# ![@fusion360mastery Avatar](https://lunarcrush.com/gi/w:26/cr:youtube::UCKQR9Z95Lq22SJut6PZmjwA.png) @fusion360mastery Fusion [---] Mastery

Fusion [---] Mastery posts on YouTube about autodesk, tutorial, sketch, model the most. They currently have [---] followers and [--] posts still getting attention that total [-----] engagements in the last [--] hours.

### Engagements: [-----] [#](/creator/youtube::UCKQR9Z95Lq22SJut6PZmjwA/interactions)
![Engagements Line Chart](https://lunarcrush.com/gi/w:600/cr:youtube::UCKQR9Z95Lq22SJut6PZmjwA/c:line/m:interactions.svg)

- [--] Week [-----] +77%

### Mentions: [--] [#](/creator/youtube::UCKQR9Z95Lq22SJut6PZmjwA/posts_active)
![Mentions Line Chart](https://lunarcrush.com/gi/w:600/cr:youtube::UCKQR9Z95Lq22SJut6PZmjwA/c:line/m:posts_active.svg)


### Followers: [---] [#](/creator/youtube::UCKQR9Z95Lq22SJut6PZmjwA/followers)
![Followers Line Chart](https://lunarcrush.com/gi/w:600/cr:youtube::UCKQR9Z95Lq22SJut6PZmjwA/c:line/m:followers.svg)

- [--] Week [---] +88%

### CreatorRank: [---------] [#](/creator/youtube::UCKQR9Z95Lq22SJut6PZmjwA/influencer_rank)
![CreatorRank Line Chart](https://lunarcrush.com/gi/w:600/cr:youtube::UCKQR9Z95Lq22SJut6PZmjwA/c:line/m:influencer_rank.svg)

### Social Influence

**Social category influence**
[technology brands](/list/technology-brands)  [stocks](/list/stocks) 

**Social topic influence**
[autodesk](/topic/autodesk) #31, [tutorial](/topic/tutorial), [sketch](/topic/sketch) #973, [model](/topic/model), [how to](/topic/how-to), [metal](/topic/metal), [bend](/topic/bend), [hosted](/topic/hosted), [donate](/topic/donate), [shell](/topic/shell)
### Top Social Posts
Top posts by engagements in the last [--] hours

"Fusion [---] From Zero Beginner Step-by-Step Tutorial [---] 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-113 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates the rough solid block or "clay" of your object. How it works: You sketch the outline (profile) and pull it into 3D. Best for: Establishing the overall size and shape of the part. [--]. Fillet Definition: Rounds off sharp corners. The Golden Rule: You must apply your major fillets to the outside of the solid block before you use the"  
[YouTube Link](https://youtube.com/watch?v=PYzU7ygJ8K0)  2026-02-16T16:00Z [---] followers, [----] engagements


"Fusion [---] Sheet Metal Practice Series Exercise #2 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-112 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. New Sheet Metal Rule (The Foundation) Definition: Defines the physical properties of the metal you are using. How it works: The Problem: You cannot just "draw" sheet metal. Steel bends differently than Aluminum. The Solution: You go to the Sheet Metal Rules library and create a New Rule. You define: Thickness: e.g. 1.5mm. K-Factor: How much the material"  
[YouTube Link](https://youtube.com/watch?v=Y8VwdJT3I9Q)  2026-02-15T17:00Z [---] followers, [----] engagements


"Sketch to 3D Print in Fusion [---] Self-Locking Towel Hanger 3D Sketch and 3d Model : https://www.3dmechanism.com/post/fusion-for-3d-printing-project-03-self-locking-towel-hanger Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 Makerworld: https://makerworld.com/pt/models/2227290-heavy-duty-wall-hook-fusion-3d-printing-project#profileId-2422799 In this Fusion [---] tutorial youll learn the complete design-to-manufacturing workflow starting from a simple sketch moving through 3D modeling and finishing with a real 3D printed object. This tutorial is perfect for makers"  
[YouTube Link](https://youtube.com/watch?v=jWBG1ws6pwY)  2026-02-14T17:01Z [---] followers, [----] engagements


"Fusion [---] From Zero Beginner Step-by-Step Modeling Tutorial #03 Exercise - [--] 3D Sketch : https://www.3dmechanism.com/post/3d-cad-exercise-3 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: Revolve Definition: Creates a 3D solid or surface by sweeping a sketch profile around a central axis. How it works: Profile: You draw the cross-section of your object. Imagine slicing a chess piece or a car wheel in half verticallythat cut face is your profile. Axis: You select a line (usually a center construction line) to act as the"  
[YouTube Link](https://youtube.com/watch?v=Ffwp7eRRBWQ)  2026-01-26T16:00Z [---] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Modeling Tutorial #01 Exercise - [--] 3D Sketch : hhttps://www.3dmechanism.com/post/3d-cad-for-beginners-exercise-1 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this video you will create your very first 3D model in Autodesk Fusion (formerly Fusion 360). If you are an absolute beginner and have never used CAD software before this tutorial is for you. We will go through the basics step-by-step sketching and turning 2D drawings into 3D objects. In this CAD tutorial we'll use the features: Extrude Definition: Converts a 2D"  
[YouTube Link](https://youtube.com/watch?v=kriyqsimsRs)  2026-01-24T17:01Z [--] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Modeling Tutorial #02 Exercise - [--] 3D Sketch : https://www.3dmechanism.com/post/3d-cad-exercise-2 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: The primary tool for giving thickness to a 2D sketch. How it works: New Body: You select a closed profile (like a rectangle) and pull it to create a solid block. Cut: If you pull the profile into an existing solid it automatically switches to "Cut" mode to remove material (like cutting a window). Best for:"  
[YouTube Link](https://youtube.com/watch?v=uA4rErszOFQ)  2026-01-25T16:01Z [--] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial Housing 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-107 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: The primary tool for creating the main solid shape. How it works: You sketch the profile of your bracket (e.g. an "L" shape) and pull it into a solid block. Best for: Creating the main walls or "skeleton" of the part. [--]. Rib Definition: Creates a thin wall or support web from an open sketch curve. How it works: The Magic: You do not"  
[YouTube Link](https://youtube.com/watch?v=1zl5dCnr0zQ)  2026-02-10T17:00Z [---] followers, [---] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D02-04 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-98 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates the main cylindrical shape of the wheel. How it works: You sketch the cross-section of the rim (the "barrel" where the tire sits) and spin it [---]. Best for: The outer rim barrel and the central hub. [--]. Offset Plane Definition: Creates a sketching surface away from the origin. How it works: The Problem: The face of a car wheel"  
[YouTube Link](https://youtube.com/watch?v=2sidABvFs4o)  2026-02-06T16:00Z [---] followers, [----] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D02-02 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-97 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates a cylinder or ring by spinning a profile. How it works: You sketch the cross-section of a hub or bearing housing and spin it [---]. Best for: Creating the round "Head" of a part. Why Multi-Body You set the Operation to "New Body" so it stays separate from everything else for now. [--]. Extrude Definition: Pulls a sketch into a solid"  
[YouTube Link](https://youtube.com/watch?v=5LTpDnjx60k)  2026-02-04T16:15Z [---] followers, [----] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-03 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-93 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates the main solid shape. How it works: You sketch the side profile of your device (like a drill handle) and pull it into a solid block. Best for: Creating the rough "clay model" of your product. [--]. Fillet Definition: Rounds off sharp edges. How it works: Crucial Step: You must apply the major fillets to the outside of your solid"  
[YouTube Link](https://youtube.com/watch?v=B3FKlC_6YMI)  2026-01-31T16:00Z [---] followers, [---] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-01 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-67 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: The primary tool for creating the main solid shape. How it works: You sketch the profile of your device and pull it into 3D. Best for: Creating the raw "block" or outer boundary of your part. [--]. Mirror Definition: Creates a symmetrical copy of a Body or Feature. How it works: Efficiency: Instead of drawing a complex left and right side"  
[YouTube Link](https://youtube.com/watch?v=DRV-f3tIMro)  2026-01-27T16:00Z [---] followers, [----] engagements


"Fusion [---] From Zero Beginner Step-by-Step Modeling Tutorial #04 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-4 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates a solid ring or cylinder. How it works: You sketch a cross-section (like a rectangle standing up) and a center axis. Fusion spins it [---]. Best for: Creating the main body of the collar or pulley. Why not Extrude Revolve is better because you can easily add "chamfers" or complex grooves into the sketch profile itself"  
[YouTube Link](https://youtube.com/watch?v=EMOr1bXCaDA)  2026-02-01T20:00Z [---] followers, [---] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D02-03 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-98 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates a cylinder or profiled shaft by spinning a sketch. How it works: You sketch the cross-section of the shaft (including steps for bearings or gears) and spin it [---]. Best for: Creating the main "Stock Material" of the shaft. [--]. Offset Plane Definition: Creates a sketching canvas parallel to an existing plane but at a specific"  
[YouTube Link](https://youtube.com/watch?v=EffP66_eIf4)  2026-02-05T16:00Z [---] followers, [----] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial [---] 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-110 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates the primary solid shape. How it works: You sketch the profile of your bracket (usually an "L" shape or a "T" shape) and pull it into a solid block. Best for: Creating the main load-bearing walls or "skeleton" of the part. [--]. Rib Definition: Creates a thin wall or support web from an open sketch curve. How it works: The"  
[YouTube Link](https://youtube.com/watch?v=F5n84F35ljk)  2026-02-13T19:00Z [---] followers, [----] engagements


"Taper Angle Challenge 🔥 The Shell Trick That Makes It Work Fusion [---] Catics 3D02-05 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-100 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude (with Taper Angle) Definition: Creates a 3D shape that gets wider or narrower as it grows rather than having straight vertical walls. How it works: The Input: In the Extrude menu you will see a small box for "Taper Angle." The Action: Typing [--] or [---] makes the extrusion flair out (like a funnel) or point in (like a"  
[YouTube Link](https://youtube.com/watch?v=G2b59aYxkFI)  2026-02-07T18:00Z [---] followers, [---] engagements


"Only ONE Sketch Allowed Can You Model This Fusion [---] Challenge 3D Sketch Exercise: https://www.3dmechanism.com/post/3d-exercise-96 Support the channel: PayPal Donation: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this Fusion [---] CAD tutorial we focus on one of the most important foundations of sketching: Geometric Constraints Understanding constraints is what separates casual users from true CAD professionals. Beginners rely mostly on dimensions (numerical values) to control geometry. Experienced users apply constraints (geometric rules) first and use dimensions only to"  
[YouTube Link](https://youtube.com/watch?v=JXjVM8DZUiY)  2026-02-03T16:15Z [---] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-103 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: The primary tool for creating the main solid shape. How it works: Creates the base cylinder or disk. Best for: Creating the raw "stock material" (the metal disk) before you start machining details into it. [--]. Chamfer Definition: Cuts a flat angle (bevel) on sharp edges. How it works: The Difference: Unlike "Fillet" (which makes edges"  
[YouTube Link](https://youtube.com/watch?v=S_N4LtEKhiQ)  2026-01-29T16:00Z [---] followers, [----] engagements


"Fusion [---] Sheet Metal Practice Series Exercise #1 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-106 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Sheet Metal Rule (The Foundation) Definition: The "Master Settings" for your part. How it works: Crucial First Step: Before you draw anything you must select a rule (e.g. "Aluminum 2mm" or "Steel 14ga"). Why it matters: It defines the Thickness of the material and the K-Factor (how much the metal stretches when bent). If you change the rule later the entire 3D"  
[YouTube Link](https://youtube.com/watch?v=Z2C0Oc83VYc)  2026-02-08T16:00Z [---] followers, [----] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-02 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-86 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates a solid block from a sketch. How it works: Creates the central connection point or "Hub" of your design. Best for: The solid center plate or mounting bracket that holds everything together. [--]. Pipe Definition: Instantly creates a tube or solid rod along a path. How it works: The Advantage: You do not need to draw a circle and"  
[YouTube Link](https://youtube.com/watch?v=ZcsgLcc927M)  2026-01-28T16:01Z [---] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial Housing 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-107 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: The primary tool for creating the main solid shape. How it works: You sketch the profile of your bracket (e.g. an "L" shape) and pull it into a solid block. Best for: Creating the main walls or "skeleton" of the part. [--]. Rib Definition: Creates a thin wall or support web from an open sketch curve. How it works: The Magic: You do not"  
[YouTube Link](https://youtube.com/watch?v=d6hQXAOUfsY)  2026-02-11T01:00Z [---] followers, [---] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-05 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-95 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude What it is: The fundamental feature for building 3D solid geometry. How it works: You pick a closed sketch profile and extend it outward to add thickness and volume. Best used for: Forming the main structure of a part. [--]. Offset Plane (Construction) What it is: Generates a sketch plane parallel to an existing face but positioned at a defined"  
[YouTube Link](https://youtube.com/watch?v=exKCAsoIIk0)  2026-02-02T16:01Z [---] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-109 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates the main solid body. How it works: You sketch a profile (like a circle) and pull it into a cylinder. Best for: Creating the main reservoir or tank. [--]. Pipe Definition: Instantly creates a tube or rod along a sketch path. How it works: The Advantage: You do not need to draw a circle and "Sweep" it. You just draw a line (the path)."  
[YouTube Link](https://youtube.com/watch?v=fvwkhWO6b5Y)  2026-02-12T17:01Z [---] followers, [----] engagements


"Designing a Complete Cam Mechanism in Fusion [---] Base Follower Roller Assembly & Motion 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-108-cam-mechanism CSV FILE: https://drive.google.com/file/d/1rOGdFOxTgSDHZ7zpnvYxb5j9IANQZ1Xi/viewusp=sharing Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this video we design a complete Cam and Follower Mechanism from scratch in Fusion [---] including the base cam roller follower assembly and motion animation. You will learn how rotary motion is converted into linear motion using a disc cam and translating roller"  
[YouTube Link](https://youtube.com/watch?v=r5Iw28zuibM)  2026-02-11T17:01Z [---] followers, [----] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial RIB Feature 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-104 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Rib Definition: Creates a thin wall or web support from an open sketch curve. How it works: The Magic: You do not need to draw a closed triangle and extrude it. You just draw a single diagonal line floating in the air between two walls. The Action: The Rib tool automatically extends that line down and sideways until it hits the solid walls filling"  
[YouTube Link](https://youtube.com/watch?v=t_HbJv8Q180)  2026-01-30T17:01Z [---] followers, [----] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-04 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-94 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates the main spherical or dome body. How it works: You sketch an arc and a center line. Fusion spins it to create a solid dome. Best for: The base housing of the component. [--]. Shell Definition: Hollows out the body. How it works: Select the flat bottom face of the dome and set the wall thickness. Why do this now It is much easier"  
[YouTube Link](https://youtube.com/watch?v=vgt1BhqVS6s)  2026-02-01T15:01Z [---] followers, [---] engagements


"Autodesk Fusion - 2D SKETCH CHALLENGE [--] 3D Sketch : https://www.3dmechanism.com/post/2d-exercise-1 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 This is the single most important concept in Fusion [---]. If you master Sketches and Constraints you master the software. If you ignore constraints your models will "break" every time you try to change a dimension. [--]. The Sketch Definition: The 2D drawing that forms the foundation of every 3D object. The Golden Rule: Never try to draw perfectly. Draw the shape roughly then use Constraints to make it perfect. Blue Lines:"  
[YouTube Link](https://youtube.com/watch?v=yTKwkfXYsCc)  2026-02-09T16:30Z [---] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial [---] 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-113 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates the rough solid block or "clay" of your object. How it works: You sketch the outline (profile) and pull it into 3D. Best for: Establishing the overall size and shape of the part. [--]. Fillet Definition: Rounds off sharp corners. The Golden Rule: You must apply your major fillets to the outside of the solid block before you use the"  
[YouTube Link](https://youtube.com/watch?v=PYzU7ygJ8K0)  2026-02-16T16:00Z [---] followers, [----] engagements


"Fusion [---] Sheet Metal Practice Series Exercise #2 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-112 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. New Sheet Metal Rule (The Foundation) Definition: Defines the physical properties of the metal you are using. How it works: The Problem: You cannot just "draw" sheet metal. Steel bends differently than Aluminum. The Solution: You go to the Sheet Metal Rules library and create a New Rule. You define: Thickness: e.g. 1.5mm. K-Factor: How much the material"  
[YouTube Link](https://youtube.com/watch?v=Y8VwdJT3I9Q)  2026-02-15T17:00Z [---] followers, [----] engagements


"Sketch to 3D Print in Fusion [---] Self-Locking Towel Hanger 3D Sketch and 3d Model : https://www.3dmechanism.com/post/fusion-for-3d-printing-project-03-self-locking-towel-hanger Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 Makerworld: https://makerworld.com/pt/models/2227290-heavy-duty-wall-hook-fusion-3d-printing-project#profileId-2422799 In this Fusion [---] tutorial youll learn the complete design-to-manufacturing workflow starting from a simple sketch moving through 3D modeling and finishing with a real 3D printed object. This tutorial is perfect for makers"  
[YouTube Link](https://youtube.com/watch?v=jWBG1ws6pwY)  2026-02-14T17:01Z [---] followers, [----] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial [---] 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-110 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates the primary solid shape. How it works: You sketch the profile of your bracket (usually an "L" shape or a "T" shape) and pull it into a solid block. Best for: Creating the main load-bearing walls or "skeleton" of the part. [--]. Rib Definition: Creates a thin wall or support web from an open sketch curve. How it works: The"  
[YouTube Link](https://youtube.com/watch?v=F5n84F35ljk)  2026-02-13T19:00Z [---] followers, [----] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-109 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates the main solid body. How it works: You sketch a profile (like a circle) and pull it into a cylinder. Best for: Creating the main reservoir or tank. [--]. Pipe Definition: Instantly creates a tube or rod along a sketch path. How it works: The Advantage: You do not need to draw a circle and "Sweep" it. You just draw a line (the path)."  
[YouTube Link](https://youtube.com/watch?v=fvwkhWO6b5Y)  2026-02-12T17:01Z [---] followers, [----] engagements


"Designing a Complete Cam Mechanism in Fusion [---] Base Follower Roller Assembly & Motion 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-108-cam-mechanism CSV FILE: https://drive.google.com/file/d/1rOGdFOxTgSDHZ7zpnvYxb5j9IANQZ1Xi/viewusp=sharing Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this video we design a complete Cam and Follower Mechanism from scratch in Fusion [---] including the base cam roller follower assembly and motion animation. You will learn how rotary motion is converted into linear motion using a disc cam and translating roller"  
[YouTube Link](https://youtube.com/watch?v=r5Iw28zuibM)  2026-02-11T17:01Z [---] followers, [----] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial Housing 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-107 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: The primary tool for creating the main solid shape. How it works: You sketch the profile of your bracket (e.g. an "L" shape) and pull it into a solid block. Best for: Creating the main walls or "skeleton" of the part. [--]. Rib Definition: Creates a thin wall or support web from an open sketch curve. How it works: The Magic: You do not"  
[YouTube Link](https://youtube.com/watch?v=d6hQXAOUfsY)  2026-02-11T01:00Z [---] followers, [---] engagements


"Autodesk Fusion - 2D SKETCH CHALLENGE [--] 3D Sketch : https://www.3dmechanism.com/post/2d-exercise-1 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 This is the single most important concept in Fusion [---]. If you master Sketches and Constraints you master the software. If you ignore constraints your models will "break" every time you try to change a dimension. [--]. The Sketch Definition: The 2D drawing that forms the foundation of every 3D object. The Golden Rule: Never try to draw perfectly. Draw the shape roughly then use Constraints to make it perfect. Blue Lines:"  
[YouTube Link](https://youtube.com/watch?v=yTKwkfXYsCc)  2026-02-09T16:30Z [---] followers, [---] engagements


"Fusion [---] Sheet Metal Practice Series Exercise #1 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-106 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Sheet Metal Rule (The Foundation) Definition: The "Master Settings" for your part. How it works: Crucial First Step: Before you draw anything you must select a rule (e.g. "Aluminum 2mm" or "Steel 14ga"). Why it matters: It defines the Thickness of the material and the K-Factor (how much the metal stretches when bent). If you change the rule later the entire 3D"  
[YouTube Link](https://youtube.com/watch?v=Z2C0Oc83VYc)  2026-02-08T16:00Z [---] followers, [----] engagements


"Taper Angle Challenge 🔥 The Shell Trick That Makes It Work Fusion [---] Catics 3D02-05 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-100 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude (with Taper Angle) Definition: Creates a 3D shape that gets wider or narrower as it grows rather than having straight vertical walls. How it works: The Input: In the Extrude menu you will see a small box for "Taper Angle." The Action: Typing [--] or [---] makes the extrusion flair out (like a funnel) or point in (like a"  
[YouTube Link](https://youtube.com/watch?v=G2b59aYxkFI)  2026-02-07T18:00Z [---] followers, [---] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D02-04 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-98 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates the main cylindrical shape of the wheel. How it works: You sketch the cross-section of the rim (the "barrel" where the tire sits) and spin it [---]. Best for: The outer rim barrel and the central hub. [--]. Offset Plane Definition: Creates a sketching surface away from the origin. How it works: The Problem: The face of a car wheel"  
[YouTube Link](https://youtube.com/watch?v=2sidABvFs4o)  2026-02-06T16:00Z [---] followers, [----] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D02-03 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-98 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates a cylinder or profiled shaft by spinning a sketch. How it works: You sketch the cross-section of the shaft (including steps for bearings or gears) and spin it [---]. Best for: Creating the main "Stock Material" of the shaft. [--]. Offset Plane Definition: Creates a sketching canvas parallel to an existing plane but at a specific"  
[YouTube Link](https://youtube.com/watch?v=EffP66_eIf4)  2026-02-05T16:00Z [---] followers, [----] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D02-02 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-97 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates a cylinder or ring by spinning a profile. How it works: You sketch the cross-section of a hub or bearing housing and spin it [---]. Best for: Creating the round "Head" of a part. Why Multi-Body You set the Operation to "New Body" so it stays separate from everything else for now. [--]. Extrude Definition: Pulls a sketch into a solid"  
[YouTube Link](https://youtube.com/watch?v=5LTpDnjx60k)  2026-02-04T16:15Z [---] followers, [----] engagements


"Only ONE Sketch Allowed Can You Model This Fusion [---] Challenge 3D Sketch Exercise: https://www.3dmechanism.com/post/3d-exercise-96 Support the channel: PayPal Donation: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this Fusion [---] CAD tutorial we focus on one of the most important foundations of sketching: Geometric Constraints Understanding constraints is what separates casual users from true CAD professionals. Beginners rely mostly on dimensions (numerical values) to control geometry. Experienced users apply constraints (geometric rules) first and use dimensions only to"  
[YouTube Link](https://youtube.com/watch?v=JXjVM8DZUiY)  2026-02-03T16:15Z [---] followers, [---] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-05 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-95 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude What it is: The fundamental feature for building 3D solid geometry. How it works: You pick a closed sketch profile and extend it outward to add thickness and volume. Best used for: Forming the main structure of a part. [--]. Offset Plane (Construction) What it is: Generates a sketch plane parallel to an existing face but positioned at a defined"  
[YouTube Link](https://youtube.com/watch?v=exKCAsoIIk0)  2026-02-02T16:01Z [---] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Modeling Tutorial #04 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-4 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates a solid ring or cylinder. How it works: You sketch a cross-section (like a rectangle standing up) and a center axis. Fusion spins it [---]. Best for: Creating the main body of the collar or pulley. Why not Extrude Revolve is better because you can easily add "chamfers" or complex grooves into the sketch profile itself"  
[YouTube Link](https://youtube.com/watch?v=EMOr1bXCaDA)  2026-02-01T20:00Z [---] followers, [---] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-04 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-94 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Revolve Definition: Creates the main spherical or dome body. How it works: You sketch an arc and a center line. Fusion spins it to create a solid dome. Best for: The base housing of the component. [--]. Shell Definition: Hollows out the body. How it works: Select the flat bottom face of the dome and set the wall thickness. Why do this now It is much easier"  
[YouTube Link](https://youtube.com/watch?v=vgt1BhqVS6s)  2026-02-01T15:01Z [---] followers, [---] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-03 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-93 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates the main solid shape. How it works: You sketch the side profile of your device (like a drill handle) and pull it into a solid block. Best for: Creating the rough "clay model" of your product. [--]. Fillet Definition: Rounds off sharp edges. How it works: Crucial Step: You must apply the major fillets to the outside of your solid"  
[YouTube Link](https://youtube.com/watch?v=B3FKlC_6YMI)  2026-01-31T16:00Z [---] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial RIB Feature 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-104 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Rib Definition: Creates a thin wall or web support from an open sketch curve. How it works: The Magic: You do not need to draw a closed triangle and extrude it. You just draw a single diagonal line floating in the air between two walls. The Action: The Rib tool automatically extends that line down and sideways until it hits the solid walls filling"  
[YouTube Link](https://youtube.com/watch?v=t_HbJv8Q180)  2026-01-30T17:01Z [---] followers, [----] engagements


"Fusion [---] From Zero Beginner Step-by-Step Tutorial 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-103 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: The primary tool for creating the main solid shape. How it works: Creates the base cylinder or disk. Best for: Creating the raw "stock material" (the metal disk) before you start machining details into it. [--]. Chamfer Definition: Cuts a flat angle (bevel) on sharp edges. How it works: The Difference: Unlike "Fillet" (which makes edges"  
[YouTube Link](https://youtube.com/watch?v=S_N4LtEKhiQ)  2026-01-29T16:00Z [---] followers, [----] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-02 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-86 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: Creates a solid block from a sketch. How it works: Creates the central connection point or "Hub" of your design. Best for: The solid center plate or mounting bracket that holds everything together. [--]. Pipe Definition: Instantly creates a tube or solid rod along a path. How it works: The Advantage: You do not need to draw a circle and"  
[YouTube Link](https://youtube.com/watch?v=ZcsgLcc927M)  2026-01-28T16:01Z [---] followers, [---] engagements


"Can You Model This Fusion [---] Challenge - Catics 3D01-01 3D Sketch : https://www.3dmechanism.com/post/3d-exercise-67 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: The primary tool for creating the main solid shape. How it works: You sketch the profile of your device and pull it into 3D. Best for: Creating the raw "block" or outer boundary of your part. [--]. Mirror Definition: Creates a symmetrical copy of a Body or Feature. How it works: Efficiency: Instead of drawing a complex left and right side"  
[YouTube Link](https://youtube.com/watch?v=DRV-f3tIMro)  2026-01-27T16:00Z [---] followers, [----] engagements


"Fusion [---] From Zero Beginner Step-by-Step Modeling Tutorial #03 Exercise - [--] 3D Sketch : https://www.3dmechanism.com/post/3d-cad-exercise-3 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: Revolve Definition: Creates a 3D solid or surface by sweeping a sketch profile around a central axis. How it works: Profile: You draw the cross-section of your object. Imagine slicing a chess piece or a car wheel in half verticallythat cut face is your profile. Axis: You select a line (usually a center construction line) to act as the"  
[YouTube Link](https://youtube.com/watch?v=Ffwp7eRRBWQ)  2026-01-26T16:00Z [---] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Modeling Tutorial #02 Exercise - [--] 3D Sketch : https://www.3dmechanism.com/post/3d-cad-exercise-2 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this CAD tutorial we'll use the features: [--]. Extrude Definition: The primary tool for giving thickness to a 2D sketch. How it works: New Body: You select a closed profile (like a rectangle) and pull it to create a solid block. Cut: If you pull the profile into an existing solid it automatically switches to "Cut" mode to remove material (like cutting a window). Best for:"  
[YouTube Link](https://youtube.com/watch?v=uA4rErszOFQ)  2026-01-25T16:01Z [--] followers, [---] engagements


"Fusion [---] From Zero Beginner Step-by-Step Modeling Tutorial #01 Exercise - [--] 3D Sketch : hhttps://www.3dmechanism.com/post/3d-cad-for-beginners-exercise-1 Donate PayPal: https://www.paypal.com/donate/hosted_button_id=2U2K7FGZNC7N8 In this video you will create your very first 3D model in Autodesk Fusion (formerly Fusion 360). If you are an absolute beginner and have never used CAD software before this tutorial is for you. We will go through the basics step-by-step sketching and turning 2D drawings into 3D objects. In this CAD tutorial we'll use the features: Extrude Definition: Converts a 2D"  
[YouTube Link](https://youtube.com/watch?v=kriyqsimsRs)  2026-01-24T17:01Z [--] followers, [---] engagements

Limited data mode. Full metrics available with subscription: lunarcrush.com/pricing