 686K followers, 183.7K engagements "Fixing a leaking toilet through a tiny hole #asmr #diy #howto #plumbing #shorts #subscribe #tools" [YouTube Link](https://youtube.com/watch?v=CLEEwpdZOe8) 2025-10-05T06:00Z 706K followers, 671.9K engagements "How to fix an outside tap to the wall like a pro In this ASMR Plumbing video an existing outside tap was so flimsy to touch. I couldnt leave it how it was. Every time the customer turned and shut off the outside tap the tap itself and the pipework would wiggle in the wall. I started by cutting the old pipe off that was protruding through the wall and then cutting the pipework on the inside to be able to pull it completely out. Once the pipe is out of place and then installed an outside tap wall plate with a pipe attached this was wrapped in insulation tape to avoid contact with the concrete" [YouTube Link](https://youtube.com/watch?v=DE_FUXw_rIA) 2024-11-26T17:00Z 707K followers, 11.5M engagements "How to fix a leaking isolation valve #asmr #asmrsounds #diy #plumbing #shorts #subscribe #tools" [YouTube Link](https://youtube.com/watch?v=Ex_EEqpxs9w) 2025-11-22T07:14Z 693K followers, 102K engagements "Fixing basic plumbing jobs Welcome back to the channel today we got some odd jobs to sort out nice and easy just what I like as a maintenance plumber. I do a lot of work for an estate agent and on the letting side they just pump me loads of jobs to try and sort out for the landlord. The first job is a customer has called me in because they have a leak coming from their kitchen sink and upon inspection the joint between the waste and the stainless steel sink looks terrible and when tightening up the trap onto the waist it constantly jumps threads . So no messing about here time to install a" [YouTube Link](https://youtube.com/watch?v=F7MXGWX5fQw) 2025-03-15T18:00Z 706K followers, 84.1K engagements "How to remove a radiator for decorating Welcome back to the channel on todays video. Ive been caught out to a customers house because they want this radiator taken off so they can decorate behind it. Im gonna show you my way on how to remove this radiator safely and effectively. I know theres many tools that Im gonna be using in this video that you dont have access to but as long as you have something similar it will make your life easier. The first thing you wanna do when were removing radiators is make sure that your area is fully protected as the water could be black and it will stain" [YouTube Link](https://youtube.com/watch?v=HuTz_4c_ha8) 2025-10-17T16:00Z 681K followers, 186.1K engagements "How to solder without getting drips #howto #diy #tools #asmr #asmrsounds #shorts #subscribe #foryou" [YouTube Link](https://youtube.com/watch?v=HxRJfxSZxtw) 2025-10-19T07:19Z 674K followers, 58.4K engagements "How to pressure test plumbing using the Milwaukee M12 Inflator #subscribe #plumbing #milwaukee Quick video of me pressure testing the m12 inflator from Milwaukee tools The bits I use to make this rig up is Amazon - 1/8" BSP BSPT Schrader Tank Valve 25MM Wheel AIR Compressor [---] PSI [--] BAR BES - Part number [-----] Screwed S/Steel Reducing Socket - 1/2" 1/4" BSP BES - Part number [----] End Feed Male Adaptor - 15mm F x 1/2" BSP TM BES - Part Number [-----] Screwed S/Steel Hexagon Reducing Bush 1/4" x 1/8"" [YouTube Link](https://youtube.com/watch?v=IB1hdxpkR1Q) 2023-05-16T20:22Z 679K followers, 10.7K engagements "How to fix a leaking toilet pipe #shorts #asmr #asmrsounds #diy #plumbing #subscribe #foryou In todays ASMR Plumbing video I was called out to a leaking toilet so I had to remove the toilet out of place to be able to change the pan connector fittings as they were leaking to remove the silicon on the back of the toilet tank. I heated up a trail with a blow torch pushed it down on top of a silicon and it melts all the way through a nice easy way to remove thatthen its just a case of removing the old parts installing a new and putting it all back together again" [YouTube Link](https://youtube.com/watch?v=IfZr4VBpObw) 2025-11-23T07:09Z 687K followers, 55.9K engagements "How to solder a vertical copper fitting with no drip #subscribe #youtubeshorts #instagram #plumbing" [YouTube Link](https://youtube.com/watch?v=LDkxobB4GAY) 2023-05-14T13:14Z 697K followers, 20.3K engagements "Freezing copper pipe to fit new isolator #asmr #diy #howto #tools #shorts #subscribe #viral #foryou In this ASMR Plumbing video Im freezing a copper pipe to fit a new isolation valve. With the pipework full of water I wanted to be able to cut an isolation valve in without draining the system so Im showing how to use a freeze kit to be able to do this The freeze kit Im using is from arctic hayes in the uk. The kit comes with a few wraparound pockets which attach using a hose to the freeze bottle. The aim is to try and not waste so much liquid and rely on the vapour to freeze but sometimes you" [YouTube Link](https://youtube.com/watch?v=M-SK_5H-kSU) 2025-02-08T17:00Z 605K followers, 430.4K engagements "New liquid PTFE XPRO Gripaloc #asmr #asmrsounds #tools #howto #diy #subscribe #youtubeshorts In this plumbing video Im showing off a newnproduct that has come to market. There is a nice liquid ptfe thread sealer on the market and that is from XPRO This ptfe replacement is more like the [---] we all use and love and a lot better than the blue as its non drip In this video you can see the difference in the [--] products. The blue stuff drips everywhere which will stain anything it touches The new gripaloc is a yellow in colour and much thicker which is better and far less likely to drip on the" [YouTube Link](https://youtube.com/watch?v=NdghpkXKmKM) 2024-06-30T16:00Z 709K followers, 2.4M engagements "The BEST drywall fixings to fix a toilet #howto #diy #asmr #tools #plumbing #foryou #subscribe Welcome back to the channel on todays video. I was working on a toilet and needed to screw the toilet back against the wall. This wall had a void behind which is common either a stud or drywall. My most preferred fixings are these from Bullfix which require you to drill a [--] mil hole and push a insert inside and then the fishtail like fixings get touched inside of that and they spread either side given maximum strength to hold what youre fixing on the wall Ill put a link down below so you can check" [YouTube Link](https://youtube.com/watch?v=OEwwVPK0w0A) 2025-11-18T07:00Z 692K followers, 516.9K engagements "Fixing the easiest plumbing leak #howto #diy #asmr #asmrsounds #tools #subscribe #shorts #foryou Eness ASMR Plumbing video I am fixing the easiest plumbing leak. We get caught out to these jobs quite often where the homeowner has turned off the water using the tap turned it back on again and found out that the tap is dripping. The easiest way to fix this is just by nipping up the packing gland which is just behind the handle oil it needs is about a quarter of a turn. You can take it completely out and put some PTFE tape inside but normally I find that just nipping it up works just as good." [YouTube Link](https://youtube.com/watch?v=PPrKjuHgHN0) 2025-02-10T17:00Z 606K followers, 291.7K engagements "How to make my heat proof burn TROWEL Welcome back to the channel on todays video I thought Id show you exactly how I make my heat proof burn trowel. This is a tour that I use in all my soldering jobs as its nice and thin and fits behind pipework really easily protecting a customers property. I get asked this question so many times on what I use exactly to make the ones I use in my videos and thats the reason why I made this video today so its not exactly rocket science you can probably guess but in theory it is a [--] inch builders trial with a heat burn Matt Stuck to it using heat resistant" [YouTube Link](https://youtube.com/watch?v=PoZJm6xsL-Y) 2025-11-04T18:46Z 679K followers, [----] engagements "How to fit a drain valve on a radiator #howto #diy #plumbing #asmr #tools #subscribe #shorts" [YouTube Link](https://youtube.com/watch?v=Q9p9mdfr_x0) 2025-06-12T16:00Z 706K followers, 190.5K engagements "Fixing a leak on plastic pipe to radiator #shorts #asmr #asmrsounds #diy #plumbing #tools #shorts Welcome back to the channel on todays video Im showing how to fix a leak on a plastic pipe fitting to a radiator. Ive got called out to this customers house because they have a leak coming from a fitting on a plastic pipe to a radiator valve. These fittings are very common in a brand-new belt as a transition from [--] mm micro pipes to a [--] mm compression valve. The easiest way I find to replace these is by turning off the boiler and draining the heating system down enough so theres very little of" [YouTube Link](https://youtube.com/watch?v=QRIHD3rR9a0) 2025-11-12T17:00Z 687K followers, 511.1K engagements "Toilet plumbing hack #howto #diy #asmr #subscribe #youtubeshorts #learn #foryou #ytool #asmrsounds How to extend toilet connector the right way. There are many ways to get over a pan connector being too short but using the right connector will get over this problem. If you use [--] pipe its too big so you need to use the correct connector or you will push the rubber out the fitting. If you liked this asmr plumbing video then please give it a like comment below if you would do anything different and please subscribe if you are new See you on the next one" [YouTube Link](https://youtube.com/watch?v=QcEn_Cf5EDs) 2024-09-11T16:31Z 706K followers, 2.1M engagements "I was wrong Welcome back to the channel on todays video. Ive been called out to a customers house because theyve got a loud banging humming noise coming from the hot tap on multiple fixtures. It doesnt matter whether you open up the shower bath taps or basin taps this loud continuous noise happens until the taps are turned off. This noise is what we class as waterhammer in the Plumbing industry and its normally generated from like a ball valve or taps with a washer inside thats jumping around this echoes all the way through the house especially as on this system it is fed from a Combi boiler" [YouTube Link](https://youtube.com/watch?v=Scc3IUR1vxQ) 2025-10-24T16:01Z 677K followers, 29.3K engagements "Fixing kitchen sink plumbing and high pressure issue Welcome back on todays video. Ive been called out to a customers house because they have really high water pressure issues a kitchen sink tap to change and while Im there Im going to install a limescale filter on the watermain as Ive got it all in pieces anyway. To solve these issues Im gonna be installing a pressure reducing valve on the incoming watermain. We got quite a decent bit of space and were gonna be installing an isolation valve after as turning the water on and off in emergency on the stop tap can be a little bit fiddly. ." [YouTube Link](https://youtube.com/watch?v=TIPxriG_pZA) 2025-06-20T16:00Z 706K followers, 38.3K engagements "Easiest way to bend over a pipe #asmr #tools #tips #foryou #shorts #subscribe #diy #learn #plumbing In his ASMR Plumbing video Im showing how to bend copper pipe over another pipe using a different method than a normal traditional way but hopefully a lot easier. Using the traditional benders you would be half guessing the angles because the lines arent really that well labelled to where you need to bend to so to make a full crossover fitting like this can take a little bit of time a bit tedious and its easy to get wrong Using my Monument pipe benders the markings are very simple. Its at" [YouTube Link](https://youtube.com/watch?v=TYxKgB82BxE) 2025-02-18T17:00Z 609K followers, 72.7K engagements "Soldering copper pipe with a pipe stand #asmr #asmrsounds #tools #diy #plumbing #shorts #subscribe" [YouTube Link](https://youtube.com/watch?v=XRFX9dwwfKk) 2025-10-04T06:27Z 676K followers, 50.8K engagements "How to fix a leaking sink waste like a pro #howto #diy #plumbing #asmr #shorts #subscribe #tools Welcome back to the channel on todays video. Ive been called out to a customers house because their kitchen sink waste has come loose and started to cause a leak. The easiest way to fix this is by removing it at fitting a new one as you have all brand-new seals and the way that I like to make them into the sink is you silicon as if you dont you run the risk of them becoming loose over time especially with heat and also the rubber these days isnt exactly rubber anymore. It feels more like plastic" [YouTube Link](https://youtube.com/watch?v=Xf4dDU3psto) 2025-11-27T17:01Z 694K followers, 132.1K engagements "veto wrencher tool bag review 🔥" [YouTube Link](https://youtube.com/watch?v=Xk8WUnQrx74) 2022-10-02T20:41Z 695K followers, [----] engagements "How to stop your outside tap from freezing #asmr #howto #diy #craft #plumbing #hack #shorts #tools" [YouTube Link](https://youtube.com/watch?v=XpMVPnuvOHQ) 2025-10-13T06:09Z 673K followers, 59.5K engagements "How to fix a cold radiator Welcome back to the channel on todays video. I was sent out to a customers house because they had a radiator that wasnt getting hot. All the other is on the system working perfectly and it was just a single one that was struggling so if you have a cold radiator. Theres two things to check one is air and the other is the valves. if the valves arent letting the flow through the radiator then it wont circulate and therefore get hot if theres air in the system generally you have warm at the bottom but cold everywhere else The first thing to check is air and all you need" [YouTube Link](https://youtube.com/watch?v=YHDR3hiLQu4) 2025-11-14T17:01Z 684K followers, 12K engagements "How to fix a leaking air vent like a pro #howto #diy #asmr #shorts #tools #plumbing #subscribe" [YouTube Link](https://youtube.com/watch?v=YgcMA4jHWDg) 2025-11-01T07:10Z 679K followers, 193.7K engagements "How to remove silicone and apply new #asmr #howto #diy #tools #tips #learn #shorts #subscribe" [YouTube Link](https://youtube.com/watch?v=YzcO3MU5Toc) 2025-02-21T17:00Z 610K followers, 26.4K engagements "How to fix a dripping tap #tap #dripping #diy" [YouTube Link](https://youtube.com/watch?v=ZZf2UKOdR-o) 2023-06-26T19:05Z 702K followers, 47.6K engagements "How to first fix for a bath and shower #howto #asmr #tools #shorts #subscribe #foryou #diy #tips" [YouTube Link](https://youtube.com/watch?v=Z_Qvi9YLNpI) 2025-06-26T16:00Z 675K followers, 74.8K engagements "How to repair a leak on flexi pipe #asmr #diy #subscribe #youtubeshorts #plumbing #tools #plumber Fixing a leaking flexi hose pipe for a kitchen sink tap Plumbing asmr video The hose was far too long and the flex kinked it self over time which ruptured the inside of the flexi hose. New short flexi pipes was fitted and connected back up to the isolation valves. Always make sure the hoses are supported if long to stop this from happening" [YouTube Link](https://youtube.com/watch?v=_wkL18hGt_s) 2024-04-17T15:56Z 683K followers, 5.3M engagements "Fixing a sink waste thats holding water #asmr #asmrsounds #tools #diy #plumbing #shorts #subscribe" [YouTube Link](https://youtube.com/watch?v=aDqjjkOFvYM) 2025-11-08T17:00Z 709K followers, 12.3M engagements "How to fit a tap to a stone wall #asmr #diy #howto #foryou #tools #plumbing #shorts #subscribe In this ASMR Plumbing video Im installing an outside tap onto a stone wall. The pipework had to come through where it was and there was no fixing on the stones below so thats the reason why I mounted it on the stone above. I couldnt use a wall plate as where the pipe come through. There was a lot of cement and the brick wasnt strong enough around it to be able to drill fixings hence the reason why the pipes come through and Ive had to solder a [--] to be able to mount it on the stone. After cleaning" [YouTube Link](https://youtube.com/watch?v=a_naxPDVors) 2025-02-19T17:00Z 609K followers, 33.3K engagements "No wonder this wouldnt work Welcome back to the channel on todays video. Ive been caught up to a customers house because they got no hot water. They have a hot water tank with two heating elements and I can only assume that one of them has gone wrong Because I need to drain the whole tank down its much beneficial for the customer and myself to change both of them at the same time. This tank is what we class as a unvented system which is pressurised by means water. These tanks have a common issue when trying to drain as normally they like to airlock which can be very annoying to get all the" [YouTube Link](https://youtube.com/watch?v=b_DqGtfvdxU) 2025-11-21T17:01Z 687K followers, 27.2K engagements "New Tools And My New Tap Bag Loudout Welcome back to the channel on todays video Im gonna show you my new tap tool bag loadout using the tool roll bag from atlas46 This tool role configuration sparked my interest as its fully made from canvas which makes it super light and it wont scratch any of my customer services whether I put it on the floor or up on a kitchen worktop. It has good separation for my tools as it groups certain tools together so I know where they all are after I use it all I literally just drop it straight back down and then I know Ive always got it in there . We have four" [YouTube Link](https://youtube.com/watch?v=bb-hJ6IP9Jc) 2025-11-25T17:01Z 687K followers, [----] engagements "Making my own flexible pipe toilet connection #asmr #diy #plumber #tools #shorts #subscribe #foryou Welcome back to the channel todays video Im replacing a toilet flexible connection with making my own. These flexible hoses have a rubber hose on the inside and a braided on the outside what tends to happen is that they can break down and even split. In todays video Im making my own using Viega smart press mlcp pipe and connections by bending it into place and replacing the isolation valve to an angled. This pipe is lined with metal so it keeps its shape and will last many many years. We have" [YouTube Link](https://youtube.com/watch?v=cdTH2a2E2yk) 2025-10-18T06:32Z 678K followers, 144.5K engagements "How to silicone shower enclosures #subscribe #plumbing #silicone #caulking" [YouTube Link](https://youtube.com/watch?v=cfc5YxLxZPY) 2023-07-26T18:24Z 686K followers, 71.9K engagements "Plumbing up micro pipes to a radiator #howto #diy #asmr #asmrsounds #tools #shorts #subscribe In this ASMR Plumbing video I and Plumbing up micro pipes to a radiator. The pipes dropping down the wall in the trunk in are [--] mm so Ive continued to run the pipes along the wall onto the radiator in one length using my pipe bender. The fittings that are used to connect the new pipe to the old pipe was a Yorkshire solder filled fitting and how I like to connect it onto the radiator is using a 10mm to 15mm long tail reducer. I really dont like [--] mm valves. The seal can crash onto the pipe very easy" [YouTube Link](https://youtube.com/watch?v=dzmnp8oVueI) 2025-02-13T17:00Z 606K followers, 42.9K engagements "The best way to fix a leaking kitchen sink waste #asmr #howto #diy #tools #shorts #subscribe" [YouTube Link](https://youtube.com/watch?v=eTIl_rPvY7s) 2025-09-06T06:15Z 677K followers, 171.4K engagements "How to fix a leaking sink waste like a pro #howto #diy #plumbing #asmr #tools #shorts #subscribe" [YouTube Link](https://youtube.com/watch?v=gD4lcqKy9Ik) 2025-10-03T05:40Z 687K followers, 496.8K engagements "Plumbing up a tap with less joints to leak #asmr #diy #plumbing #shorts #subscribe #foryou #tools In this ASMR Plumbing video Im changing a set of taps on a sink and re Plumbing up the pipework with less joints to leak After removing the half pedestal off the wall under the sink I began to remove the old sink tap and disconnect the feed from the Plumbing. Normally when I disconnect the plumbing feeds I remove the nuts and washers and after inspecting the pipework when the olives have come off the pipework was damaged which is the reason why I had to cut before it and extend the pipes" [YouTube Link](https://youtube.com/watch?v=gQpSfTQdcvc) 2025-02-23T15:53Z 611K followers, 40K engagements "5 tools for a plumbing apprentice [--] tools for a plumbing apprentice In this video Im explaining which [--] tools an plumbing apprentice needs or should carry at all times The main idea for an apprentice in my eyes if you need to try and be one step ahead of whoever youre working with that generally makes their life easier passing kit or cleaning up behind him will make you seem the best apprentice in the world to the person youre working with. If you can carry a small amount of tools with you and save taking the tools away from your mentor then that will keep him from working and if not hes only" [YouTube Link](https://youtube.com/watch?v=gTnUBytUA-8) 2025-02-25T18:05Z 611K followers, [----] engagements "How to fix a leaking toilet #vlog In todays #plumbing #vlog video Im showing how to #fix a leaking toilet Plumbers worst #nightmare with the dread blue block dye Ive been called out to a customers property where they have a leaking toilet. They showed me a picture and theres blue dye everywhere which is from limescale blocks. The approach of and plan of action is to remove the blue block before working as if this guy gets on anything it will stain forever . Wants the blue block is out and diluted. Im able to remove the system and do the cold water feed and remove them from the toilet to empty" [YouTube Link](https://youtube.com/watch?v=geRip_-2dBo) 2025-02-21T18:00Z 610K followers, [----] engagements "New improved pipe fitting Welcome back to the channel todays video I thought Id show you a pope fitting that Ive come across and I know you probably havent of seen it. We have all seen tap connector fittings which normally adapt from copper to a male threat. These ones have a ridge which allows a fibre washer to sit inside without moving. The only problem with this fitting is that you can only use that type of washer and we all know if they get a little bit of moisture then they always breakdown and cause a leak. While I was visiting a shop in London which was Lhp supplies. I was shown a" [YouTube Link](https://youtube.com/watch?v=hZCHDBGjYDA) 2025-11-18T17:01Z 685K followers, [----] engagements "How to get perfect pipe lagging joints #asmr #asmrsounds #diy #tools #shorts #subscribe #tips In this ASMR Plumbing video I am showing how to get perfect joints when lagging copper pipes. If you have pride in your paperwork when installing pipework then you have to have the same standards with the insulation that covers it. Getting perfect joints using a template cutter like this one will ensure that all your joints butt up to each other with no gaps as long as you get the distance is right. The tool makes it really easy to cut your [--] [--] and can even cut for long radius bands using a 22.5" [YouTube Link](https://youtube.com/watch?v=hyxijtr6tWc) 2025-02-11T17:00Z 606K followers, 1.2M engagements "How to change a Tap Washer #subscribe #diy #plumbing" [YouTube Link](https://youtube.com/watch?v=iZrmXaHZ7L4) 2023-07-14T17:37Z 676K followers, 31.5K engagements "How to finish radiator pipes like a pro #asmr #diy #subscribe #tools #plumber #plumbingfitting Asmr plumbing video on How to finish copper pipe like a pro with radiator pipes out the floor. Simple fit the radiator and after its all done slide the cover open the top splitting in the middle. Then measure and cut the sleave to size that clamps over the copper pipe giving a professional clean chrome finish" [YouTube Link](https://youtube.com/watch?v=jELXJB0rVbY) 2024-03-01T12:46Z 687K followers, 8.3M engagements "How to clear air lock in taps #plumbing #diyequipment #diy #plumping #howto" [YouTube Link](https://youtube.com/watch?v=kWGz6EqBCcw) 2023-10-07T18:52Z 695K followers, 392.1K engagements "New Knipex Grips Welcome back to the channel todays video is all about upgrading my current knipex grips The Cobras have been a set standard in my tool bag so many years now Ive used these for at least 10-12 years and I honestly wouldnt have any other brand. Ive tried many many different types of grips and the ones from Knipex feel the best in our hands they very well economically designed. The handles are nice and slim and when you close them up they finish really close together they do lots of different sizes. My favourite are the [---] and the [---]. The [---] I mainly use for sizes above [--] and" [YouTube Link](https://youtube.com/watch?v=mCVZgLM3CYc) 2025-10-21T16:01Z 674K followers, [----] engagements "How to unblock a toilet like a pro #asmr #howto #diy #tools #subscribe #foryou #shorts #plumbing" [YouTube Link](https://youtube.com/watch?v=mUcsYWbf9eI) 2025-10-22T16:02Z 677K followers, 32.6K engagements "How to sharpen a multitool blade like a pro #asmr #asmrsounds #diy #tools #subscribe #shorts" [YouTube Link](https://youtube.com/watch?v=nPHQvDN6QJ4) 2025-10-26T07:31Z 678K followers, 151.4K engagements "Lazy plumber installed this toilet In todays plumbing video I have been sent to fix a toilet that is leaking constantly into the pan. The main reason why this happens is due to the siphon washer leaking past or the fuel valve constantly runs and doesnt shut off. The problem that the customer has is that they hear random surgeon noises through the night and that is because the toilet is losing water through the washer and the fill valve has to fill back up to its original level. The Plumbing on his toilet isnt the best. The previous plumber installed two flexible houses together which just" [YouTube Link](https://youtube.com/watch?v=nXLDl6htE58) 2025-03-21T17:01Z 673K followers, 85.4K engagements "What the inside of a perfect soldered joint looks like #asmr #diy #howto #tools #plumbing #shorts In todays ASMR Plumbing video Ive cut open a section of a Yorkshire solder ring fitting to show you exactly what it looks like from the inside. These fittings have solder pre-installed inside of them so there is no need to add extra if you want to be extra safe then only a little amount is needed for maximum security and confidence. I hope you like this video. If you do please give it a like comment down below if youve ever used these types of fittings and please as always subscribe if you are new" [YouTube Link](https://youtube.com/watch?v=ndaZ8WsVxy4) 2025-11-21T07:00Z 686K followers, 22.6K engagements "The CORRECT way to connect a tap flex to an isolation valve #asmr #tools #diy #plumbing #shorts In todays ASMR Plumbing video I was installing a new tap and the flexibles I wanted to connect up the correct way of connecting the flex line onto the isolation valves. In my opinion the only way of doing this is by tightening up the nuts with jointing compound as that will stop them from leaking and because the isolation valves has a bevelled edge. You need to swap that out or convert it to flat face that is where the little adapters come in handy and then I can put the new flex line on the valve" [YouTube Link](https://youtube.com/watch?v=ogff_BhwF-M) 2025-11-25T07:15Z 697K followers, 113.8K engagements "How I fix this toilet Welcome back to the channel on todays video. Ive been called out to a customers house because they have got some toilet problems. Upon arrival I found this toilet flush was in parts theyve obviously had issues flushing so in typical MM plumber fashion Im gonna be stripping it all out and rebuilding the toilet with brand-new parts. The flexible hose could look better so as you are aware I like to hard pipe these so Im gonna show you exactly how to do that and bend the copper pipe perfect from a new isolator into the toilet Ive isolated the water outside so Im able to cut" [YouTube Link](https://youtube.com/watch?v=olNjoBCLuZo) 2025-10-31T17:01Z 679K followers, 11.5K engagements "How to plumb a instant hot water tap #howto #diy #asmr #shorts #subscribe #tools #foryou #learn In this asmr plumbing video Im installing an instant hot water tap heater. The unit Im installing is from water drop which not only heats up your water and turns your tap into a kettle but it also filters your cold water using reverse osmosis The unit is super easy to install with its push fit like connections and I love the digital display on the tap its self. The model Im installing is just a stand alone hot water tap so you it wont replace your original kitchen sink tap but give you the open to" [YouTube Link](https://youtube.com/watch?v=oobyUgIpnhI) 2024-11-13T17:00Z 679K followers, 394.9K engagements "How to connect a tap flexi the correct way #asmr ##asmrsounds #howto #diy #subscribe #youtubeshorts Stop connecting your taps the wrong way and do this instead In this asmr plumbing video Im showing how to connect a tap flexi the correct way The wrong was it just connecting onto an isolation valve. This is due to having a small surface area and also being bevelled it will cut into the washer in the tap flexi Instead always fit a flat faced male iron or find an isolation valve that is flat on one side Be a cut above the rest and start connecting your taps up the correct way" [YouTube Link](https://youtube.com/watch?v=pOlBSxDGe2o) 2024-06-21T16:00Z 705K followers, 193.8K engagements "How to fix a leaking compression joint #asmr #shorts #diy #howto #tools #tips #plumbing #subscribe In this ASMR Plumbing video Ive been called out to a job where there is a compression fitting leaking on top of a hot water cylinder because the pipework comes from above my approach was to cut a leave of valve in so I could control the water flow coming back at me and using a hacksaw. I cut a tiny slot in the pipe so I know exactly how much water is inside and how much pressure is in the pipe. If you dont do this and go straight with a pipe slice and find out that you have an isolated it" [YouTube Link](https://youtube.com/watch?v=pmUHtI5BrrE) 2025-02-20T17:01Z 610K followers, 51.2K engagements "How to lag copper pipes like a pro #asmr #asmrsounds #diy #howto #subscribe #youtubeshorts #tools In this asmr plumbing video Im showing how to lag copper pipes like a pro and get perfect joints This in video Im using the pipe lagging tool from www.drpipe.co.uk and a folding lagging knife from plumbpal. Together using both these tools I can measure the angles and cut them perfectly together to get seamless joints for the perfect lagging job If you liked this asmr plumbing video then please give it a like comment below if you would do anything different and please subscribe if you are new See" [YouTube Link](https://youtube.com/watch?v=qAolmKpCw2w) 2024-08-20T06:05Z 702K followers, 20.9M engagements "What A Mickey Mouse Job Welcome back to the channel on todays video Im gonna be installing one of the worlds most expensive and rarest outside taps but you can get on the market. This outside garden tap must be some sort of collaboration with Mickey Mouse and Im going to be installing it at my Nans house who is a big Disney fan and as soon as I saw that this was available I had to buy it for her for her garden Never gonna have to alter the back plate that it fixes to as this tap is from America and is a three-quarter thread normally in the UK or outside taps or half inch so Im gonna need to" [YouTube Link](https://youtube.com/watch?v=qPaxAcrrrr4) 2025-12-05T17:01Z 689K followers, 10.2K engagements "HOW To sharpen a multitool blade for multi use #howto #diy #plumbing #asmr #subscribe #revivablade If you have a damaged multiblade or kit something to blunt yours there is hope to reuse your blade now in stead of throwing it away and using another The reviva blade can re sharpen by cutting new heath into your blade With some technique you can get the blade to cut just as good as a new blade" [YouTube Link](https://youtube.com/watch?v=qn-aTfmq258) 2024-01-22T06:57Z 679K followers, 21.9M engagements "Using the best plumbing tools to fix leak #asmr #asmrsounds #howto #diy #subscribe #youtubeshorts In this plumbing asmr plumbing video Im fixing a leak on a cold water main pipe. The leaks on a soldered fitting tee feeding an electric shower and roof tank above. First thing is to show the water off and cut the pipe to drain the water into my derblaue buckets and using a funnel to catch the water. Installing a lever valve to help control water better and then simply replumb the copper back up with solder and ended joints" [YouTube Link](https://youtube.com/watch?v=r-O-Q6-MrgM) 2024-07-29T16:00Z 683K followers, 582.5K engagements "How to fix a loose tap for new #asmr #howto #diy #foryou #shorts #subscribe #tools #plumbing" [YouTube Link](https://youtube.com/watch?v=rlQIEEWdeX0) 2025-10-11T07:00Z 706K followers, 417.5K engagements "Which Wera joker spanner should you buy #tools #diy #tips #plumber #subscribe #shorts #review In this video Im explaining which Wera joker spanner should you buy In all my videos you see me use the Spanish and no matter times that I get asked which one does what is amazing so I thought I would make this video to hopefully explain a little bit more and answer some of your questions. So I normally carry three of the Wera joker spanners in my tall bag at all times I have the L XL and XXL versions all for specific Plumbing tasks. The L I use money for all my radiator valve work so when you need" [YouTube Link](https://youtube.com/watch?v=sEnI1TyvzFM) 2025-02-25T17:01Z 677K followers, 51.5K engagements "How to plumb up a radiator valve to pipe #howto #diy #asmr #tools #shorts #subscribe #asmrsounds" [YouTube Link](https://youtube.com/watch?v=sjnkMrkyREE) 2025-10-21T06:04Z 696K followers, 1.4M engagements "These connectors are a must for all plumbers Welcome back to the channel on todays video. I got caught out to a customers house because they had trouble trying to install a new kitchen sink tap on their own. The new feeds are 3/8 connections when the old was 1/2. This is common in Europe especially if you buy taps from there such as grohe or handgrohe. Lucky for me there is isolation valves underneath in [--] mm so I can adapt to the smaller size using a simple brass fitting. Im gonna show you how to remove the old tap and fit the new one and on my visit to China and Hong Kong. I found a tool" [YouTube Link](https://youtube.com/watch?v=uHgUmd2N-as) 2025-12-02T17:01Z 706K followers, 94.6K engagements "How to install a hot outside tap #howto #diy #tools #foryou #asmr #shorts #subscribe #plumber" [YouTube Link](https://youtube.com/watch?v=uThBIrPMBTE) 2025-07-10T15:58Z 701K followers, 263K engagements "Best Copper Pipe Bend Hack #asmr #asmrsounds #tools #plumbing #shorts #hack #subscribe Welcome back to the channel in todays ASMR Plumbing video Im showing how to bend copper pipe perfectly into place using the Monument benders. I simply marked up where I wanted the posts to be bent measured back [--] mm and then put the hook of the benders on that Mark and Im able to pour a full [--] band leaving the Pipe perfectly to fit exactly where I wanted it . This is a really good hack to not waste copper and to be more efficient without using Bends to gain maximum flow if you like todays Plumbing video" [YouTube Link](https://youtube.com/watch?v=vaPcsGtfPDc) 2025-10-15T05:30Z 679K followers, 90.6K engagements "CT1 Miracle seal to fix pin holes in copper #subscribe #youtubeshorts #instagram #plumbing" [YouTube Link](https://youtube.com/watch?v=voQEP2KtOE8) 2023-05-22T10:24Z 686K followers, 35K engagements "Fixing a leaking toilet with silicone everywhere #asmr #howto #diy #tools #foryou #shorts #plumbing" [YouTube Link](https://youtube.com/watch?v=w5o193r2rlM) 2025-10-14T06:04Z 679K followers, 214.5K engagements "How to measure and cut pipe for radiator valves #asmr #howto #diy #shorts #subscribe #tools #foryou In todays ASMR Plumbing video Im showing how to cut down your pipes to the correct height for radiator valves. The easiest way I find to do this is to put the valve on the pipe first measure the internal depth by marking the bottom of the nut and then take the valve off hoover it to the side of the pipework and mark on the valve where the pipe finishes Now you can hover the valve to the correct height position on the radiator and Mark the pipe to cut. They should get you exactly where you want" [YouTube Link](https://youtube.com/watch?v=wCrHCTJ-b0s) 2025-09-14T16:01Z 707K followers, 727.3K engagements "How to fit an outside tap to the wall like a pro #howto #diy #plumbing #asmr #shorts #subscribe In todays asmr plumbing video Im installing an outside tap to a red brick new built house. First you need to drill a 22mm hole so we can sleeve the hole with over flow plastic pipe at 20mm od. This sleeve is so the pipes protected from cement corrosion and if the pipe pin holes inside it will show either end. Once the hole is drilled and sleeved I can enter the outside tap stem inside and begin to mark the mounting holes. Once marked I can drill with a [---] drill bit and insert red plugs. Some" [YouTube Link](https://youtube.com/watch?v=xQO-oAbQkGA) 2025-10-09T16:01Z 678K followers, 419.7K engagements "Replacing a toilet flexi pipe for copper #howto #diy #plumbing #asmr #asmrsounds #tools #shorts Welcome back to the channel on todays video. Ive been called out to replace this flexible pipe onto the toilet and replace it with hard copper. The customer didnt like the look of this and they wanted to paint the pipe to blend in copper pipe is a much more reliable line than the flexible as inside is flexible. There is a rubber hose which can rupture at least with a copper line. The only weak point is the joint at the top. Start by removing a line with my Wera joker xl spanner. This is a self" [YouTube Link](https://youtube.com/watch?v=xxPg3YUasBY) 2025-11-02T07:01Z 706K followers, 1.4M engagements "How to solder copper pipe without burning Welcome back to the channel on todays video. Im connecting up some radiator pipes to the existing system pipework. We have [--] mm and [--] mm to cut and put two ties to join up on new pipework. After draining the heating system I always like to cut the copper using a hacksaw as this is easily controllable if you still have water insight as youre able to either tape up the cut or catch it in a bucket nice and easy in one position. Using the same hacksaw I sliced through both of the pipework so then I can stick a manometer hose over the top and suck the" [YouTube Link](https://youtube.com/watch?v=ya1YLv4aANQ) 2025-10-30T17:01Z 680K followers, 96.5K engagements "How to bend a perfect copper pipe set first try #asmr #hack #diy #howto #foryou #shorts #tools In this ASMR Plumbing video Im showing how to bend a set on a piece of [--] mil copper pipe. This set is a normal bends that all plumbers have to do to get things back in square if things are slightly out of line and using this formula it is really easy to be able to get it done first try. The formula consists of bending at [--] angles times in the distance required by [---] and set two marks at both these points in a specific spot of the bender while bending at [--]. Will get you the perfect distance in" [YouTube Link](https://youtube.com/watch?v=yuVLkgqvUiM) 2024-12-13T17:01Z 704K followers, 236.9K engagements "How to get an apprenticeship Welcome back to the channel on todays video Into my old college to talk with my college lecture on how to get an apprenticeship. This is my lecturer mr Dave Quinton at SGS Stroud college who was my teacher [--] years ago. I get constant questions on how to get an apprenticeship or asking which course is best for them and I thought there would be no better person to talk to apart from my old teacher. In this video we go through a few tips on how to get an apprenticeship what youre expected to do within it how long it is what qualifications you need and whether doing" [YouTube Link](https://youtube.com/watch?v=zb08uYOjOrE) 2025-11-03T17:01Z 687K followers, [----] engagements "How did this plumber not have a leak In todays video Ive been called out with two problems in this property the first being a tap on the kitchen sink which is completely snapped and a flexible hose underneath looks like its ready to burst On a leaking toilet pipe which is connecting onto the toilet fill valve is leaking due to the fibre washer deteriorating. So the main reason why this tap is considerably loose is that the back nut underneath has completely snapped leaving the top super wobbly as its plumbed up using a flexible . When looking underneath the sink unit this flexible hose is all" [YouTube Link](https://youtube.com/watch?v=-5GYou49Xqg) 2025-03-07T18:00Z 616K followers, [----] engagements Limited data mode. Full metrics available with subscription: lunarcrush.com/pricing
@mmplumber mmplumber
mmplumber posts on YouTube about diy, how to, copper, howto the most. They currently have [-------] followers and [---] posts still getting attention that total [---------] engagements in the last [--] hours.
Engagements: [---------] #
- [--] Week [----------] +117%
- [--] Month [----------] +96%
- [--] Months [----------] +76%
- [--] Year [-----------] -44%
Mentions: [---] #
- [--] Week [--] +43%
- [--] Month [---] +21%
- [--] Months [---] +27%
- [--] Year [---] +246%
Followers: [-------] #
- [--] Week [-------] +0.56%
- [--] Month [-------] +1.70%
- [--] Months [-------] +8.80%
- [--] Year [-------] +19%
CreatorRank: [------] #
Social Influence
Social category influence finance #297 social networks #3406 technology brands #4082 countries travel destinations automotive brands stocks
Social topic influence diy #278, how to #127, copper #4, howto #13, tap #77, back to, pro #125, youtube #1696, asmrsounds, tools #152
Top accounts mentioned or mentioned by @mmplumbert8llf5m4ddh7r1 @lhpsuppliescouk @rogerthepipeguy
Top assets mentioned Flux (FLUX) Flex Ltd. Ordinary Shares (FLEX)
Top Social Posts
Top posts by engagements in the last [--] hours
"How to join copper pipe with no movement #asmr #howto #diy #tools #plumbing #shorts #subscribe In todays ASMR Plumbing video Im joining copper pipe which has no movement on it so the only way to join with a fitting is to make a slip coupling. You can buy these fittings but I never had one so I used a file to file out the inside lip of a normal and feed join and this allows the fitting to slide up and down the pipework. You need to mark the pipe for the internal depth of each side of a fitting and then when you flux up the pipe and join you can slide the fitting all the way over one part of"
YouTube Link 2025-12-15T17:07Z 717K followers, 487.6K engagements
"How to bend perfect pipe sets like a pro #asmr #plumbing #diy #tools #shorts #subscribe Welcome back to the channel in todays ASMR Plumbing video Im showing how to bend copper pipes perfectly like a pro. For this demonstration Im bending copper pipes from clip distance into a bathroom sink tap. Im using [--] angles using my monument pipe benders. First thing you wanna do is measure the distance you need to bend what I like to do is use some bits of copper and then measure either pipe centres or outside to inside. Theres a simple pipe bending formula which is written below: [--] degree x [--] 45"
YouTube Link 2026-02-07T17:00Z 717K followers, 2.3M engagements
"My Best Plumbing Tools Welcome back to the channel on todays video. Im gonna show you all of my top asked about plumbing tools that Ive used in my videos. I get asked all the time. What to Im using and where you can get it from so hopefully this video will clear up some questions and you can find exactly where to get them from ______________________________________ Tools featured in this video: Techers pipe cleaners https://www.techersltd.com/store/p/copper-pipe-cleaner Derblaue foldable tub"
YouTube Link 2026-01-01T17:00Z 717K followers, 42.4K engagements
"Pipework shambles to copper master piece Welcome back to the channel on todays video a customer has called me out to fit a new limescale water filter. Theyve had a water softener in the past which is still plumbed up underneath the kitchen sink but I didnt get on with it. It caused many leaks took up a lot of of cupboard space and they always forgot to put salt in it so it wasnt doing a lot anyway. So Ive been called in to rip all the pipework out as a previous plumber who installed all this mustve arrived on a horse. Theres nothing clipped. The pipework is here there everywhere and theres no"
YouTube Link 2025-12-09T17:01Z 717K followers, 65.7K engagements
"Fixing a leaking radiator valve like a pro Welcome back to the channel on todays asmr plumbing video I was sent from a customer to come and fix a leaking radiator valve. The valve looks like its been turned in place and the pipe has twisted and the customer put some tape and leak sealer over the top Theres it much water in this radiator as I put a drain hose on a radiator downstairs and its a pressurised system so it vents downwards Asoon as I crack the nut or open the air vent. Because the pipework is microbore 8mm I always cut the pipework and adapt to a soldered fitting instead of the"
YouTube Link 2026-01-28T17:01Z 717K followers, 532.8K engagements
"How to connect MLCP pipe to isolation valve #asmr #plumbing #tools #diy #shorts #subscribe ASMR plumbing video showing how to adapt MLCP Viega smart press to fit into compression isolation valve How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr"
YouTube Link 2025-12-10T17:00Z 717K followers, 428.7K engagements
"Fixing a leaking sink waste like a pro #howto #diy #plumbing #asmr #shorts #subscribe #tools Welcome back to the channel on todays asmr plumbing video I got called out to a leak on a sink waste when running water. When I removed the waste there was silicone but not in the right places I like to use the rubber on top and silicone under but sometimes it requires more on top too The waste pipe fittings needed removing as there was far too many fittings than needed. I changed the trap to a smaller and compact to give more room in the unit too How to DIY Plumbing ASMR ASMR sounds Foryou Best tools"
YouTube Link 2026-01-07T17:00Z 717K followers, 653.1K engagements
"How to cut pipe lagging for a tee Welcome back to the channel in todays ASMR plumbing video Im showing how to cut pipe lagging insulation over copper pipe for a T piece. Im using the pipe lagger pro from Amazon to achieve this cut perfectly its adjustable so it fits all pipe sizes and has multiple cut points on the tool which allow you to cut straight [----] and even [----] for pulled bends. If you spend all your time getting your pipework super neat then why not cover it with insulation just as neat for the job to be perfect Ill leave a link down below where you can get them from and Ill see you"
YouTube Link 2026-02-11T17:00Z 717K followers, 3.5M engagements
"Press valves are so much easier to install #asmr #diy #plumbing #tools #shorts #subscribe In todays ASMR Plumbing video I was on a job and I needed to shut off the water with this isolation valve which requires a flat head screwdriver. When I tried to turn it off it wouldnt move so I decided to swap it out for a press viega valve instead. Because the pipework after the valve was swaged I wanted fresh pipe outside of the valve so I cut above it and below to get that section out. To clean the pipes up I used my drill pipe cleaners from Techersltd which make light work of cleaning copper pipe"
YouTube Link 2026-01-03T17:00Z 717K followers, 324.3K engagements
"Radiator pipe bending and soldering #asmr #plumbing #diy #howto #subscribe #youtubeshorts #tools Asmr plumbing video on me connecting radiator copper pipework. Using a laser to keep everything straight a trowel for burn protection and a pipe bender to kick the pipe into place. Monument pipe bender huepar laser level ridgid pipe slice doing there job perfectly. Best plumbing tools used to get the job done Radiator pipework Bending copper pipe Soldering How to solder pipe Soldering copper pipe Copper pipe bending Connecting a radiator Plumbing a radiator Asmr Asmr plumbing Plumbers tools Tools"
YouTube Link 2024-04-01T13:46Z 717K followers, 28.6M engagements
"Using the best tools to hide a toilet flexible pipe #shorts #diy #plumbing #asmr #tools ##subscribe In todays ASMR Plumbing video I got sent out to a customers house because they have a toilet flexible pipe all on show to the side of their toilet and they wanted me to tidy it up for them. I started by removing the pipework as lowdown as possible and cleaning it up using my Techersltd pipe cleaner and peg to hold it still. This took the payoff really nicely and I was able to install an isolation valve low down out of the way as possible. Using some Yorkshire pipe fittings and some pipe I"
YouTube Link 2025-12-16T07:00Z 717K followers, 300.3K engagements
"How to replace a faulty radiator valve like a pro #asmr #tools #diy #plumbing #shorts #subscribe In todays ASMR Plumbing video Ive been caught up to a customers house to replace the radiator valve as its not working properly so Im gonna show you how to change it. I first released a bit of pressure from the heating system and then because its a pressurised Heating circuit I can start to undo and drain from the radiator Im working on. This will continue to glug and drip a little bit of water but using my drain down water catching bucket from Derblaue. These foldable products are perfect inside"
YouTube Link 2026-02-05T17:01Z 717K followers, 119.2K engagements
"Worlds first flow setting radiator valve #asmr #diy #plumbing #tools #plumber #shorts #subscribe In todays ASMR appointment video Im installing a brand-new radiator valve which has a flow setter on it so you can help balance a heating system especially if its big or being heavily extended. Water takes its easiest route and normally the radiators closest to the boiler get hottest and the ones further away can struggle. This also happens if you have radiators fed of the same pipe runs. These valves from Fre Power are like how you balance underfloor heating manifolds. I think this is a real cool"
YouTube Link 2026-01-24T17:00Z 717K followers, 3.1M engagements
"How to remove a stuck immersion heater #asmr #plumbing #tools #diy #shorts #subscribe Welcome back to the channel and todays video. I got caught up to a customers house because they needed some new water heater elements in the water tank. I started off by trying all the methods loosen it off with the tank full of water but that wouldnt budge and then I drained the tank and heated it up after removing the insulation and that didnt work so I had no option but to cut the elements out or fit a new tank. A new tank wouldve been a special order and a long wait especially over the Christmas period"
YouTube Link 2025-12-07T08:01Z 717K followers, 694K engagements
"HOW To remove water from pipe for soldering #howto #diy #plumbing #youtubeshorts #asmr #subscribe Soldering sometimes can be tricky is water if left in the pipework. There are many ways to remove it for soldering old way was to use an old gs manometer how and suck it out or put the wetvac on it. Using a little sprayer and dropping the stem into the pipe as far as it can really helps get rid of the water which produces steam that causes the problem when soldering with water in the pipe How to remove water from pipe Soldering copper pipe How to solder copper pipe Remove water in pipe Steam in"
YouTube Link 2024-01-15T06:33Z 717K followers, 2.4M engagements
"The BEST way to clean copper pipes howto #diy #asmr #plumbing #subscribe #shorts #tools #viral In todays asmr plumbing video Im showing how to clean copper pipes using the Techersltd pipe cleaners how to clean copper pipes clean copper pipe cleaning copper plumbing how to clean copper pipe before soldering clean copper pipe plumbing how to polish copper pipe remove oxidation from copper pipe clean copper pipe fittings how to clean copper pipes clean copper pipe cleaning copper plumbing how to clean copper pipe before soldering clean copper pipe plumbing how to polish copper pipe remove"
YouTube Link 2025-12-29T17:01Z 717K followers, 1.9M engagements
"The best way to get perfect insulation joints like a pro #asmr #howto #diy #tips #shorts #subscribe In todays ASMR Plumbing video Im showing how to cut insulation around copper pipes with perfect joints The toilet that Im using to achieve this is the pipe lagger pro. This is a fully adjustable pipe insulation cutting Jake which would do pretty much cover the whole range in pipe insulation sizes You can cut [--] joints even [--] joints as it has a [----] and also straight cut If youre going to spend the time making your pipework nice and neat then why not cover it up and finish a job to make it as"
YouTube Link 2026-01-01T07:33Z 717K followers, 1.2M engagements
"How to fix a leaking rusty toilet Welcome back to the channel on todays video. I got called out to a customers house because they had a toilet that just takes too long to fill. I took the tank lid off and as you can see the fuel valve is just not letting any water through and when a customer needs to flush the toilet there is no water to be flushed. The problem with this in store is that the ceramic on the toilet and closes access to the nuts provided to be able to take that fill valve out so were gonna have to do is take the tank completely off the pan and change all the parts inside the"
YouTube Link 2025-12-19T17:00Z 717K followers, 28.8K engagements
"Fixing a leaking toilet with a new flapper #asmr #diy #plumbing #shorts #subscribe #tools In todays asmr video Im fixing a leaking toilet with a flapper inside. The washer on the inside is letting by so I was sent to replace. These flappers I think are a brilliant design its just the push buttons that look dated. There simple to replace and spares are easy to get and keep stock How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr How to DIY Plumbing ASMR ASMR"
YouTube Link 2026-01-11T17:03Z 717K followers, 105.7K engagements
"Customers Plumbing Problems Are Now FIXED Welcome back to the channel on todays video. Im in called out to a customers house because they have multiple plumbing issues that they want me to look at. They think that they have a leak underneath a kitchen sink taps on a basin that move when trying to shut off as there is a constant stream of water. The shower doesnt allow any water to come out of it whatsoever so were gonna be replacing that for a new shower and also there is only lukewarm water coming out of the bath taps. The leak underneath the kitchen sink was just mainly condensation as it"
YouTube Link 2026-01-02T17:01Z 717K followers, 23.2K engagements
"Plumbing A Hot Water Outside Tap Tools featured in this video: Atlas46 Tool Chest Rig https://www.atlas46.com/online-store/Bennington-Tool-Chest-Panel-V3-p735326496 Check out this page from mmplumber https://www.amazon.co.uk/shop/mmplumberref_=cm_sw_r_apin_aipsfshop_YXH8AP8YWMWTT7T5KENB&language=en-US Main tool bag tools Veto tpxxl https://amzn.to/4kI5HPI Knipex cobra grips [---] https://amzn.to/3T8HHJP Knipex plier wrench [---] https://amzn.to/3SQNDY9 Wera jokers L https://amzn.to/4dEBbUI XL https://amzn.to/3HzjtG5 Xxl https://amzn.to/43paVdJ Radiator spigot https://amzn.to/3HiScrv Ridgid [--] in 1"
YouTube Link 2026-01-09T17:01Z 717K followers, 44K engagements
"Teflon Tape vs Liquid Teflon #asmr #howto #diy #foryou #hack #subscribe #youtubeshorts #tools In this asmr plumbing video Im showing how to make in radiator valves using Teflon tape or liquid Teflon Here in the uk we have straight threads which require you to use at least [--] wraps to get a seal Thats why using liquid can make the joint look much neater on nicely finished fixtures Let me how in the comments which you use and why If you liked this asmr plumbing video then please give it a like comment below if you would do anything different and please subscribe if you are new See you on the"
YouTube Link 2024-10-06T17:30Z 710K followers, 5M engagements
"How to replace a leaking isolating valve #asmr #diy #howto #plumbing #subscribe #youtubeshorts"
YouTube Link 2024-02-18T07:24Z 717K followers, 4.3M engagements
"How to plumb a discharge pipe like a pro #asmr #tools #howto #diy #plumbing #shorts #subscribe Welcome back to the channel on todays video I spotted this safety relief valve pipe sticking out the wall facing upwards. I have no idea why its facing upwards as insight. Theres two double beds so it mustve been done this way without spinning on the inside. I had to cut the fitting off as there is water left in the pipework. You cannot desolder pipes with water inside of them as it just creates steam so using the bandsaw from fein I can slice straight through drain the water and desolder. With the"
YouTube Link 2025-10-23T16:00Z 717K followers, 12.2M engagements
"How To Plumb Up Bath Taps Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes"
YouTube Link 2025-07-13T05:56Z 717K followers, 1.3M engagements
"How to bend perfect [--] degree sets in copper pipe #asmr #diy #tools #plumbing #shorts #subscribe In todays ASMR Plumbing video Im showing how to bend a set in [--] mm copper pipe using a formula with [--] x [--] degree bends on the monument pipe bender. What you need to do is work out the distance between you want the two pipes centre to centre or inside to outside and then times that number by [---] . Put your first mark where you want to start the Ben to be which is on the corner of this piece of wood and then draw the second mark with that measurement. On the Monument benders I put the hook at"
YouTube Link 2025-12-27T17:00Z 717K followers, 296.9K engagements
"I Found a Leak From Compression Fittings on Plastic Pipes Welcome back to the channel todays video Ive been caught out to a customers house because they got a leak coming through the ceiling as you can see there is just a bullet hole shaped hole which has been dripping so we need to find out what could be causing a leak Upstairs is a bathroom but everything has been tiled in with solid wooden floor with no signs of any of the bathroom fixtures leaking so what were gonna do is because there is a hole already. Im gonna fish a small camera up through the hole and hopefully we can see something"
YouTube Link 2026-01-16T17:00Z 717K followers, 47.2K engagements
"The best tool for tighten nuts in tight spaces #howto #diy #tools #plumbing #shorts #asmr #foryou In todays video Ive been sent out to change a toilet fill valve but the access was really tight After installing the valve I had to push the toilet back and connect up the flex line. There was not a lot of space to get a spanner in or basin wrench so I used the handy hand spanner from www.techersltd.com These hand spanners have got me out of so much trouble lately and I dont know how I would have done it without them They come in [--] different sizes1/2 and 3/4 so there great for them hard to reach"
YouTube Link 2025-12-02T17:00Z 717K followers, 1.3M engagements
"How to fix a leaking bath overflow #asmr #asmrsounds #tools #diy #plumbing #shorts #subscribe In todays ASMR Prime Video Im showing how to fix a leak on a bath overflow pipe that has fallen off. The best way and what I will be doing is to replace the bath waste for something with a better design as this doesnt have a O-ring keeping that flexible pipe attached but a simple way to stop it leaking so the customer can use the bath over the weekend was to add a bit of lsx sealant which is basically a silicon thats wras approved to use on plumbing fixtures. This is a quick simple things that can"
YouTube Link 2025-12-14T16:02Z 717K followers, 142.5K engagements
"LOTS of soldering just to install a water filter Welcome back to the channel and todays video. Ive got called out to a customers house because they want a new water filter fitted. This would normally be a fairly simple in store as long as you have space as the units are quite big and we are going to be installing it on a [--] mm pipe which comes up out the floor via a main stopped tap and what I want to do here is in store a bypass so if the filter ever went wrong we could bypass it and still leave the property with mains water. As Plumbing is Plumbing the leave valve above didnt want to shut"
YouTube Link 2025-12-23T17:00Z 717K followers, 29K engagements
"Plumbing new pipes for a dishwasher Welcome back to the channel on todays video. Ive been called up to a customers house because they want a new dishwasher fitted. The only problem is is that theres no Plumbing in the space where they want it and theyve only plumbed up for a single appliance underneath the kitchen sink So what youre gonna see me do in a video is adapt the plumbing underneath the kitchen sink to take two inlet hoses to the washing machine and the dishwasher and Im going to install a new trap to take both discharges and we have to run the discharge for the new dishwasher under"
YouTube Link 2025-12-26T17:00Z 717K followers, 30K engagements
"How to remove a radiator like a pro #asmr #howto #diy #foryou #shorts #subscribe #tools #plumbing In this asmr Plumbing video and showing how to remove a radiator like a pro Do you wanna start by isolating the valves and open up the air vent and make sure theres no water coming out That will tell you that the valves are holding . Once youre happy that the valves are holding you want to put a bucket or a container underneath the valves ready to catch the water in this video Im using derblaue system which has a folding bucket and a funnel which allows me to wrap it around the pipe and that will"
YouTube Link 2025-01-28T17:00Z 717K followers, 7.2M engagements
"Bending copper pipe over a pipe into press #asmr #subscribe #diy #howto #plumbing #bending #copper Asmr plumbing clip of me showing how I bend copper pipe over a pipe using a pipe bender. Im using the monument pipe bender as its so much better than the traditional ones as you can line everything up with the arms. This allows you to line everything easier getting the bends straighter. The benders are nice and compact and you dont need a former as its built into the bender. Hope you enjoy the clip and get practicing Asmr Plumbing asmr Pipe bending How to bend copper pipe copper pipe bending"
YouTube Link 2024-05-01T16:00Z 717K followers, 1.3M engagements
"How to fix a leaking radiator valve #howto #diy #plumbing #asmr #asmrsounds #shorts #subscribe Welcome back to the channel on todays video record to a customers house because they have a leak from a radiator pipe. This pipe is [--] mm thick and its crushed inside the valve because the pipe is too soft and the connection has been over tightened. To repair this leak in the best way possible Ive changed the valve to a [--] mm size and then cut the pipe and sold it a [--] mm to [--] mm long tailed Yorkshire reducer. This is the best way to connect tiny pipes as when youre connecting and tightening the"
YouTube Link 2025-10-16T06:00Z 717K followers, 377.3K engagements
"Smelly sink trap fix #asmr #asmrsounds #diy #plumbing #tools #shorts #subscribe #hack"
YouTube Link 2025-12-13T16:59Z 717K followers, 215.2K engagements
"While youre here can you fix my leaking toilet #asmr #diy #plumbing #fix #shorts #subscribe #tools Welcome back to the channel and todays video I got asked by a customer while youre here. Can you fix a leak on my toilet No I didnt have the part on my van as I wasnt sent there to fix it so I did the next best thing and that was to apply some sealant where the connection from the connector is to the pipe. If I was sent to fix this leak I would normally bring a spare connector with a brand-new seal but if the customer wants me to look at it on the spot then I will fix it on the spot How to DIY"
YouTube Link 2025-12-11T17:10Z 717K followers, 133.9K engagements
"The correct way to connect a flexi to isolation valve How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr"
YouTube Link 2025-12-28T17:00Z 717K followers, 1.2M engagements
"How to change a toilet isolation and fill valve like a pro #asmr #diy #plumbing #shorts #subscribe Welcome back to the channel in todays ASMR Plumbing video. Ive been caught out to a customers house because the toilet fill valve isnt working and they want it replaced and the isolation valve feeding the toilet doesnt shut off properly. After loosening the isolation valve and removing the nut and olive with my cutter I can put a new isolation valve which has full flow and a handle so the customer can turn off themselves without using a tool to fill valve is replaced with a brass shank style so"
YouTube Link 2025-12-20T17:00Z 717K followers, 139.6K engagements
"How to fix a radiator not getting hot Check the valve and give it a tap #plumbing #diy #howto"
YouTube Link 2023-10-30T14:13Z 717K followers, 424.2K engagements
"Every Plumber Needs These Spanners Welcome back to the channel on todays video. Ive got a brand-new product to show you from Heatlab and myself. Ive helped design the spanners in collaboration with a company called heatlab they make lots of core plumbing tools and was a perfect fit to be able to get these types of spanners made. In the pack is two spanners we have a [--] mm for [--] mm compression fittings and also a [--] mm for [--] mm pipe fittings . The reason why Ive decided to go with two separate sizes is that these are the most common sizes that you find in a domestic industry. Its [--] times"
YouTube Link 2025-12-16T17:00Z 717K followers, 29.7K engagements
"These Pipe Clips Make Your Life EASY Welcome back to the channel todays video is all about ecoclips. These are the best clips available I think especially for engineers theyre made from recyclable plastic which is obviously good for the environment. They come in two colours white and black and also sizes of 28mm 22mm and 15mm. You can buy them in separate boxes so a whole box of each size and you can also buy a whole box of the rail clipping system which allows you to clip the clips into place in bands of four or you can simply snap off the ones that you dont need And either use them singly"
YouTube Link 2026-01-13T17:00Z 717K followers, 11.8K engagements
"How to replace a bathroom sink waste #asmr #subscribe #diy #youtubeshorts #howto #plumbing #tools Asmr plumbing video replacing a bathroom sink waste. The mechanism has gone so it was swapped to a clicker waste. The old waste was made in with so much silicone it took a while to get the nut down the threads Cutting the silicone out using the toughbuilt scraper which makes a perfect plumbing tool for cleaning silicone and scraping the old off After cleaning the new waste went in with a basin mait washer system under which uses a huge rubber washer These work great and its very clean and does"
YouTube Link 2024-04-29T16:00Z 717K followers, 3.3M engagements
"Changing a sink tap using the best tools #asmr #tools #diy #plumbing #shorts #subscribe #plumber Changing a bathroom sink tap using a hand spanner from Techersltd a t handle ratchet from Wera and some parts from Nerrad tapped kit connected with a Deen square drive to hex Atlas46 tool roll www.atlas46.com Techersltd hand spanner https://www.techersltd.com/store/p/flexi-hose-tap-tightening-spanners Wera t handle ratchet: https://amzn.to/4qDPaPO Nerrad tappex kit https://amzn.to/453spN2 How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber"
YouTube Link 2026-01-10T07:37Z 717K followers, 214.8K engagements
"Plumbing one of the rarest outside taps #asmr #admrsounds #plumbing #shorts #subscribe #tools Welcome back to the channel on todays video Im gonna be installing one of the worlds most expensive and rarest outside taps but you can get on the market. This outside garden tap must be some sort of collaboration with Mickey Mouse and Im going to be installing it at my Nans house who is a big Disney fan and as soon as I saw that this was available I had to buy it for her for her garden Never gonna have to alter the back plate that it fixes to as this tap is from America and is a three-quarter thread"
YouTube Link 2025-12-05T17:01Z 717K followers, 13.2M engagements
"These fittings are easily mistaken for press In todays ASMR Plumbing video Im showing a copper fitting which often gets mistaken by a press copper fitting with rubber earrings on the inside and the fittings that I use have sold a preloaded they are called Yorkshire solder ring fittings How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing tutorial Hack Plumbing hack Satisfying video Satisfying asmr How to DIY Plumbing ASMR ASMR sounds Foryou Best tools for a plumber Tools a plumber uses Mmplumber Mmplumber video Plumbing"
YouTube Link 2026-01-18T16:58Z 717K followers, 795.1K engagements
"Upgrading a flexi pipe to hard chrome pipe #howto #diy #craft #shorts #subscribe #asmr #tools Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes"
YouTube Link 2025-06-14T13:00Z 717K followers, 18M engagements
"How to press copper pipe in tight angles #asmr #subscribe #howto #diy #youtubeshorts #asmrsounds In this asmr plumbing video I am using pressfit on this job but I cant fit the jaws on the fitting as its tight for space Thankfully novopress make some angled jaws for the gun to help get into tight areas. This is due to having full [---] degrees on the jaws as well being able to spin the collar to your desired position. Im really glad innovation has come to the plumbing industry to help us out on the job site. For such long time plumbing has been hard work but now the new tech is making it more"
YouTube Link 2024-05-26T16:00Z 717K followers, 8.1M engagements
"How to silicone a toilet like a pro #asmr #subscribe #diy #youtubeshorts #howto #plumbing #tools Plumbing asmr video clip on me siliconing the bottom of the toilet We do this to help finish the toilet ceramics to the floor for a clean look and it helps stick the toilet to the floor in position Im using xpro bathroom sealant in this clip and using the Cramer silicone profile tools it makes light work getting that crisp benched finish. The solution in the bottle sprayer is a drop of fairy washing up liquid and water. The more practice you have the better you get and the least product you will"
YouTube Link 2024-04-30T16:00Z 717K followers, 507.2K engagements
"Professional Plumbing Tool Bag Every Tool I Use Every Day In this video I show all the tools I carry every day in my plumbing tool bag and explain why each one earns its place. This is my real working setup that I use on domestic and commercial plumbing jobs across the UK. From hand tools and adjustable spanners to pipe cutters grips and everyday essentials this video gives you a full walkthrough of a professional plumbers tool bag. Whether youre a qualified plumber an apprentice or just interested in trade tools this video gives a clear look at whats actually used on the job. I talk through"
YouTube Link 2026-01-04T21:01Z 717K followers, 20.3K engagements
"How to change a outside tap LIVE #subscribe #copperpipe #diy #plumbingpipes #plumbing"
YouTube Link 2023-06-22T17:50Z 717K followers, 38.4K engagements
"How to bend copper pipe in place #asmr #howto #diy #foryou #tools #shorts #subscribe #hack #plumber In this ASMR Plumbing video Im showing how to bend copper pipe in place using the Monument benders. This ASMR Plumbing hack is really good if youve got pipework dropping vertical or even horizontal and you want to bend it without using an extra fitting. The Monument benders sit flat against the wall which allows you to be able to bend in place very easily and very accurately. When bending copper pipe all you need to do is learn all the tricks and tips while using your bender. This will make you"
YouTube Link 2024-12-04T17:00Z 717K followers, 9.9M engagements
"How to change a radiator valve #asmr #howto #diy #foryou #subscribe #shorts #tools #asmrsounds In this ASMR Plumbing video Ive been called out to a leaking radiator valve which has to be replaced so obviously start off by isolating the system and then youre free to open up the nuts and olives to release the water. Just make sure that you catch it in a bucket. Obviously I like to use my buckets from Derblaue this bucket its perfect height to fit underneath radiators allowing me to catch all the water I needed and still giving me plenty of room to get on with the job Thermostat radiator valves"
YouTube Link 2025-01-09T17:00Z 717K followers, 540.6K engagements
"Wera Joker Spanners Which size fits what These are the Wera joker spanners and Im gonna show you exactly which sizes I carry and what are use them for. The Spanish youve seen me using all my videos they are a self setting and also a ratchet spanner. The main reason why I really like him is that I hate adjustable spanners because you were just to the correct measurement of your nut and when you put it on and pull it back off again its already moved as theres too much play and slop in the mechanism I understand that they compact and really good because you can Adjust to different sizes but for"
YouTube Link 2025-05-27T16:01Z 717K followers, 41.9K engagements
"Bending copper pipe to replace a toilet flexible hose #asmr #shorts #diy #plumber #subscribe #tools In todays ASMR Plumbing video Im showing how to replace a toilet flexible hose with copper pipe. after removing the old flexible line they installed a new isolation valve for the customer to be able to turn off the water if they needed to and to get from that to the old valve I need to bend a piece of copper pipe. Using the Monument pipe benders I start off by bending two small sets as that can get me close together and then continue to bend each side to the desired length I find is one of the"
YouTube Link 2025-12-26T07:17Z 717K followers, 456.2K engagements
"How to mark cut and solder a radiator valve #asmr #diy #plumbing #olumber #tools #shorts #subscribe In todays asmr plumbing video Im showing my process to plumbing a radiator valve onto copper pipes coming out a wall. Im using a huepar laser to get the measurements perfect where it needs to cut. To solder the pipe and fittings a good clean is necessary for the perfect soldered joint. Flux is then added followed by the fitting which is a Yorkshire soldered fitting with solder pre loaded into the raised ridge. I always dab a bit of solder to help the fitting flow as you saw as soon as I added"
YouTube Link 2025-12-22T17:01Z 717K followers, 97.1K engagements
"New builds most common leak Welcome back to the channel and todays video. Ive been called out to a customers house because they have a leak coming from the Bath every single time that they have a shower. This house is a new build and I do come to these jobs more frequently. The new builds seem to be thrown up super fast and the attention to detail which should be basic is lacking and after a few years things decide to give up the ghost. I start by spraying down the areas with the shower and nine times out of [--] leaks on baths is to do with the sealant for some reason they always seem to have"
YouTube Link 2025-12-30T17:01Z 717K followers, 52.2K engagements
"How to bend copper pipe #plumbing #subscribe #diy #youtubeshorts"
YouTube Link 2023-08-13T12:16Z 717K followers, 316.6K engagements
"Milwaukee rapter pipe cutter 15-28mm #asmr #subscribe #diy #howto #youtubeshorts #tools #asmrsounds Cutting 28mm copper can be hard and slow but using the Milwaukee raptor pipe cutter makes light work of 15mm pipe to 28mm. The raptor uses m12 batteries so its nice and light with a very comfortable feel one handed. The raptor has a led light and sight gauge so you can see your marks on the pipe before you push the trigger How to cut copper pipe Milwaukee rapter Milwaukee m12 pipe cutter Automatic pipe cutter Copper pipe cutter Cutting copper pipework How to cut copper pipework Milwaukee rapter"
YouTube Link 2024-06-06T16:00Z 717K followers, 2.8M engagements
"How to extend radiator valve tails Pipework too short #howto #diy #asmr #subscribe #youtubeshorts In this asmr plumbing video I am extending radiator valve tails as the first fix pipework is not coming out the wall in the right place The one right hand side is already connected using the lock shield valve with drain as this isnt extendable. So with this side fixed and connected Im extending the thermostat side as I can fit a longer tail to make up the distance. This saves time and money moving the pipe in the wall to the correct place and still looks good with not too much being extended."
YouTube Link 2024-08-25T06:00Z 717K followers, 6.8M engagements
"Using the best tools to replace a tap and alter pipes Welcome back to the channel on todays video. I got caught out to a customers house to swap out their kitchen sink up and to be able to swap it. Some pipework alterations have to be done so Ive used the best tools available to change the tap and alter the Plumbing. Ive recently got a new tool which is the bigidesign bit bar [--] which is a very cool bit holder that you can use the bits in the end as a screwdriver I love the titanium tools so it was good to show it off. Changing a tap is super easy using specific tools especially the Nerrad"
YouTube Link 2026-01-14T17:00Z 717K followers, 259.1K engagements
"How to make a diy copper tap #asmr #howto #diy #plumbing #subscribe #shorts #tools #foryou In this ASMR Plumbing video Im showing how to make your own DIY custom tap made out of copper and fittings. Customer request requested for me to make my own copper tap and I decided to use some press fittings as I think these look a bit more steampunk as they are a little bit bigger and chunky rather than the small solder fittings. I started off in certain some stem pipes which are mainly used for wall plates on outside taps as they have a female thread with a solid piece of copper pipe attached to"
YouTube Link 2025-05-10T06:00Z 717K followers, 2.1M engagements
"Turning a pipework shamble into a copper masterpiece Welcome back to the channel in todays video. Ive got caught out to a customers house to replace their radiator with a towel rail. This is normally a good choice as normal radiators tend to rust in high moisture rooms such as a bathroom. The pipework is currently fed in [--] mm and it comes from underneath the shower tray which is going to be a bit of a pickle to adapt as I like to always re-pipe in copper but I plan to cut the pipes underneath and rejoin them and bring new pipes along the top of the skirting and bend into our new towel rail."
YouTube Link 2026-02-13T17:01Z 717K followers, 20.6K engagements
"How to fix a stuck bath waste #asmr #plumbing #diy #tools #shorts #subscribe #howto #plumber In todays ASMR Plumbing video I got caught out to a customers house because their Bath waste was stuck shut. These waste kits are a nightmare and theyre overflow connection is terrible so Ive decided to redo the whole kit and these come with a nice big rubber so I dont have to worry about trying to silicon them in. The easiest way to get the old ones out is to hold a nut with a para grips and using a screwdriver get through into the grooves and slots from above and twist it. After fitting a new waist"
YouTube Link 2025-12-31T08:12Z 717K followers, 106.3K engagements
"How to plumb up a Kitchen sink waste #asmr #diy #howto #plumbing #kitchen #subscribe #youtubeshorts How to plumb up a kitchen sink asmr plumbing I made all my kitchen sink wastes in with plumbers mait as its clean fast and no wastage. Pitching the waste pipes with the Milwaukee hackzall and using the deburrer tool from monument for that perfect finish. This macalpine waste kit is so easy to fit and worked out perfectly for me with no additional waste fittings How to plumb a kitchen Kitchen plumbing Kitchen sink plumbing Asmr Asmr plumbing Plumbing asmr How to plumb a kitchen sink unit Waste"
YouTube Link 2024-03-16T12:10Z 717K followers, 5.2M engagements
"This plumbing is terrible Welcome back to the channel on todays video. Ive been called out to a customers house who has some plumbing issues that theyre worried about. We have a waste pipe which is attached to flexible connections and its pulled to the trap down lower so thats ready to pop off and those flexible connections have allowed it to drop. The plumbing of the hot and cold to the taps inside the sink unit look like its been done by a complete DIY or landlord to me as the joints are covered in PTFE type there is so many different joints copper brass and plastic and we have some valves"
YouTube Link 2025-09-05T16:00Z 717K followers, 159.6K engagements
"How to fit a bypass valve on pipework #asmr #diy #howto #plumbing #plumber #youtubeshorts Asmr video of Fitting a bypass valve on some heating pipework. This is fitted so if the zone valves close the pump and still circulate around the system to prevent damage. I used a clever coupler union fitting to replace nuts and olives so I can slide the valve back out if needed to in future. All soldered fitting and will last a very long time. Looks nice all shined up as well. Thanks for watching Asmr plumbing Asmr tools How to fit a bypass Bypass fitting Soldering pipe Soldering fittings Fit pipework"
YouTube Link 2024-02-17T07:23Z 717K followers, 732.3K engagements
"Plumbing hack everyone should know Welcome back to the channel on todays video we got two taps to sort out one is constantly running and the other ones flexible hoses look like theyre about to burst. Im also gonna show you the best Plumbing hack that every plumber should know and that is installing your taps with the hardware already attached which can save you some FAF and hassle of losing the hardware down the back of the units and this trick can be used on kitchen taps and also some basins. The tools that I use to fit my tabs are from Nerrad this is the tappex kit what I really like about"
YouTube Link 2025-08-22T16:00Z 717K followers, 210.8K engagements
"Fixing lots of plumbing jobs Welcome back to the channel on todays video. Ive got a few jobs that I need to sort out so I thought I would put them all into one video. I work every day as a maintenance job and plumber so I find myself going from job to job which normally between one and two hours max I work pretty close to where I live so Im in a tight little area and Im just trying to help the local communities out with the Plumbing problems. I find this way of work works for me and I can make almost the same amount or even more money as people fit in boilers with a lot less stress. So in"
YouTube Link 2025-11-28T17:00Z 717K followers, 34.6K engagements
"How to install a kitchen tap from the top #plumbing #diy #subscribe"
YouTube Link 2023-08-11T16:12Z 717K followers, 534.6K engagements
"King Of Spanners Wera joker XXL #howto #diy #plumbing #asmr #subscribe #youtubeshorts #plumber New to me the joker spanners Ive been using over the last week and I have to say I have been loving them Self setting spanners that lock onto the nuts and allow a slip action replicating a watching effect. The wera joker spanners I use are the XL version which is 19-24mm for 15mm nuts. And the XXL big daddy which does both [--] and 22mm compression nuts Really really nice using tools from wera King of spanners New spanner Wera joker Wera joker spanner Wera ratcheting spanner Ratcheting spanner"
YouTube Link 2024-02-05T06:35Z 717K followers, 2.4M engagements
"Burst flexible hose Changing a valve LIVE Welcome on todays video I got called out to a pub because they had a flood caused by a burst flexible hose. These hoses have a rubber internals with a braid on the outside protecting it but once that becomes rusted they can fry and puncture on the inside which has caused this to rupture and flood The plan of attack is to change the isolator to one that I normally use which is like a butterfly handled leave a valve. This is much better than whats been installed as somebody before has installed a service valve with a flexible house connecting it. A"
YouTube Link 2025-12-12T17:00Z 717K followers, 41.2K engagements
"Huepar China Tool Trip Vlog Welcome back to the channel todays video something a little bit different where Ive flogged my trip to China and Hong Kong with the company huepar. The company brought a few of us out to check out their HQ their company and also experience some Chinese culture. We spent four days in China and then we moved to Hong Kong for two days and got to have a little look round and see what we could find. Ive tried to make this video more Plumbing related so you might see some clips with toilet and pipes as well as inside the factory and experiencing some Chinese locations."
YouTube Link 2026-01-10T16:00Z 717K followers, 10.7K engagements
"Changing a tap in tight space #asmr #diy #plumbing #plumber #shorts #subscribe #tools asmrsounds In todays ASMR Plumbing video I got caught out to a customers house because they wanted a new kitchen sink tap space underneath isnt great as theres pipes everywhere at all different heights and there is only a specific place where I could cut some new isolation valves to be able to shut off the tap easily To remove the tap are used some various to parts of tools to make up my setups we have parts from the Nerrad tap X kit a ratchet driver from Deen which turns on the handle too aswell as"
YouTube Link 2025-12-21T07:30Z 717K followers, 74.7K engagements
"How to plumb a new sink waste #howto #diy #asmr #subscribe #shorts #tips #foryou #plumbing #tools In this ASMR Plumbing video Im showing how to install and fit a new basin waste. The rubbers and seals that come with the basin I dont think are sufficient for the job sometimes the casting and the mouldings of a basin dont allow the way to sit nicely especially on the top which is why I normally use silicone or putty if the washer is no good. For the end side there is a big gap left all the way around the outside of the waist. I like to fill this gap up using more silicon as this is actually a"
YouTube Link 2025-03-03T07:00Z 717K followers, 9.2M engagements
"Testing thread sealer for plumbing valves which do you use #diy #plumbing #howto #diy #subscribe"
YouTube Link 2023-10-16T19:32Z 717K followers, 1.2M engagements
"Cold Radiator But Pipes Are Hot Fix It FAST In todays video Ive been caught up to a customers house because their radiator isnt working. All the other radiators are hot and the heating is on and the pipework gets hot but it doesnt flow through the radiator. So in this video Im gonna show you a simple tip how to get the radiator working and Ill be proving it to you using a thermal imaging camera . Nine times out of [--] the problem is the thermostat and as you can see on the camera the pipework is hot up to the valves but its not flowing through. The first thing to check is the pin underneath"
YouTube Link 2026-01-06T17:24Z 717K followers, 10.3K engagements
"The best plumbing hack with taps #asmr #hack #howto #diy #learn #subscribe #youtubeshorts The best kitchen sink hack is the fit the hardware first to the tap and using the horse shoe type you can slide it into the sink in place to avoid looking the hardware if tight place to get to Have we been fitting taps wrong for all this time without realising why they was shaped this way This works on all stainless and thin basin ceramic sinks. Try this plumbing hack next time when installing a tap on your next job Dont forget to like subscribe and comment below if you knew you could do this Kitchen"
YouTube Link 2024-08-06T05:40Z 717K followers, 78.1M engagements
"How to install a shower valve from the room behind #howto #diy #plumbing #asmr #subscribe #plumber"
YouTube Link 2024-01-19T06:32Z 717K followers, 22.6M engagements
"How to bend copper pipe Full cross over #copper #plumbing #subscribe Little quick video on how to bend a full cross over in 15mm pipe fast and effectively with no measuring. Remember less is more here Monument 15mm benders used here with copper pipe from Lawton tubes. Asmr Plumbing Tool bag Pipes Tools Hand tools DIY How to Copper Soldering Press tool Asmr Plumbing Tool bag Pipes Tools Hand tools DIY How to Copper Soldering Press tool"
YouTube Link 2023-05-18T20:40Z 717K followers, 46.8K engagements
"The only screwdriver you will need #subscribe #wera #screwdriver #tools #youtubeshorts"
YouTube Link 2023-06-23T18:06Z 717K followers, 118.2K engagements
"Using every plumbing skill on one job In this job Im first fixing a shower valve for [--] jets a hand held sprayer and a fixed head Thats [--] outlets on a shower This install was done in full copper with brass valve and using every plumbing skill in one Job Soldering the backplates pressing the copper fittings and pipe bending to the max [--] degree bends full cross bends to get the job done Sit back and watch me with some asmr plumbing sounds getting this job sorted. Let me know if you would have done anything different Soldering copper pipe Bending copper pipe Pipe bending Copper pipe Pressfit Pro"
YouTube Link 2024-04-10T18:37Z 717K followers, 2.9M engagements
"This Wera hallow nut driver is perfect for toilets #asmr #tools #diy #plumbing #subscribe #shorts Welcome back to the channel on todays ASMR Plumbing video. Im showing myself making up some toilet cistern tank bolts being made in. My go to method is to use the rubbers on the inside and in some packs you dont get a double rubber washer the coned ones are the best so what I like to do is fill the gap on the underside with silicon and that keeps the bolts from moving if the rubber reacts with the water or there is imperfections in the China casting. The bolts normally come with a [--] mm nut and"
YouTube Link 2025-12-17T17:01Z 717K followers, 887K engagements
"The best way to connect flexible hoses to valves #asmr #asmrsounds #diy #howto #subscribe #tools Connecting up flexible hoses to valves has always been a talking point amongst tradesmen and diyers. The most seen way is to connect the flexible hoses straight to the valves. People think this okay and some get no leaks doing so. The flexible hose with rubber washer is designed to sit onto a flat face with as big of surface area as possible. The valves are bevelled which leaks a very small surface area to come contact with. some people use radiator tails they have spare lying about which is a"
YouTube Link 2024-08-01T16:00Z 713K followers, 265.2K engagements
"Using my best tools to repipe a kitchen sink Welcome back to the channel in todays ASMR Plumbing video. Ive decided to post this video as a long format but in portrait as its fairly long and I didnt feel that speeding it up did it justice. This video is all about me replacing all the copper pipes inside a kitchen sink unit and replacing a kitchen sink tap thats been dripping installing a limescale Aquabion filter and tidying up all the pipework with new isolation valves. Im using a vast amount of tools which are the best in my opinion. We have press tools from Ridgid lasers from huepar press"
YouTube Link 2025-09-20T16:00Z 712K followers, 294.3K engagements
"Ive not seen any plumber do this before Welcome back to the channel on todays video I got called out to a customers house who has a leaking filling loop isolation valve. Everytime they pressurise the heating the valve leaks out Upon inspection of the heating expansion vessel it feels full of water and seems very heavy. So in this video Im going to show you how to replace the vessel safely and easily as these can be ridiculously heavy and Ill be swapping out the factory combination section to fit my own isolation valves pressure relief and filling loop. With the cold water boiler and heating"
YouTube Link 2026-01-23T17:00Z 717K followers, 31.4K engagements
"Where Is This Leak Coming From Welcome back to the channel in todays Plumbing video. Ive got called out to a customers house because they had a leak and a damp patch on their ceiling. Above this room is a bathroom so I gave it a good inspection to see if there was anything leaking on surface but there was no signs of anything here also this room doesnt quite lineup with the leak patch underneath so I looked in the room that was more in line with the damp patch and there was a boxing in the corner now even the carpet had some staining and was also damp as you can tell from the skirting board"
YouTube Link 2026-01-30T17:00Z 717K followers, 25.8K engagements
"I didnt expect this flux to be the best Welcome back to the channel on todays video were gonna be testing out which flux is the best for soldering copper pipe. We got four different types of flux to try out. We have the fluxuator with its pre-filled flux. Laco normally used for many years. power flux and also ever flux. Ive used three out of four of these products before I never used power flux which I know a lot of plumbers swear by. Ive got four bits of pipe with teas and some elbows in a configuration so we can solder some sockets on the verticals. They should give a fair test as the heat"
YouTube Link 2025-08-26T16:00Z 714K followers, 14.1K engagements
"Fixing a leaking toilet with all new parts In todays ASMR Plumbing video I was called out to a customers house to fix their toilet toilets that was constantly running. Because this toilet had some cheap parts inside I decided to give it a whole makeover with installing a new Phil valve and a siphon. The toilet connector was a flexible house which didnt look too great so I decided to re-pipe it all in copper and that should give it the maximum life as possible. this toilet had an isolator already coming out the floor and I was happy to leave it in place as it wasnt leaking when I turned it"
YouTube Link 2026-02-01T08:13Z 717K followers, 15.5K engagements
"How to fix a dripping kitchen tap Welcome back to the channel on todays video. Im gonna show you how to fix a dripping kitchen sink tap. The noise coming from constant drips is enough to make you go crazy and fixing a leaking tap isnt as hard as you may think you do need to source the right part but that is generally the hardest part. The first thing you need to do is isolate the water going into the tap a quick test is obviously turning the taps on and making sure you have no more water coming out. With the water is isolated because this tap is a turn it uses ceramic cartridges on the inside"
YouTube Link 2026-01-20T17:01Z 717K followers, 29.8K engagements
"How to fix a leaking radiator valve #howto #diy #asmr #asmrsounds #tools #shorts #subscribe foryou Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes Tips and tricks How to DIY shorts ASMR Plumber Plumbing DIY plumbing DIY plumbing video YouTube Shorts Subscribe Mmplumber Mmplumber video Best tools for a plumber Plumbers best tools Learn plumbing How to connect pipes"
YouTube Link 2025-08-06T05:51Z 713K followers, 70.5K engagements
"How to change a pair of basin taps #asmr #howto #plumbing #subscribe #youtubeshorts #tools #plumber Asmr plumbing video on how to change a pair of basin taps. This is the old school way without cutting pipes or adding a flexi hose Simply shut off the water and open the taps downstairs or lower to drain the water out the pipe line. Remove the old tap and washer and fit new with plastic top hat washer. This spreads the load easier and tightens the tap firmer. Im using the todays tools tap kit which makes things super easy"
YouTube Link 2024-04-06T16:00Z 713K followers, 367.5K engagements
"HOW To install a radiator valve on pipe #howto #diy #plumbing #subscribe #youtubeshorts #asmr Simple video showing how to fit a new valve and onto copper tails out of wall. Using a laser level from Huepar as I had it to mark [--] radiators in the room. So much easier if you havent used a laser level you must try it out It always comes out now. More than the normal level. Soldering copper pipe using lead free solder with laco fix 👌"
YouTube Link 2024-01-11T06:13Z 712K followers, 3.1M engagements
"How to install a under sink tap filter #howto #diy #foryou #asmr #subscribe #shorts #tools #tips In todays ASMR Plumbing video is how to fit an under sink tap filter to make your water taste better. Ive got caught up to the job because the customer wanted a new filter fitted underneath their sink to make the water taste better and the unit Im fit in today is one from a company called water drop this water filter filters out chemicals and metals that can be absorbed in your water. The most common bad taste for water is chlorine and this filter also helps remove that. Micro plastics is a really"
YouTube Link 2025-04-15T16:01Z 712K followers, 2.9M engagements
"How to change a leaking radiator valve #asmr #howto #diy #plumbing #video #foryou #tools #tips In this ASMR Plumbing video Im showing how to fix a leaking radiator valve On this job I got called out because when the customer turns the radiator valve on and off it causes the valve to leak The first thing to do is to switch the boiler off and drain a little bit of pressure out of the heating system from a drain point which is normally from a radiator below. Whats the pressure has been dropped open up the radiator air vent to drain the water out of the system and the radiator your working on."
YouTube Link 2025-04-19T06:00Z 712K followers, 55.5K engagements
"Perfect tool for radiators Vent plugs and radiator valves #howto #plumbing #diy #subscribe #asmr"
YouTube Link 2023-12-18T06:09Z 712K followers, 415.8K engagements
"How to drain the radiator system with no drain #asmr #howto #shorts #subscribe #tips #diy #plumbing In this ASMR prime video Im showing how to drain your heating system down without a drain point. So normally on a radiators there is one with a set of valves with a drain point or one cut into the pipework. If you have external pipes on his heating system there was nothing even the boiler didnt have a drain point underneath and I needed to work on a radiator above. The easiest way youre doing so is to shut off the radiator valves that isolates the water flow going into it you can open up the"
YouTube Link 2025-03-04T07:10Z 715K followers, 285.7K engagements
"How to install a vanity sink unit Welcome back to the channel and todays video. Ive got called out to a customers house because their bathroom sink was about to fall off the wall. After talking to the customer we decided that changing the sink for a volunteer unit would be beneficial as this is no longer requires to be fixed just on the wall it has support because its weight is on the floor. Vanity units are great options in bathrooms as youve got more storage and hopefully the Plumbing should be straightforward and come through the back of the unit exactly where we need it. Start by removing"
YouTube Link 2026-02-06T17:00Z 717K followers, 21.9K engagements
"Why I choose this pipe bender Welcome back to the channel on todays video were gonna be talking all about my favourite pipe bender from Monument tools. Despite youve seen a lot in all my videos and I thought in this video I would explain exactly the reason why. they make two separate sizes in this pipe bender one is [--] mm and the other is [--]. If you live outside the UK then these benders might not fit your pipe size as you could have measurements in inches when this one is designed and made in the UK for our pipe sizes in millimetres . what I really like about this bender is that the [--] mm"
YouTube Link 2025-10-15T16:07Z 715K followers, [----] engagements
"Plastic push fit fitting blew off pipe #asmr #diy #plumbing #fix #shorts #subscribe #foryou #tools In todays ASMR Plumbing video I got called out to a customers house because they had a leak and I found that a pipe had just blew off out of a plastic push fit fitting The fittings that were used on the best quality so I decided to patch it back up using some of the best push fit fittings available in the UK which are from hep2o"
YouTube Link 2026-01-08T17:00Z 717K followers, 82.7K engagements
"The Ultimate Copper Pipe Bending #asmr #diy #howto #foryou #learn #subscribe #youtubeshorts #tools In this asmr plumbing video Im bending copper pipe into a full coil using the moment pipe benders which as you know are my favourite benders to use The job Im doing is replacing a flexi braided hose on a filling loop and replacing with a copper coil bent out of 15mm. This is really testing the strength and technicality of the monument pipe bender and copper pipe itself. Using some clever techniques and some practice Im able to pull a really tight loop consistently into a coil shape. Let me know"
YouTube Link 2024-10-10T16:30Z 715K followers, 204.3K engagements
"Installing a horse outside tap at a stables In todays asmr plumbing video I was asked to fit a new outside tap at a horse stables but this time to fit a tap in the form of a horse its self I really like these themed taps and trying to match the surroundings. I would have cut it out to make it look better but they drilled a really big hole to fit the plastic fitting in which I know I wouldnt get a fixing if I swapped it for a copper stem pipe and wall plate The amount of ptfe or Teflon wraps is normal in the uk as our threads are so loose As you saw even after 14-19 wraps it still flew in hand"
YouTube Link 2026-01-21T17:01Z 717K followers, 372.8K engagements
"How to fix a hole in copper pipe #asmr #asmrsounds #howto #diy #shorts #subscribe #youtubeshorts In todays ASMR Plumbing video Im showing how to fix a hole in a copper pipe so if somebody has put a screw or accidentally drilled a copper pipe Im gonna show you another option instead of cutting it all the way through and putting a join in This fitting snapped over the top of the copper pipe so you need to make sure that it is cleaned appropriately and fluxed. The fitting is pre-loaded with soda as this is a Yorkshire type soldering fitting and all you need to do is heat up with a blow up and as"
YouTube Link 2025-09-25T16:01Z 715K followers, 2.1M engagements
"How to put a radiator back on the wall after decorating Welcome back to the channel on todays video. Im gonna show you how to fit a radiator back on the wall especially after decorating. So if youve already took the radiator off so you can paint and do any finishing or touch them up Work on the wall behind then obviously this is the video to show you how to put it back on again fill the heating system back up add some inhibitor and test for leaks. In a previous video which are linked down below I showed you how to remove the radiator so we should have valves that are in a opposition what you"
YouTube Link 2026-01-27T17:01Z 717K followers, 12.7K engagements
"Which Paste Is The Best Welcome back to the channel todays video is all about joining compound. You might see me use this in my videos especially on compression fittings as this lubricates the seal so it can mould to shape perfectly without any friction. It also adds a waterproof layer which can take up any imperfections on the pipe or even on the face of the valve or fitting youre connecting onto. The first compound is called lsx from fernox. This comes in a tube and has a consistency and look close to silicone. This dries in a rubbery substance which is fully waterproof and you can even use"
YouTube Link 2026-02-03T17:01Z 717K followers, 11.7K engagements
"Day in the life of a plumber Fixing leaks Welcome back to the channel on todays video we have a few jobs to sort out. The first job Ive been called out is a constantly overflowing toilet so as you can see the toilet is constantly running and that is because the ball valve isnt even attached so the customer has got pretty lucky here as it couldve been spraying and overflowing causing a flood. Because the toilet side go all the way back to the wall were gonna have to isolate the water. Pour the toilet out and try to gain access as I dont wanna pull it out too far and disturb too many joints."
YouTube Link 2025-07-18T16:00Z 706K followers, 48.6K engagements
"How to remove and install new sink with silicone #asmr #howto #asmrsounds #tools #subscribe #shorts"
YouTube Link 2025-09-03T16:00Z 707K followers, 7M engagements
"Plumbing up an electric shower like a pro #asmr #asmrsounds #howto #diy #plumbing #shorts #tools Welcome back to the channel in todays ASMR prime video. Ive been called out to a customers house to replace their electric shower. first thing first is to isolate the water and isolate. The electrics. Electrics is normally on the mains consumer unit and the cold water. I turned off the main stop tap feeding the house. But the supply feeds turned off I opened up some taps and started to de-wire and disconnect the plumbing connection onto the shower. Once disconnected we can remove it from the wall"
YouTube Link 2025-10-27T17:00Z 705K followers, 769.3K engagements
"Why I use these copper fittings Welcome back to the channel on todays video I thought I would explain the reason why I pick these Yorkshire solder ring fittings over the traditional endfeed. These fittings are preloaded with soda inside the ridge. There is enough in this ridge to fully cover inside the fitting and the pipe although I do have a habit of dabbing a little bit more thats what I dont want to happen is that that so I can pull out and leave a void behind and also sometimes a little dab of soda helps it run properly. Yorkshire fittings are commonly misinterpreted for viega press"
YouTube Link 2025-10-28T17:00Z 678K followers, 14.1K engagements
"The Best Pipe Bending Hack In this plumbing video Im showing how to bend copper pipe into a perfect set every time to a desired distance. In this video Im using the monument pipe benders which is my favourite as you know. The benders have some markers on them at [--] [--] [--] and [--]. To bend using the formula you have to work out your desired gap distance from center to center and times that number by [---] and you bend at that distance on both bends starting at the end of the arm at the [--] mark. Using this formula is a very good technique that can help you out on lots of occasions on the job. Its"
YouTube Link 2024-10-22T17:33Z 700K followers, 50.5K engagements
"How to stop a tap from dripping #asmr #asmrsounds #diy #plumbing #tools #shorts #subscribe #foryou In this video Im showing how to service a tap to stop it from dripping"
YouTube Link 2025-11-19T17:00Z 688K followers, 94.9K engagements
"This is My Press Setup Welcome back to the channel and todays video is all about press so what I wanted to do was explain exactly what I carry in my press back the fittings that I use and also my press gun that I choose to press with. The bag is from an American company called Atlas [--] which is the pipe vise bag. The reason why I really like this is that its flat and what I mean by that is that is a horizontal bag that opens up through the middle and its made of canvas which makes it extra light as you know some tool bags can be extremely heavy and these bags are extremely well-made but a"
YouTube Link 2025-11-11T17:00Z 681K followers, [----] engagements
"The best tool for fixing taps #howto #diy #asmrsounds #asmr foryou #shorts #subscribe #tools In this asmr plumbing video Im showing one of the best tool kits for changing and tightening up taps Some taps require you to get totally under the sink to be able to access the tightening but but using a kit like this Nerrad tapex extension kit allows you to do it without looking. Most plumbing jobs are done without looking as access is so bad and you have to rely on touch. I really like this kit as it keeps everything nicely organised and has really long sockets to deal with them long threaded bolts"
YouTube Link 2025-01-04T17:00Z 701K followers, 75.9K engagements
"Using tools to make my life easier changing a tap #asmr #diy #plumbing #tools #shorts #subscribe Welcome back to the channel on todays video. I got caught out to a customers house to replace their sink tap that was spraying them whenever it was turned on. The access for the tap was pretty tight but lucky to me Ive got my little hand spanners that can get into these tight spaces so after isolating the water feeds I can undo the tap flexible remove them and then using the Nerrad tappex kit long sockets and my Wera cyclops I can easily remove the old tap. With the old one out I managed to slide"
YouTube Link 2025-11-05T17:00Z 686K followers, 150.6K engagements
"How to stop a tap from moving #asmr #asmrsounds #diy #plumbing #shorts #tools #subscribe #foryou Welcome back to todays video on this job. I got called out to a customers house because their tap was wobbling. The main cause of this was that the tap was stiff and each time they turned it off it loosened it more. I started off by isolating the feeds to the top and undoing the old one using my Nerrad tappex kit. This allows me to slide up over the pipework and locate onto the top connector and with that be in loose I can hold the plastic nut with one hand and turn the tap with the other. This"
YouTube Link 2025-11-17T17:00Z 688K followers, 112K engagements
"How to remove old silicone and apply new #subscribe #youtubeshorts #plumbing #silicone Quick video showing removing silicone with ct1 multisolve spray cutting the old silicone out. Cleaning up and applying new bt1 silicone with more multisolve to help profile the silicone to tight sharp edges"
YouTube Link 2023-05-29T14:49Z 688K followers, [----] engagements
"Plumbing jobs with mmplumber ep19 Rads In this asmr plumbing video Im showing a few of the previous videos in longer form for you to enjoy them at slower pace In the video the jobs are all doing radiator work. The first [--] jobs are using MLCP pipe and press tool from Ridgid. I found this system extremely easy to use fast clean and efficient and the wavin Tigris I think is the future of plumbing works. The last video Ive swapped a radiator for a column style and had to adjust pipework under the floor. Im using brace brackets from monster plumb which help brace the pipework instead of using"
YouTube Link 2025-02-16T18:00Z 609K followers, 15.3K engagements
"Simple job turns hard fitting a washing machine Welcome back to the channel on todays video. Ive been called out to a customers house to fit a new washing machine. The only thing is that upon inspection we are left with a few problems normally fit in a washing machine is super easy. So on this job the previous plumber before when they took the old appliance out theyve left the outlet pipe to the sink open ended and cut off to the bigger size because our new washing machine has a smaller outlet discharge hose were gonna have to adapt onto it. Normally the easy way of doing that is to change"
YouTube Link 2025-11-07T17:00Z 681K followers, 17K engagements
"Vetopropac Wrencher Solder Bag #subscribe #youtubeshorts #veto"
YouTube Link 2023-03-27T21:01Z 678K followers, [----] engagements
"Best plumbing HACK to fix a cold radiator #asmr #hack #asmrsounds #tools #diy #plumbing #shorts Welcome back to the channel on todays video. I was called out to a customers house because they have a cold radiator and Im gonna show you the best Plumbing hack to get it back hot again. Radiators typically have a thermostat on one side which is adjusted by a rotating head. This normally gets shut down during the summertime and then when you open it back up in the winter the pin and the washer get stuck on the inside so a nice easy way to free this up is by bouncing a hammer on the end of the pin"
YouTube Link 2025-11-06T17:00Z 685K followers, 180.7K engagements
"Worst plumbing job New sink tap hole in sink #asmr #diy #howto #plumbing #subscribe #youtubeshorts Ceramic sinks are a plumbers nightmare They normally come with a sticker for you to tap on but this sink had nothing Had to take an educated guess and using a hammer and screwdriver knock a hole through A diamond drill bit at 35mm normally works from the underside but I couldnt fit the drill in so I had to go to town on the sink. Old school style Enjoy"
YouTube Link 2024-03-08T16:19Z 688K followers, 355.3K engagements
"Fixing a fallen radiator back to the wall #asmr #diy #plumbing #shorts #asmr #tools #subscribe Welcome back to the channel on todays video. Ive got caught out to a customers house because their radiator fell off the wall Luckily this was a new build and pipework is made of plastic with fittings that do allow it to twist and turn as long as there is enough slack on the pipework. The wall plasterboard anchors gave away these with the pull fixings type. the board didnt seem too bad in other areas which is why I used some bull fixings in the slider parts and drilled new positions in the middle."
YouTube Link 2025-11-30T16:04Z 692K followers, 660.6K engagements
"Plumbing jobs with mmplumber EP21"
YouTube Link 2025-08-21T17:05Z 694K followers, 245.1K engagements
"Removing a radiator and prep for new #asmr #amsrsounds #howto #diy #plumbing #subscribe #shorts"
YouTube Link 2025-08-24T16:00Z 681K followers, 645.4K engagements
"Plumbing jobs with mmplumber EP23"
YouTube Link 2025-09-04T16:00Z 686K followers, 183.7K engagements
"Fixing a leaking toilet through a tiny hole #asmr #diy #howto #plumbing #shorts #subscribe #tools"
YouTube Link 2025-10-05T06:00Z 706K followers, 671.9K engagements
"How to fix an outside tap to the wall like a pro In this ASMR Plumbing video an existing outside tap was so flimsy to touch. I couldnt leave it how it was. Every time the customer turned and shut off the outside tap the tap itself and the pipework would wiggle in the wall. I started by cutting the old pipe off that was protruding through the wall and then cutting the pipework on the inside to be able to pull it completely out. Once the pipe is out of place and then installed an outside tap wall plate with a pipe attached this was wrapped in insulation tape to avoid contact with the concrete"
YouTube Link 2024-11-26T17:00Z 707K followers, 11.5M engagements
"How to fix a leaking isolation valve #asmr #asmrsounds #diy #plumbing #shorts #subscribe #tools"
YouTube Link 2025-11-22T07:14Z 693K followers, 102K engagements
"Fixing basic plumbing jobs Welcome back to the channel today we got some odd jobs to sort out nice and easy just what I like as a maintenance plumber. I do a lot of work for an estate agent and on the letting side they just pump me loads of jobs to try and sort out for the landlord. The first job is a customer has called me in because they have a leak coming from their kitchen sink and upon inspection the joint between the waste and the stainless steel sink looks terrible and when tightening up the trap onto the waist it constantly jumps threads . So no messing about here time to install a"
YouTube Link 2025-03-15T18:00Z 706K followers, 84.1K engagements
"How to remove a radiator for decorating Welcome back to the channel on todays video. Ive been caught out to a customers house because they want this radiator taken off so they can decorate behind it. Im gonna show you my way on how to remove this radiator safely and effectively. I know theres many tools that Im gonna be using in this video that you dont have access to but as long as you have something similar it will make your life easier. The first thing you wanna do when were removing radiators is make sure that your area is fully protected as the water could be black and it will stain"
YouTube Link 2025-10-17T16:00Z 681K followers, 186.1K engagements
"How to solder without getting drips #howto #diy #tools #asmr #asmrsounds #shorts #subscribe #foryou"
YouTube Link 2025-10-19T07:19Z 674K followers, 58.4K engagements
"How to pressure test plumbing using the Milwaukee M12 Inflator #subscribe #plumbing #milwaukee Quick video of me pressure testing the m12 inflator from Milwaukee tools The bits I use to make this rig up is Amazon - 1/8" BSP BSPT Schrader Tank Valve 25MM Wheel AIR Compressor [---] PSI [--] BAR BES - Part number [-----] Screwed S/Steel Reducing Socket - 1/2" 1/4" BSP BES - Part number [----] End Feed Male Adaptor - 15mm F x 1/2" BSP TM BES - Part Number [-----] Screwed S/Steel Hexagon Reducing Bush 1/4" x 1/8""
YouTube Link 2023-05-16T20:22Z 679K followers, 10.7K engagements
"How to fix a leaking toilet pipe #shorts #asmr #asmrsounds #diy #plumbing #subscribe #foryou In todays ASMR Plumbing video I was called out to a leaking toilet so I had to remove the toilet out of place to be able to change the pan connector fittings as they were leaking to remove the silicon on the back of the toilet tank. I heated up a trail with a blow torch pushed it down on top of a silicon and it melts all the way through a nice easy way to remove thatthen its just a case of removing the old parts installing a new and putting it all back together again"
YouTube Link 2025-11-23T07:09Z 687K followers, 55.9K engagements
"How to solder a vertical copper fitting with no drip #subscribe #youtubeshorts #instagram #plumbing"
YouTube Link 2023-05-14T13:14Z 697K followers, 20.3K engagements
"Freezing copper pipe to fit new isolator #asmr #diy #howto #tools #shorts #subscribe #viral #foryou In this ASMR Plumbing video Im freezing a copper pipe to fit a new isolation valve. With the pipework full of water I wanted to be able to cut an isolation valve in without draining the system so Im showing how to use a freeze kit to be able to do this The freeze kit Im using is from arctic hayes in the uk. The kit comes with a few wraparound pockets which attach using a hose to the freeze bottle. The aim is to try and not waste so much liquid and rely on the vapour to freeze but sometimes you"
YouTube Link 2025-02-08T17:00Z 605K followers, 430.4K engagements
"New liquid PTFE XPRO Gripaloc #asmr #asmrsounds #tools #howto #diy #subscribe #youtubeshorts In this plumbing video Im showing off a newnproduct that has come to market. There is a nice liquid ptfe thread sealer on the market and that is from XPRO This ptfe replacement is more like the [---] we all use and love and a lot better than the blue as its non drip In this video you can see the difference in the [--] products. The blue stuff drips everywhere which will stain anything it touches The new gripaloc is a yellow in colour and much thicker which is better and far less likely to drip on the"
YouTube Link 2024-06-30T16:00Z 709K followers, 2.4M engagements
"The BEST drywall fixings to fix a toilet #howto #diy #asmr #tools #plumbing #foryou #subscribe Welcome back to the channel on todays video. I was working on a toilet and needed to screw the toilet back against the wall. This wall had a void behind which is common either a stud or drywall. My most preferred fixings are these from Bullfix which require you to drill a [--] mil hole and push a insert inside and then the fishtail like fixings get touched inside of that and they spread either side given maximum strength to hold what youre fixing on the wall Ill put a link down below so you can check"
YouTube Link 2025-11-18T07:00Z 692K followers, 516.9K engagements
"Fixing the easiest plumbing leak #howto #diy #asmr #asmrsounds #tools #subscribe #shorts #foryou Eness ASMR Plumbing video I am fixing the easiest plumbing leak. We get caught out to these jobs quite often where the homeowner has turned off the water using the tap turned it back on again and found out that the tap is dripping. The easiest way to fix this is just by nipping up the packing gland which is just behind the handle oil it needs is about a quarter of a turn. You can take it completely out and put some PTFE tape inside but normally I find that just nipping it up works just as good."
YouTube Link 2025-02-10T17:00Z 606K followers, 291.7K engagements
"How to make my heat proof burn TROWEL Welcome back to the channel on todays video I thought Id show you exactly how I make my heat proof burn trowel. This is a tour that I use in all my soldering jobs as its nice and thin and fits behind pipework really easily protecting a customers property. I get asked this question so many times on what I use exactly to make the ones I use in my videos and thats the reason why I made this video today so its not exactly rocket science you can probably guess but in theory it is a [--] inch builders trial with a heat burn Matt Stuck to it using heat resistant"
YouTube Link 2025-11-04T18:46Z 679K followers, [----] engagements
"How to fit a drain valve on a radiator #howto #diy #plumbing #asmr #tools #subscribe #shorts"
YouTube Link 2025-06-12T16:00Z 706K followers, 190.5K engagements
"Fixing a leak on plastic pipe to radiator #shorts #asmr #asmrsounds #diy #plumbing #tools #shorts Welcome back to the channel on todays video Im showing how to fix a leak on a plastic pipe fitting to a radiator. Ive got called out to this customers house because they have a leak coming from a fitting on a plastic pipe to a radiator valve. These fittings are very common in a brand-new belt as a transition from [--] mm micro pipes to a [--] mm compression valve. The easiest way I find to replace these is by turning off the boiler and draining the heating system down enough so theres very little of"
YouTube Link 2025-11-12T17:00Z 687K followers, 511.1K engagements
"Toilet plumbing hack #howto #diy #asmr #subscribe #youtubeshorts #learn #foryou #ytool #asmrsounds How to extend toilet connector the right way. There are many ways to get over a pan connector being too short but using the right connector will get over this problem. If you use [--] pipe its too big so you need to use the correct connector or you will push the rubber out the fitting. If you liked this asmr plumbing video then please give it a like comment below if you would do anything different and please subscribe if you are new See you on the next one"
YouTube Link 2024-09-11T16:31Z 706K followers, 2.1M engagements
"I was wrong Welcome back to the channel on todays video. Ive been called out to a customers house because theyve got a loud banging humming noise coming from the hot tap on multiple fixtures. It doesnt matter whether you open up the shower bath taps or basin taps this loud continuous noise happens until the taps are turned off. This noise is what we class as waterhammer in the Plumbing industry and its normally generated from like a ball valve or taps with a washer inside thats jumping around this echoes all the way through the house especially as on this system it is fed from a Combi boiler"
YouTube Link 2025-10-24T16:01Z 677K followers, 29.3K engagements
"Fixing kitchen sink plumbing and high pressure issue Welcome back on todays video. Ive been called out to a customers house because they have really high water pressure issues a kitchen sink tap to change and while Im there Im going to install a limescale filter on the watermain as Ive got it all in pieces anyway. To solve these issues Im gonna be installing a pressure reducing valve on the incoming watermain. We got quite a decent bit of space and were gonna be installing an isolation valve after as turning the water on and off in emergency on the stop tap can be a little bit fiddly. ."
YouTube Link 2025-06-20T16:00Z 706K followers, 38.3K engagements
"Easiest way to bend over a pipe #asmr #tools #tips #foryou #shorts #subscribe #diy #learn #plumbing In his ASMR Plumbing video Im showing how to bend copper pipe over another pipe using a different method than a normal traditional way but hopefully a lot easier. Using the traditional benders you would be half guessing the angles because the lines arent really that well labelled to where you need to bend to so to make a full crossover fitting like this can take a little bit of time a bit tedious and its easy to get wrong Using my Monument pipe benders the markings are very simple. Its at"
YouTube Link 2025-02-18T17:00Z 609K followers, 72.7K engagements
"Soldering copper pipe with a pipe stand #asmr #asmrsounds #tools #diy #plumbing #shorts #subscribe"
YouTube Link 2025-10-04T06:27Z 676K followers, 50.8K engagements
"How to fix a leaking sink waste like a pro #howto #diy #plumbing #asmr #shorts #subscribe #tools Welcome back to the channel on todays video. Ive been called out to a customers house because their kitchen sink waste has come loose and started to cause a leak. The easiest way to fix this is by removing it at fitting a new one as you have all brand-new seals and the way that I like to make them into the sink is you silicon as if you dont you run the risk of them becoming loose over time especially with heat and also the rubber these days isnt exactly rubber anymore. It feels more like plastic"
YouTube Link 2025-11-27T17:01Z 694K followers, 132.1K engagements
"veto wrencher tool bag review 🔥"
YouTube Link 2022-10-02T20:41Z 695K followers, [----] engagements
"How to stop your outside tap from freezing #asmr #howto #diy #craft #plumbing #hack #shorts #tools"
YouTube Link 2025-10-13T06:09Z 673K followers, 59.5K engagements
"How to fix a cold radiator Welcome back to the channel on todays video. I was sent out to a customers house because they had a radiator that wasnt getting hot. All the other is on the system working perfectly and it was just a single one that was struggling so if you have a cold radiator. Theres two things to check one is air and the other is the valves. if the valves arent letting the flow through the radiator then it wont circulate and therefore get hot if theres air in the system generally you have warm at the bottom but cold everywhere else The first thing to check is air and all you need"
YouTube Link 2025-11-14T17:01Z 684K followers, 12K engagements
"How to fix a leaking air vent like a pro #howto #diy #asmr #shorts #tools #plumbing #subscribe"
YouTube Link 2025-11-01T07:10Z 679K followers, 193.7K engagements
"How to remove silicone and apply new #asmr #howto #diy #tools #tips #learn #shorts #subscribe"
YouTube Link 2025-02-21T17:00Z 610K followers, 26.4K engagements
"How to fix a dripping tap #tap #dripping #diy"
YouTube Link 2023-06-26T19:05Z 702K followers, 47.6K engagements
"How to first fix for a bath and shower #howto #asmr #tools #shorts #subscribe #foryou #diy #tips"
YouTube Link 2025-06-26T16:00Z 675K followers, 74.8K engagements
"How to repair a leak on flexi pipe #asmr #diy #subscribe #youtubeshorts #plumbing #tools #plumber Fixing a leaking flexi hose pipe for a kitchen sink tap Plumbing asmr video The hose was far too long and the flex kinked it self over time which ruptured the inside of the flexi hose. New short flexi pipes was fitted and connected back up to the isolation valves. Always make sure the hoses are supported if long to stop this from happening"
YouTube Link 2024-04-17T15:56Z 683K followers, 5.3M engagements
"Fixing a sink waste thats holding water #asmr #asmrsounds #tools #diy #plumbing #shorts #subscribe"
YouTube Link 2025-11-08T17:00Z 709K followers, 12.3M engagements
"How to fit a tap to a stone wall #asmr #diy #howto #foryou #tools #plumbing #shorts #subscribe In this ASMR Plumbing video Im installing an outside tap onto a stone wall. The pipework had to come through where it was and there was no fixing on the stones below so thats the reason why I mounted it on the stone above. I couldnt use a wall plate as where the pipe come through. There was a lot of cement and the brick wasnt strong enough around it to be able to drill fixings hence the reason why the pipes come through and Ive had to solder a [--] to be able to mount it on the stone. After cleaning"
YouTube Link 2025-02-19T17:00Z 609K followers, 33.3K engagements
"No wonder this wouldnt work Welcome back to the channel on todays video. Ive been caught up to a customers house because they got no hot water. They have a hot water tank with two heating elements and I can only assume that one of them has gone wrong Because I need to drain the whole tank down its much beneficial for the customer and myself to change both of them at the same time. This tank is what we class as a unvented system which is pressurised by means water. These tanks have a common issue when trying to drain as normally they like to airlock which can be very annoying to get all the"
YouTube Link 2025-11-21T17:01Z 687K followers, 27.2K engagements
"New Tools And My New Tap Bag Loudout Welcome back to the channel on todays video Im gonna show you my new tap tool bag loadout using the tool roll bag from atlas46 This tool role configuration sparked my interest as its fully made from canvas which makes it super light and it wont scratch any of my customer services whether I put it on the floor or up on a kitchen worktop. It has good separation for my tools as it groups certain tools together so I know where they all are after I use it all I literally just drop it straight back down and then I know Ive always got it in there . We have four"
YouTube Link 2025-11-25T17:01Z 687K followers, [----] engagements
"Making my own flexible pipe toilet connection #asmr #diy #plumber #tools #shorts #subscribe #foryou Welcome back to the channel todays video Im replacing a toilet flexible connection with making my own. These flexible hoses have a rubber hose on the inside and a braided on the outside what tends to happen is that they can break down and even split. In todays video Im making my own using Viega smart press mlcp pipe and connections by bending it into place and replacing the isolation valve to an angled. This pipe is lined with metal so it keeps its shape and will last many many years. We have"
YouTube Link 2025-10-18T06:32Z 678K followers, 144.5K engagements
"How to silicone shower enclosures #subscribe #plumbing #silicone #caulking"
YouTube Link 2023-07-26T18:24Z 686K followers, 71.9K engagements
"Plumbing up micro pipes to a radiator #howto #diy #asmr #asmrsounds #tools #shorts #subscribe In this ASMR Plumbing video I and Plumbing up micro pipes to a radiator. The pipes dropping down the wall in the trunk in are [--] mm so Ive continued to run the pipes along the wall onto the radiator in one length using my pipe bender. The fittings that are used to connect the new pipe to the old pipe was a Yorkshire solder filled fitting and how I like to connect it onto the radiator is using a 10mm to 15mm long tail reducer. I really dont like [--] mm valves. The seal can crash onto the pipe very easy"
YouTube Link 2025-02-13T17:00Z 606K followers, 42.9K engagements
"The best way to fix a leaking kitchen sink waste #asmr #howto #diy #tools #shorts #subscribe"
YouTube Link 2025-09-06T06:15Z 677K followers, 171.4K engagements
"How to fix a leaking sink waste like a pro #howto #diy #plumbing #asmr #tools #shorts #subscribe"
YouTube Link 2025-10-03T05:40Z 687K followers, 496.8K engagements
"Plumbing up a tap with less joints to leak #asmr #diy #plumbing #shorts #subscribe #foryou #tools In this ASMR Plumbing video Im changing a set of taps on a sink and re Plumbing up the pipework with less joints to leak After removing the half pedestal off the wall under the sink I began to remove the old sink tap and disconnect the feed from the Plumbing. Normally when I disconnect the plumbing feeds I remove the nuts and washers and after inspecting the pipework when the olives have come off the pipework was damaged which is the reason why I had to cut before it and extend the pipes"
YouTube Link 2025-02-23T15:53Z 611K followers, 40K engagements
"5 tools for a plumbing apprentice [--] tools for a plumbing apprentice In this video Im explaining which [--] tools an plumbing apprentice needs or should carry at all times The main idea for an apprentice in my eyes if you need to try and be one step ahead of whoever youre working with that generally makes their life easier passing kit or cleaning up behind him will make you seem the best apprentice in the world to the person youre working with. If you can carry a small amount of tools with you and save taking the tools away from your mentor then that will keep him from working and if not hes only"
YouTube Link 2025-02-25T18:05Z 611K followers, [----] engagements
"How to fix a leaking toilet #vlog In todays #plumbing #vlog video Im showing how to #fix a leaking toilet Plumbers worst #nightmare with the dread blue block dye Ive been called out to a customers property where they have a leaking toilet. They showed me a picture and theres blue dye everywhere which is from limescale blocks. The approach of and plan of action is to remove the blue block before working as if this guy gets on anything it will stain forever . Wants the blue block is out and diluted. Im able to remove the system and do the cold water feed and remove them from the toilet to empty"
YouTube Link 2025-02-21T18:00Z 610K followers, [----] engagements
"New improved pipe fitting Welcome back to the channel todays video I thought Id show you a pope fitting that Ive come across and I know you probably havent of seen it. We have all seen tap connector fittings which normally adapt from copper to a male threat. These ones have a ridge which allows a fibre washer to sit inside without moving. The only problem with this fitting is that you can only use that type of washer and we all know if they get a little bit of moisture then they always breakdown and cause a leak. While I was visiting a shop in London which was Lhp supplies. I was shown a"
YouTube Link 2025-11-18T17:01Z 685K followers, [----] engagements
"How to get perfect pipe lagging joints #asmr #asmrsounds #diy #tools #shorts #subscribe #tips In this ASMR Plumbing video I am showing how to get perfect joints when lagging copper pipes. If you have pride in your paperwork when installing pipework then you have to have the same standards with the insulation that covers it. Getting perfect joints using a template cutter like this one will ensure that all your joints butt up to each other with no gaps as long as you get the distance is right. The tool makes it really easy to cut your [--] [--] and can even cut for long radius bands using a 22.5"
YouTube Link 2025-02-11T17:00Z 606K followers, 1.2M engagements
"How to change a Tap Washer #subscribe #diy #plumbing"
YouTube Link 2023-07-14T17:37Z 676K followers, 31.5K engagements
"How to finish radiator pipes like a pro #asmr #diy #subscribe #tools #plumber #plumbingfitting Asmr plumbing video on How to finish copper pipe like a pro with radiator pipes out the floor. Simple fit the radiator and after its all done slide the cover open the top splitting in the middle. Then measure and cut the sleave to size that clamps over the copper pipe giving a professional clean chrome finish"
YouTube Link 2024-03-01T12:46Z 687K followers, 8.3M engagements
"How to clear air lock in taps #plumbing #diyequipment #diy #plumping #howto"
YouTube Link 2023-10-07T18:52Z 695K followers, 392.1K engagements
"New Knipex Grips Welcome back to the channel todays video is all about upgrading my current knipex grips The Cobras have been a set standard in my tool bag so many years now Ive used these for at least 10-12 years and I honestly wouldnt have any other brand. Ive tried many many different types of grips and the ones from Knipex feel the best in our hands they very well economically designed. The handles are nice and slim and when you close them up they finish really close together they do lots of different sizes. My favourite are the [---] and the [---]. The [---] I mainly use for sizes above [--] and"
YouTube Link 2025-10-21T16:01Z 674K followers, [----] engagements
"How to unblock a toilet like a pro #asmr #howto #diy #tools #subscribe #foryou #shorts #plumbing"
YouTube Link 2025-10-22T16:02Z 677K followers, 32.6K engagements
"How to sharpen a multitool blade like a pro #asmr #asmrsounds #diy #tools #subscribe #shorts"
YouTube Link 2025-10-26T07:31Z 678K followers, 151.4K engagements
"Lazy plumber installed this toilet In todays plumbing video I have been sent to fix a toilet that is leaking constantly into the pan. The main reason why this happens is due to the siphon washer leaking past or the fuel valve constantly runs and doesnt shut off. The problem that the customer has is that they hear random surgeon noises through the night and that is because the toilet is losing water through the washer and the fill valve has to fill back up to its original level. The Plumbing on his toilet isnt the best. The previous plumber installed two flexible houses together which just"
YouTube Link 2025-03-21T17:01Z 673K followers, 85.4K engagements
"What the inside of a perfect soldered joint looks like #asmr #diy #howto #tools #plumbing #shorts In todays ASMR Plumbing video Ive cut open a section of a Yorkshire solder ring fitting to show you exactly what it looks like from the inside. These fittings have solder pre-installed inside of them so there is no need to add extra if you want to be extra safe then only a little amount is needed for maximum security and confidence. I hope you like this video. If you do please give it a like comment down below if youve ever used these types of fittings and please as always subscribe if you are new"
YouTube Link 2025-11-21T07:00Z 686K followers, 22.6K engagements
"The CORRECT way to connect a tap flex to an isolation valve #asmr #tools #diy #plumbing #shorts In todays ASMR Plumbing video I was installing a new tap and the flexibles I wanted to connect up the correct way of connecting the flex line onto the isolation valves. In my opinion the only way of doing this is by tightening up the nuts with jointing compound as that will stop them from leaking and because the isolation valves has a bevelled edge. You need to swap that out or convert it to flat face that is where the little adapters come in handy and then I can put the new flex line on the valve"
YouTube Link 2025-11-25T07:15Z 697K followers, 113.8K engagements
"How I fix this toilet Welcome back to the channel on todays video. Ive been called out to a customers house because they have got some toilet problems. Upon arrival I found this toilet flush was in parts theyve obviously had issues flushing so in typical MM plumber fashion Im gonna be stripping it all out and rebuilding the toilet with brand-new parts. The flexible hose could look better so as you are aware I like to hard pipe these so Im gonna show you exactly how to do that and bend the copper pipe perfect from a new isolator into the toilet Ive isolated the water outside so Im able to cut"
YouTube Link 2025-10-31T17:01Z 679K followers, 11.5K engagements
"How to plumb a instant hot water tap #howto #diy #asmr #shorts #subscribe #tools #foryou #learn In this asmr plumbing video Im installing an instant hot water tap heater. The unit Im installing is from water drop which not only heats up your water and turns your tap into a kettle but it also filters your cold water using reverse osmosis The unit is super easy to install with its push fit like connections and I love the digital display on the tap its self. The model Im installing is just a stand alone hot water tap so you it wont replace your original kitchen sink tap but give you the open to"
YouTube Link 2024-11-13T17:00Z 679K followers, 394.9K engagements
"How to connect a tap flexi the correct way #asmr ##asmrsounds #howto #diy #subscribe #youtubeshorts Stop connecting your taps the wrong way and do this instead In this asmr plumbing video Im showing how to connect a tap flexi the correct way The wrong was it just connecting onto an isolation valve. This is due to having a small surface area and also being bevelled it will cut into the washer in the tap flexi Instead always fit a flat faced male iron or find an isolation valve that is flat on one side Be a cut above the rest and start connecting your taps up the correct way"
YouTube Link 2024-06-21T16:00Z 705K followers, 193.8K engagements
"How to fix a leaking compression joint #asmr #shorts #diy #howto #tools #tips #plumbing #subscribe In this ASMR Plumbing video Ive been called out to a job where there is a compression fitting leaking on top of a hot water cylinder because the pipework comes from above my approach was to cut a leave of valve in so I could control the water flow coming back at me and using a hacksaw. I cut a tiny slot in the pipe so I know exactly how much water is inside and how much pressure is in the pipe. If you dont do this and go straight with a pipe slice and find out that you have an isolated it"
YouTube Link 2025-02-20T17:01Z 610K followers, 51.2K engagements
"How to lag copper pipes like a pro #asmr #asmrsounds #diy #howto #subscribe #youtubeshorts #tools In this asmr plumbing video Im showing how to lag copper pipes like a pro and get perfect joints This in video Im using the pipe lagging tool from www.drpipe.co.uk and a folding lagging knife from plumbpal. Together using both these tools I can measure the angles and cut them perfectly together to get seamless joints for the perfect lagging job If you liked this asmr plumbing video then please give it a like comment below if you would do anything different and please subscribe if you are new See"
YouTube Link 2024-08-20T06:05Z 702K followers, 20.9M engagements
"What A Mickey Mouse Job Welcome back to the channel on todays video Im gonna be installing one of the worlds most expensive and rarest outside taps but you can get on the market. This outside garden tap must be some sort of collaboration with Mickey Mouse and Im going to be installing it at my Nans house who is a big Disney fan and as soon as I saw that this was available I had to buy it for her for her garden Never gonna have to alter the back plate that it fixes to as this tap is from America and is a three-quarter thread normally in the UK or outside taps or half inch so Im gonna need to"
YouTube Link 2025-12-05T17:01Z 689K followers, 10.2K engagements
"HOW To sharpen a multitool blade for multi use #howto #diy #plumbing #asmr #subscribe #revivablade If you have a damaged multiblade or kit something to blunt yours there is hope to reuse your blade now in stead of throwing it away and using another The reviva blade can re sharpen by cutting new heath into your blade With some technique you can get the blade to cut just as good as a new blade"
YouTube Link 2024-01-22T06:57Z 679K followers, 21.9M engagements
"Using the best plumbing tools to fix leak #asmr #asmrsounds #howto #diy #subscribe #youtubeshorts In this plumbing asmr plumbing video Im fixing a leak on a cold water main pipe. The leaks on a soldered fitting tee feeding an electric shower and roof tank above. First thing is to show the water off and cut the pipe to drain the water into my derblaue buckets and using a funnel to catch the water. Installing a lever valve to help control water better and then simply replumb the copper back up with solder and ended joints"
YouTube Link 2024-07-29T16:00Z 683K followers, 582.5K engagements
"How to fix a loose tap for new #asmr #howto #diy #foryou #shorts #subscribe #tools #plumbing"
YouTube Link 2025-10-11T07:00Z 706K followers, 417.5K engagements
"Which Wera joker spanner should you buy #tools #diy #tips #plumber #subscribe #shorts #review In this video Im explaining which Wera joker spanner should you buy In all my videos you see me use the Spanish and no matter times that I get asked which one does what is amazing so I thought I would make this video to hopefully explain a little bit more and answer some of your questions. So I normally carry three of the Wera joker spanners in my tall bag at all times I have the L XL and XXL versions all for specific Plumbing tasks. The L I use money for all my radiator valve work so when you need"
YouTube Link 2025-02-25T17:01Z 677K followers, 51.5K engagements
"How to plumb up a radiator valve to pipe #howto #diy #asmr #tools #shorts #subscribe #asmrsounds"
YouTube Link 2025-10-21T06:04Z 696K followers, 1.4M engagements
"These connectors are a must for all plumbers Welcome back to the channel on todays video. I got caught out to a customers house because they had trouble trying to install a new kitchen sink tap on their own. The new feeds are 3/8 connections when the old was 1/2. This is common in Europe especially if you buy taps from there such as grohe or handgrohe. Lucky for me there is isolation valves underneath in [--] mm so I can adapt to the smaller size using a simple brass fitting. Im gonna show you how to remove the old tap and fit the new one and on my visit to China and Hong Kong. I found a tool"
YouTube Link 2025-12-02T17:01Z 706K followers, 94.6K engagements
"How to install a hot outside tap #howto #diy #tools #foryou #asmr #shorts #subscribe #plumber"
YouTube Link 2025-07-10T15:58Z 701K followers, 263K engagements
"Best Copper Pipe Bend Hack #asmr #asmrsounds #tools #plumbing #shorts #hack #subscribe Welcome back to the channel in todays ASMR Plumbing video Im showing how to bend copper pipe perfectly into place using the Monument benders. I simply marked up where I wanted the posts to be bent measured back [--] mm and then put the hook of the benders on that Mark and Im able to pour a full [--] band leaving the Pipe perfectly to fit exactly where I wanted it . This is a really good hack to not waste copper and to be more efficient without using Bends to gain maximum flow if you like todays Plumbing video"
YouTube Link 2025-10-15T05:30Z 679K followers, 90.6K engagements
"CT1 Miracle seal to fix pin holes in copper #subscribe #youtubeshorts #instagram #plumbing"
YouTube Link 2023-05-22T10:24Z 686K followers, 35K engagements
"Fixing a leaking toilet with silicone everywhere #asmr #howto #diy #tools #foryou #shorts #plumbing"
YouTube Link 2025-10-14T06:04Z 679K followers, 214.5K engagements
"How to measure and cut pipe for radiator valves #asmr #howto #diy #shorts #subscribe #tools #foryou In todays ASMR Plumbing video Im showing how to cut down your pipes to the correct height for radiator valves. The easiest way I find to do this is to put the valve on the pipe first measure the internal depth by marking the bottom of the nut and then take the valve off hoover it to the side of the pipework and mark on the valve where the pipe finishes Now you can hover the valve to the correct height position on the radiator and Mark the pipe to cut. They should get you exactly where you want"
YouTube Link 2025-09-14T16:01Z 707K followers, 727.3K engagements
"How to fit an outside tap to the wall like a pro #howto #diy #plumbing #asmr #shorts #subscribe In todays asmr plumbing video Im installing an outside tap to a red brick new built house. First you need to drill a 22mm hole so we can sleeve the hole with over flow plastic pipe at 20mm od. This sleeve is so the pipes protected from cement corrosion and if the pipe pin holes inside it will show either end. Once the hole is drilled and sleeved I can enter the outside tap stem inside and begin to mark the mounting holes. Once marked I can drill with a [---] drill bit and insert red plugs. Some"
YouTube Link 2025-10-09T16:01Z 678K followers, 419.7K engagements
"Replacing a toilet flexi pipe for copper #howto #diy #plumbing #asmr #asmrsounds #tools #shorts Welcome back to the channel on todays video. Ive been called out to replace this flexible pipe onto the toilet and replace it with hard copper. The customer didnt like the look of this and they wanted to paint the pipe to blend in copper pipe is a much more reliable line than the flexible as inside is flexible. There is a rubber hose which can rupture at least with a copper line. The only weak point is the joint at the top. Start by removing a line with my Wera joker xl spanner. This is a self"
YouTube Link 2025-11-02T07:01Z 706K followers, 1.4M engagements
"How to solder copper pipe without burning Welcome back to the channel on todays video. Im connecting up some radiator pipes to the existing system pipework. We have [--] mm and [--] mm to cut and put two ties to join up on new pipework. After draining the heating system I always like to cut the copper using a hacksaw as this is easily controllable if you still have water insight as youre able to either tape up the cut or catch it in a bucket nice and easy in one position. Using the same hacksaw I sliced through both of the pipework so then I can stick a manometer hose over the top and suck the"
YouTube Link 2025-10-30T17:01Z 680K followers, 96.5K engagements
"How to bend a perfect copper pipe set first try #asmr #hack #diy #howto #foryou #shorts #tools In this ASMR Plumbing video Im showing how to bend a set on a piece of [--] mil copper pipe. This set is a normal bends that all plumbers have to do to get things back in square if things are slightly out of line and using this formula it is really easy to be able to get it done first try. The formula consists of bending at [--] angles times in the distance required by [---] and set two marks at both these points in a specific spot of the bender while bending at [--]. Will get you the perfect distance in"
YouTube Link 2024-12-13T17:01Z 704K followers, 236.9K engagements
"How to get an apprenticeship Welcome back to the channel on todays video Into my old college to talk with my college lecture on how to get an apprenticeship. This is my lecturer mr Dave Quinton at SGS Stroud college who was my teacher [--] years ago. I get constant questions on how to get an apprenticeship or asking which course is best for them and I thought there would be no better person to talk to apart from my old teacher. In this video we go through a few tips on how to get an apprenticeship what youre expected to do within it how long it is what qualifications you need and whether doing"
YouTube Link 2025-11-03T17:01Z 687K followers, [----] engagements
"How did this plumber not have a leak In todays video Ive been called out with two problems in this property the first being a tap on the kitchen sink which is completely snapped and a flexible hose underneath looks like its ready to burst On a leaking toilet pipe which is connecting onto the toilet fill valve is leaking due to the fibre washer deteriorating. So the main reason why this tap is considerably loose is that the back nut underneath has completely snapped leaving the top super wobbly as its plumbed up using a flexible . When looking underneath the sink unit this flexible hose is all"
YouTube Link 2025-03-07T18:00Z 616K followers, [----] engagements
Limited data mode. Full metrics available with subscription: lunarcrush.com/pricing