@dustylumberco The Dusty Lumber Co
The Dusty Lumber Co posts on YouTube about maker, tools, diy, jeep the most. They currently have [---------] followers and [---] posts still getting attention that total [-------] engagements in the last [--] hours.
Engagements: [-------] #
- [--] Week [---------] +74%
- [--] Month [----------] -11%
- [--] Months [-----------] +104%
- [--] Year [-----------] -40%
Mentions: [--] #
- [--] Month [---] -15%
- [--] Months [---] +48%
- [--] Year [---] +162%
Followers: [---------] #
- [--] Week [---------] no change
- [--] Month [---------] +0.25%
- [--] Months [---------] +1.50%
- [--] Year [---------] +2.80%
CreatorRank: [------] #
Social Influence
Social category influence automotive brands 4.05% countries 2.31%
Social topic influence maker #455, tools #969, diy 4.05%, jeep 4.05%, bit #251, garage 2.89%, the first 2.31%, in the 2.31%, glue 1.73%, the new 1.73%
Top accounts mentioned or mentioned by @amazingwood2086 @festoolcanada @woodart7170 @dickindustriesinc @toolgrid @kingcanadainc @einhellcanada @milwaukeetool @artecindustries @titebond @festool @southlandtrailers @northridgenation @stihlcanada @feldergrouptv @nachooffroadlighting @osmocanada @tmrcustoms @bluecollarsuperstore @northmenguild
Top Social Posts
Top posts by engagements in the last [--] hours
"Using the Freud lock miter shaper cutter to make some [---] x [---] walnut posts #freudtoolsambassador"
YouTube Link 2024-06-19T14:14Z 4M followers, 18M engagements
"Freud finger joint bit and I definitely used way too much glue #freudtoolsambassador #woodworking"
YouTube Link 2023-08-26T13:23Z 4M followers, 215.6M engagements
"Adding [--] degree accent chamfers with a Freud bit with top bearing #freudtoolsambassador #woodwork"
YouTube Link 2024-02-09T14:08Z 4M followers, 2.4M engagements
"Swapping out the SCM slide saw and upgrading to the @FELDERGROUPTV K945S"
YouTube Link 2026-02-10T01:31Z 4M followers, 162.9K engagements
"Quick cut and trim with @festool-canada tools to get the repair piece fitting right"
YouTube Link 2026-01-13T14:10Z 4M followers, 2.2M engagements
"Radial arms saws are amazing woodwork tools. Just make sure to be careful #woodworking #maker #tools"
YouTube Link 2023-11-26T14:39Z 4M followers, 5M engagements
"Using the @festool-canada CSC SYS [--] cordless table saw to cut tenons in some 5x5s"
YouTube Link 2025-01-17T14:15Z 4M followers, 275.7K engagements
"Sliding dovetail joints #woodwork #woodworking #maker #wood #tools #bois #holz #madera #joinery"
YouTube Link 2023-02-28T13:19Z 4M followers, 468.4K engagements
"The new RSC [--] Festool reciprocating saw #woodwork #tools #festool #maker"
YouTube Link 2023-10-28T18:07Z 4M followers, 1.9M engagements
"Check out this wide belt SCM sander #tools #woodworking #maker #wood #carpentry"
YouTube Link 2023-10-27T15:05Z 4M followers, 97.9K engagements
"Time for a wider [--] King jointer so I can joint bigger stock #woodworking #tools #maker"
YouTube Link 2024-05-05T13:00Z 4M followers, 3.7M engagements
"Clean cutting Diablo 1/2 radius cove bit #diablotoolsambassador #woodworking #tools"
YouTube Link 2024-05-22T12:52Z 4M followers, 796.5K engagements
"This [--] degree Freud chamfer bit adds a nice touch to projects #freudtoolsambassador #woodworking"
YouTube Link 2024-06-06T12:16Z 4M followers, 2.8M engagements
"Cutting grooves with a router and jig #woodworking #joinery #router #festool"
YouTube Link 2024-08-03T14:57Z 4M followers, 1.5M engagements
"Hand tool joinery #woodworking #tools #joinery #carpentry #diy #wood #bois #madera #holz #woodwork"
YouTube Link 2023-08-16T13:33Z 4M followers, 35.3M engagements
"Breadboards with the @kingcanadatool drill press and mortiser then glued with @titebondproducts"
YouTube Link 2025-11-03T13:34Z 4M followers, 3.4M engagements
"How to make castle joints on a table saw Dusty demonstrates how to make castle joints on a table saw For more woodwork videos subscribe to our channel Dusty gives step by step instructions on how to build as well as woodworking tips and tricks and tool reviews Links to tools Dusty uses: Makita track saw with 5' track: https://amzn.to/2VRj46j Makita 10' track for track saw: https://amzn.to/31n0JPq Makita track saw clamps: https://amzn.to/2MPkgmp Makita 6" sander: https://amzn.to/2OXvOXm Makita cordless planer: https://amzn.to/2nTyE4C Makita cordless trim router: https://amzn.to/2IX75P8 Makita"
YouTube Link 2019-10-25T21:29Z 4M followers, 864.4K engagements
"Filling holes & cracks with filler and sanding down with the Festool ETSC [--] [---] cordless sander"
YouTube Link 2026-02-09T14:23Z 4M followers, 76.7K engagements
"Applying the first coat of @OsmoCanada amber polyx-oil to the vanity base"
YouTube Link 2025-04-17T13:22Z 4M followers, 85.8K engagements
"Grabbed the @festool-canada OF [----] router and OF-FH guide to cut some edge mortises"
YouTube Link 2025-04-30T13:17Z 4M followers, 845.8K engagements
"Wedged tongue & groove set for strong self aligning glue joints #freudtoolsambassador #woodworking"
YouTube Link 2023-12-20T14:00Z 4M followers, 1.9M engagements
"Grabbed the @festool-canada TPC [--] level 10screws a winch an idea and installed the stairs"
YouTube Link 2025-08-14T13:33Z 4M followers, 9.1M engagements
"Putting a round over on some of the table components with the @festool-canada MFK [---] edge router"
YouTube Link 2026-02-11T13:45Z 4M followers, 66K engagements
"Unclamp joint one side on the @KINGCANADAINC jointer trim on the bandsaw then plane to final"
YouTube Link 2026-01-13T19:46Z 4M followers, 98.3K engagements
"Put the @bowproducts XT Xtender fence on the Festool CSC SYS [--] to rip some [--] black ash"
YouTube Link 2025-04-14T12:46Z 4M followers, 268.1K engagements
"Getting the rear axle and suspension installed in the Gladiator Work on the Gladiator in the @Toolgrid garage continues as @dickindustriesinc and I get the @RockJock4x4byJohnCurrie suspension components in lift the beefed up axle with the @ArtecIndustries truss into place install the @FalconPerformanceShocks and swap out the stock diff cover for the much stronger @artecindustries diff cover and install the @rockjock4x4 steady bearing spacer so we can hook the drive shaft back up with @einhellcanada and @MilwaukeeTool"
YouTube Link 2025-09-18T12:43Z 4M followers, 13.6M engagements
"One of the table feet decided to crack so had to do some repairs with the Festool DOMINO DF 700"
YouTube Link 2026-02-04T14:14Z 4M followers, 1.7M engagements
"This SCM Nova SI [---] is a big saw but still capable of making precise cuts on smaller pieces"
YouTube Link 2024-04-16T13:46Z 4M followers, 30.5M engagements
"Using the @festool-canada DOMINO XL DF [---] to get this countertop ready for glue up"
YouTube Link 2025-04-15T14:57Z 4M followers, 1.6M engagements
"Getting the @FELDERGROUPTV K945S unboxed and ready for the tech to come set up and tune 👍"
YouTube Link 2026-02-10T13:57Z 4M followers, 645.7K engagements
"Making door pieces"
YouTube Link 2021-12-26T14:13Z 4M followers, 712K engagements
"Heres a handy tool The @TMRCUSTOMS Machete rod & flat bar bender Bends & shapes metal like dream"
YouTube Link 2026-02-12T14:05Z 4M followers, 152.3K engagements
"Combo joint - half lap wedged mortise and tenon #woodworking #joinery #tools"
YouTube Link 2024-07-08T13:48Z 4M followers, 8.2M engagements
"Hooked onto the @southlandtrailers tilt deck to go pick up a bunch part for the next Jeep build 👍"
YouTube Link 2026-02-14T14:27Z 4M followers, 27.4K engagements
"The reversible glue joint cutter from Freud #freudtoolsambassador #woodworking #joinery"
YouTube Link 2023-10-18T12:17Z 4M followers, 3.3M engagements
"New project starting using the @festool-canada TS [--] to get these [---] slabs cut to size"
YouTube Link 2025-10-04T14:24Z 4M followers, 1.1M engagements
"Interlocking mortise & tenon joint #woodwork #ad #woodworking #wood #bois #joinery #holz #madera"
YouTube Link 2022-11-10T13:53Z 4M followers, 1.9M engagements
"A cool feature about the @festool-canada MB [--] drill guide is the horizontal drill attachment"
YouTube Link 2025-10-16T14:18Z 4M followers, 220.6K engagements
"Box joint with a shaper and groove cutter #woodworking #tools #maker #woodwork"
YouTube Link 2023-12-08T16:49Z 4M followers, 3.2M engagements
"Upgrading from the stock bumper to a high clearance @ArtecIndustries Bantam bumper Upgrading from the stock Jeep bumper to an @ArtecIndustries high clearance Bantam bumper in the @Toolgrid garage today with @dickindustriesinc Had to chop some of the frame off the the @MilwaukeeTool recip saw to get the bumper closer to the JT giving a better approach angle. Got the @nacho_offroadlighting grandes mounted back in and Ive got a winch coming from @northridgenation soon and will get it in once it gets here"
YouTube Link 2026-02-10T18:15Z 4M followers, 267K engagements
"Very cool [--] axis SCM woodwork machine #woodworking #maker #tools #wood #cnc"
YouTube Link 2023-11-28T21:58Z 4M followers, 2M engagements
"Using the @festool-canada CSC SYS [--] to cut some big walnut tenons for the table base"
YouTube Link 2025-10-07T12:20Z 4M followers, 9.5M engagements
"Some @Titebond Instant Bond a template and a Festool router for some clean tenons"
YouTube Link 2026-01-24T13:37Z 4M followers, 440.8K engagements
"Assembling tuning and testing the new Felder K945S slide saw Yesterday Jonathan from @FELDERGROUPTV flew all the way out from Ontario to come assemble fine tune and test the new Felder K945S slide table saw Jonathan has been putting together and commissioning Felder equipment for the past [--] year and this guy knows what hes doing and knows how to work Very efficient and knows the Felder machines inside and out My last three slide saws I assembled myself but with the Felder and the additional electrical components PCS system and digital dials I wanted to have one of the Felder techs come and"
YouTube Link 2026-02-13T14:56Z 4M followers, 22.5K engagements
"New drill press table"
YouTube Link 2022-01-18T12:58Z 4M followers, 481.8K engagements
"Test fitting each tread before moving on to final assembly and glue up"
YouTube Link 2026-01-28T22:05Z 4M followers, 61.1K engagements
"Setting up the rest of the top section of the mobile tool kart with the @Toolgrid system"
YouTube Link 2026-02-02T14:12Z 4M followers, 51K engagements
"Quick pass over the @KINGCANADAINC jointer to get one side flat then through the planer then glue"
YouTube Link 2026-01-25T14:04Z 4M followers, 83.9K engagements
"The next Gladiator upgrade from @northridgenation is an @overlandvehiclesystems1700 truck cap"
YouTube Link 2026-01-15T14:12Z 4M followers, 959.8K engagements
"Cutting round over edges on the foot pads with the @KINGCANADAINC shaper"
YouTube Link 2026-02-08T14:30Z 4M followers, 76.5K engagements
"Cutting walnut half laps with the @KINGCANADAINC radial arm saw for the table base pieces"
YouTube Link 2026-01-30T13:27Z 4M followers, 74.4K engagements
"The Freud convex radius cutter #freudtoolsambassador #woodworking #tools"
YouTube Link 2024-05-21T12:15Z 4M followers, 2.4M engagements
"Stabilizing some cracks on table foot pads with the @festool-canada OF-FH router guide"
YouTube Link 2026-02-05T18:01Z 4M followers, 114.6K engagements
"Using the @festool-canada CSC SYS [--] to cut some crack stabilizing inlays for the table foot pads"
YouTube Link 2026-02-06T14:14Z 4M followers, 832.8K engagements
"Incredibly handy tool The @TMRCUSTOMS Grizzly tube notcher is quick efficient and well designed"
YouTube Link 2026-01-20T11:54Z 4M followers, 229.8K engagements
"Switching the spindle for a router but collet #woodwork #maker #shorts #woodworking #tools #diy"
YouTube Link 2022-06-15T13:04Z 4M followers, 118.2K engagements
"Cutting some big [--] walnut foot pad pieces for the conference table with the @KINGCANADAINC RAS"
YouTube Link 2026-02-02T16:13Z 4M followers, 85.8K engagements
"Round bit square holes #woodwork #woodworking #maker #tools #shorts #wood #joinery #work"
YouTube Link 2022-07-10T13:53Z 4M followers, 799.2K engagements
"Testing a profile idea for the table base foot pads with the @festool-canada OF [----] router"
YouTube Link 2026-02-03T14:06Z 4M followers, 75.9K engagements
"Need to cut 2x12s for the stairs so I grabbed the @festool-canada HK [--] & FSK [---] track 👍"
YouTube Link 2025-06-26T13:27Z 4M followers, 244K engagements
"Blowing snow off the German car and Canadian driveway with the German @STIHLCanada cordless blower"
YouTube Link 2026-01-28T15:50Z 4M followers, 62.6K engagements
"Making progress on the go kart this Saturday with Brigs Back in the @Toolgrid garage making progress on the @GoKartGod go kart with Brigs welding on the floor panels with the @froniuscanada5673 welder on the @stronghandtools bench from @bluecollarsuperstore"
YouTube Link 2026-02-01T00:10Z 4M followers, 41.1K engagements
"This is the new @festool-canada MB [--] drill guide"
YouTube Link 2025-09-28T13:20Z 4M followers, 117K engagements
"Making the switch from 37s to 40s Decided to move up with [--] @mickeythompsontires Baja Boss and [--] @bajabuiltwheels from @northridgenation and Im digging it Right away @dickindustriesinc and I took them out for a little test Do you want else is rad is that @MilwaukeeTool digital torque wrench/ratchet @Toolgrid This video contains music from Shutterstock licensed by Splice video editing app"
YouTube Link 2026-02-05T14:20Z 4M followers, 54.1K engagements
"@Titebond SpeedSet which is their fastest setting wood glue so I can quickly get back to work"
YouTube Link 2025-01-27T14:50Z 4M followers, 507.4K engagements
"Getting started organizing the top of a mobile tool kart with the @Toolgrid system"
YouTube Link 2026-01-25T16:13Z 4M followers, 111.2K engagements
"Check out this cool combo machine Its the SCM FS [--] C jointer planer #woodworking #tools"
YouTube Link 2023-12-08T15:43Z 4M followers, 328.4K engagements
"A quick inlay trim on the @festool-canada CSC SYS [--] then fill the crack and sand with the ETS 150"
YouTube Link 2026-02-07T15:53Z 4M followers, 116.9K engagements
"The best tool for reclaimed wood This tool is the best I have found for working with reclaimed wood. You can get it at www.restorertools.com and if you use DUSTYLUMBER at checkout youll get 10% off Woodwork Woodworking Reclaimed wood Barnwood Tool Tools Tool review Pallet wood Distressed wood Barn board Woodwork Woodworking Reclaimed wood Barnwood Tool Tools Tool review Pallet wood Distressed wood Barn board Woodwork Woodworking Reclaimed wood Barnwood Tool Tools Tool review Pallet wood Distressed wood Barn board Woodwork Woodworking Reclaimed wood Barnwood Tool Tools Tool review Pallet wood"
YouTube Link 2021-04-28T14:06Z 4M followers, 33.3K engagements
"Precision cuts with a giant @MafellGermanycarpentry chainsaw"
YouTube Link 2026-01-19T00:35Z 4M followers, 43.5K engagements
"Using the @festool-canada DOMINO DF [---] to help glue up a long section"
YouTube Link 2025-03-26T12:36Z 4M followers, 270.6K engagements
"Using the @festool-canada DOMINO [---] to cut slots for mounting the table top to the base"
YouTube Link 2026-01-27T13:29Z 4M followers, 106.9K engagements
"Using the @northmenguild chisels to make some final fitment adjustments"
YouTube Link 2026-01-29T14:07Z 4M followers, 139.8K engagements
"Building a massive kitchen island Full build video of a massive reclaimed wood kitchen island"
YouTube Link 2021-09-19T15:46Z 4M followers, 10.8M engagements
"An amazing thing about @festool-canada is how quickly you can set up & do precise and clean work"
YouTube Link 2026-01-15T15:25Z 4M followers, 150.7K engagements
"Decided I didnt like the shallow vessel sink so grabbed some @festool-canada to cut & change"
YouTube Link 2025-10-29T13:39Z 4M followers, 127.6K engagements
"Picking up the next Jeep JT build with the @southlandtrailers gooseneck Its been so fun building the first Gladiator I decided to get one more But I wanted a twin to the first one that was also a JT with the diesel and white. Some they dont make the diesel anymore they are a bit harder to find and this one I ended up finding in Quebec and has it shipped out here and today it arrived so I hooked onto the @s@southlandtrailersgooseneck and went and met up with the trucker to take delivery and bring it back to the shop. For now it looks like the first Gladiators little mini brother but once were"
YouTube Link 2026-01-16T13:45Z 4M followers, 38.3K engagements
"Another great way to cut these mortises is to use the @KINGCANADAINC chisel mortiser 👍"
YouTube Link 2025-10-25T12:53Z 4M followers, 422.7K engagements
"Needed a Brad nailer to install some panels and trim so I picked up the @einhellcanada 18v 👍"
YouTube Link 2025-05-15T13:29Z 4M followers, 160.4K engagements
"Nice evening to start refinishing a deck with the @festool-canada RG [---] and dust collection"
YouTube Link 2024-10-08T13:30Z 4M followers, 343.5K engagements
"Resawing some beams down to size"
YouTube Link 2025-11-16T22:30Z 4M followers, 29.5K engagements
"Cutting some stub tenons with the @whitehillspindletools combi cutter"
YouTube Link 2026-01-11T14:15Z 4M followers, 357.4K engagements
"The new @festool-canada Granat PROfile abrasive pads Will be available in stores on Nov 13th 👍"
YouTube Link 2025-10-30T12:33Z 4M followers, 100.4K engagements
"Jigsaw guide rail attachment #woodwork #woodworking #maker #wood #festool #tools #jigsaw #carvex"
YouTube Link 2023-02-02T22:58Z 4M followers, 140.1K engagements
"Trying out an idea using the @mantis.toolgrid vertical hooks to organize the Festool tracks"
YouTube Link 2026-01-01T15:37Z 4M followers, 384.9K engagements
"The @festool-canada extension table for the MW [----] mobile work bench for more work surface"
YouTube Link 2024-08-29T13:46Z 4M followers, 106.3K engagements
"Four way dovetail joint #ad #woodworking #woodwork #wood #maker #bois #tools #holz #joinery #madera"
YouTube Link 2022-10-18T12:19Z 4M followers, 434.7M engagements
"Moving the [--] Mercury 4x4 inside to start the build Moving the [----] Mercury 4x4 inside the #toolgridgarage with the @JCBNorthAmerica teleskid and between the @BendPak lift posts so @dickindustriesinc and I can get started taking it all apart and figuring out what parts we need to fix replace and upgrade and get the plan together for the build. @Toolgrid This video contains music from Shutterstock licensed by Splice video editing app"
YouTube Link 2025-11-11T13:41Z 4M followers, 28.3K engagements
"Radial arm saw and a dado set is such a good combo #woodworking #maker #tools"
YouTube Link 2024-03-24T21:03Z 4M followers, 600K engagements
"Cutting tenons with a Diablo dado set #diabloambassador #woodwork #maker #woodworking #tools #wood"
YouTube Link 2023-05-20T13:24Z 4M followers, 288.7K engagements
"How jointers work and why you also need a planer Explaining how jointers work and why you have to use a jointer and planer in order to get square and uniform boards to work with"
YouTube Link 2025-06-19T03:16Z 4M followers, 106.8K engagements
"Two more massive timber framing tools I saw at the show #woodworking #tools #maker #sawdust"
YouTube Link 2023-11-09T22:28Z 4M followers, 3.2M engagements
"Shaking out [--] years of dust and dirt and cleaning up with the @STIHLCanada cordless vac & blower"
YouTube Link 2025-11-23T15:03Z 4M followers, 54.1K engagements
"The old [--] getting some Botox work done @dickindustriesinc hammer and dolly working out wrinkles"
YouTube Link 2025-11-24T20:50Z 4M followers, 29K engagements
"Cutting tenons on the @KINGCANADAINC radial arm saw #woodworking"
YouTube Link 2024-12-31T14:39Z 4M followers, 11.1M engagements
"We added some of these @Juggernaut-Designs ratchet straps to my Jeep and @dickindustriesinc truck"
YouTube Link 2025-12-13T19:18Z 4M followers, 150.8K engagements
"Clearing out some half laps #woodworking #maker #tools #joinery #carpentry #diy"
YouTube Link 2023-10-26T20:07Z 4M followers, 55.1M engagements
"Setting up the first drawer in a mobile tool kart using the @Toolgrid system 👍"
YouTube Link 2025-12-04T14:06Z 4M followers, 61K engagements
"Attaching the top to the base #woodworker #woodwork #diy #carpentry #wood #bois #madera #holz"
YouTube Link 2023-06-08T13:10Z 4M followers, 224.1K engagements
"Pick up a Fein grinder from @ToolsToday and Im impressed I love German woodworking tools so I decided to try out some German Fein metal working tools which I picked up from @ToolsToday and Im quite impressed Did an awesome job cleaning the undercoating off the Jeep frame with the wire brush and then switching to the grinding pad to prep the steel so we can weld new control arm mounts on"
YouTube Link 2025-12-21T15:18Z 4M followers, 75.4K engagements
"Next step in the Gladiator build: improve departure angle with an @ArtecIndustries rear bumper Next step on the Gladiator in the @Toolgrid garage is to improve the departure angle by installing the @ArtecIndustries high clearance Bantam rear bumper and hitch relocate that puts the receiver behind the licence plate. @dickindustriesinc and I got to work with @MilwaukeeTool tools and got the stick bumper and hitch removed and rear panels ready for cutting"
YouTube Link 2026-01-06T16:46Z 4M followers, 120.2K engagements
"Big slab flattening bits need the big power of the @festool-canadaOF [----] router"
YouTube Link 2025-11-13T14:22Z 4M followers, 148.1K engagements
"Trimming the top to size with the @festool-canada TS [--] K track saw chewing though [--] of walnut"
YouTube Link 2025-11-19T14:18Z 4M followers, 159K engagements
"Needed a few more boards #woodworking #maker #diy #woodwork #sawmill #sawdust #work"
YouTube Link 2022-05-05T12:44Z 4M followers, 63.7K engagements
"Great day exploring some southern Alberta in the Jeep 👍 Great day exploring some of Alberta with my son and @dickindustriesinc with his [--] Land Cruiser with a [---] and Pete with his LS swapped LJ. We went out to an area where I used to ride dirt bikes a lot when I was in university but unfortunately a lot of the area has been shut down and tons of trails have been blocked and the trails that remain arent all open to Jeeps. So we did the best we could and tried to find trials we were allowed on. Some trails are clearly marked and others werent so we had to try figure it out as we went. Popped"
YouTube Link 2025-10-26T15:09Z 4M followers, 30.1K engagements
"Check out this cool Vari Angle shaper cutter from @whitehillspindletools"
YouTube Link 2025-12-04T14:20Z 4M followers, 254K engagements
"Starting the install of the @nacho_offroadlighting on the Gladiator Getting the @nacho_offroadlighting on the Gladiator If you havent figured it out yet @dickindustriesinc is a man of many talents Did such a clean job getting these installed so far Ive got a different front bumper coming so these are just mounted temporarily on the bumper for now. The lights up on the pillars will stay and we used the @ArtecIndustries mounts to get those ones in place. Just popped the screws out with the @einhellcanada drill and put in some spaces and put the supplied screws back in 👍"
YouTube Link 2025-10-26T17:52Z 4M followers, 58.6K engagements
"Slicing up a pine log"
YouTube Link 2021-10-10T13:42Z 4M followers, 239.4K engagements
"Theres nothing quite like like working with a sharp @SUIZAN chisel Theres nothing quite like working with a sharp @SUIZAN chisel. Once you have them sharp the key to keeping them sharp is very quick touch ups to keep the edge razor sharp. You can keep them sharp in several ways and there are several techniques which surprisingly is one the most argued about things in social media woodwork. At the end of the day just make sure the way you decide do it leaves you with a very sharp edge. For years Ive been using the @TormekSharpening T-8 with the diamond stone and the compound buffing wheel. You"
YouTube Link 2026-01-21T14:39Z 4M followers, 188K engagements
"Adding the @einhellcanada metal bandsaw and mitre stand to automotive side of the shop"
YouTube Link 2025-10-10T13:12Z 4M followers, 161.5K engagements
"The all new @festool-canada OF [----] router & some of the awesome accessories #festoolpartner"
YouTube Link 2025-02-19T14:37Z 4M followers, 77.2K engagements
"Organizing another drawer in the mobile tool kart with the @Toolgrid System 👍"
YouTube Link 2025-12-09T14:05Z 4M followers, 49.7K engagements
"Some @T@Titebond3 to get this side of mortise and tenons glued up 👍"
YouTube Link 2025-11-21T18:29Z 4M followers, 142.6K engagements
"Phase [--] starts with @dickindustriesinc using the @einhellcanada tools to remove the fuel tank"
YouTube Link 2025-12-17T13:07Z 4M followers, 42.7K engagements
"Thinning out dead brush & trees with the @STIHLCanada FSA [---] to make this section more usable This video contains music from Shutterstock licensed by Splice video editing app"
YouTube Link 2025-09-21T13:50Z 4M followers, 70.3K engagements
"The @WorkIQTools vice is one of the coolest and most versatile workshop vices out there"
YouTube Link 2025-12-08T14:10Z 4M followers, 97.5K engagements
"Got to see the new SCM blade off system today in Italy #woodworking #tools #maker #woodwork"
YouTube Link 2023-09-28T14:27Z 4M followers, 3.9M engagements
"The big @MafellGermany MKS [---] doing what it loves"
YouTube Link 2026-01-06T21:51Z 4M followers, 120.1K engagements
"Getting the @rockslideengineering5125 power steps installed on the Jeep Upgrading to the @rockslideengineering5125 power steps with the extra layer of armour. @dickindustriesinc did amazing work once again with the install using @einhellcanada power tools and @MilwaukeeTool hand tools all nicely organized with the @Toolgrid system 👍"
YouTube Link 2025-11-02T13:08Z 4M followers, 113.6K engagements
"Another good way to make tenons is with the @KINGCANADAINC table saw and a set of dado blades"
YouTube Link 2025-10-13T13:45Z 4M followers, 72.2K engagements
"Assembling a mortise and tenon clothes rack #woodwork #maker #woodworking #shorts #tools #joinery"
YouTube Link 2022-06-28T13:15Z 4M followers, 302.1K engagements
"Cutting mitered bridle joint with @SUI@SUIZANs and chisels"
YouTube Link 2025-11-26T13:45Z 4M followers, 96.8K engagements
"Building a window workbench Building a window workbench. Now Ill line the wall above the bench with @Toolgrid panels so I can organize more tools. Fun project with @MafellGermany @festool-canada @SUIZAN @OsmoCanada @amanatool @Titebond @KINGCANADAINC"
YouTube Link 2025-10-20T15:15Z 4M followers, 1.4M engagements
"Festool ETSC [---] is one of the most versatile sanders. Battery or cord and great angle attachment"
YouTube Link 2025-11-20T21:45Z 4M followers, 82.1K engagements
"Adding one more giant @Toolgrid banner to the north wall in the automotive section of the shop"
YouTube Link 2026-01-18T16:35Z 4M followers, 39.8K engagements
"Now to glue up with @Titebond [--] on the Barth workbench and some @BoraTool clamps on top"
YouTube Link 2025-12-15T14:52Z 4M followers, 515.1K engagements
"Being able to make dead straight [--] long bevel cuts is one of the reasons I love this SCM slide saw"
YouTube Link 2024-08-07T13:29Z 4M followers, 4.2M engagements
"Made a mistake on these stairs and will have to fix it"
YouTube Link 2025-08-13T13:59Z 4M followers, 1.3M engagements
"Making a custom control boxes mounting plate Check out this awesome mounting bracket idea @dickindustriesinc came up with for the @nacho_offroadlighting control boxes. Grabbed some spare aluminum and some @einhellcanada tools and got the holes and slot drilled and cut and then sanded on the @KINGCANADAINC sander and then mounted nicely on the Gladiator"
YouTube Link 2025-10-28T13:13Z 4M followers, 56.3K engagements
"Another way to cut in inlays is to use the @festool-canada OF [----] router"
YouTube Link 2026-01-22T11:25Z 4M followers, 63K engagements
"Heres a trick to cut a perfect glue joint with a @festool-canadatrack saw"
YouTube Link 2025-11-16T13:35Z 4M followers, 759.5K engagements
"Using the @festool-canada KS [--] track saw to get a perfectly straight cut to fit against the wall"
YouTube Link 2025-12-10T12:58Z 4M followers, 117.9K engagements
"Using the @festool-canada DOMINO XL joiner to secure the final piece on this end section"
YouTube Link 2025-02-25T13:20Z 3.9M followers, 46.1K engagements
"Heres Kyle from Northwest Coating now getting the frame of the [--] Mercury sandblasted 👍"
YouTube Link 2025-11-21T13:34Z 4M followers, 42.1K engagements
"The new TXS [--] Festool drill and attachments #woodworking #festool #tools"
YouTube Link 2023-10-12T17:52Z 4M followers, 597.8K engagements
"@festool-canada just released [--] new amazing cordless random orbit sanders The ETSC [--] [---] and 150"
YouTube Link 2025-06-19T15:02Z 4M followers, 116.1K engagements
"Making some pockets #woodwork #woodworking #wood #bois #holz #maker #tools #madera #joinery #fun"
YouTube Link 2022-12-01T15:58Z 4M followers, 263.2K engagements
"Very cool sign from @suizan_japan Ive been using their tools for years and love them"
YouTube Link 2025-12-22T14:07Z 4M followers, 115K engagements
"Kitchen island process"
YouTube Link 2021-08-08T17:04Z 4M followers, 6.1M engagements
"Using the @STIHLCanada REA [---] pressure washer to clean the underside before starting the build"
YouTube Link 2025-08-28T12:59Z 4M followers, 97.2K engagements
"Milling an old power pole Milling an old cedar power pole into pieces for a woodwork project"
YouTube Link 2021-06-29T21:57Z 4M followers, 21.1K engagements
"Found this big driveway gate in FB marketplace Found this big driveway gate on FB marketplace. The plan was to build one this summer but time got away from me and winter is coming so hooked onto the @southlandtrailers gooseneck and @dickindustriesinc went to pick it up and bring it back to the shop and then unloaded it with the @JCBNorthAmerica teleskid. The plan is still to build a big timberframe gateway over top but that will have to wait until spring"
YouTube Link 2025-11-19T14:27Z 4M followers, 45.5K engagements
"Getting the @gritautomation dust system set up with parts from King & @einhellcanada tools"
YouTube Link 2025-02-10T14:06Z 3.9M followers, 206.6K engagements
"Using the @Toolgrid system to set up this section of @MilwaukeeTool Using the @Toolgrid system to organize this section of @MilwaukeeTool Right now for Black Friday all the Toolgrid products are 20% off on their www.toolgridshop.com website 👍"
YouTube Link 2025-11-28T15:38Z 4M followers, 122K engagements
"Chisel sharpening #woodwork #woodworking #maker #shorts #wood #tools #chisel #work"
YouTube Link 2022-08-11T13:25Z 4M followers, 12.7M engagements
"Radial Arm Saw"
YouTube Link 2021-11-18T13:19Z 4M followers, 1.1M engagements
"Trimming down tenons with the @festool-canada slide saw & @KINGCANADAINC radial arm saw"
YouTube Link 2025-11-11T13:15Z 4M followers, 73.5K engagements
"Just had to try out this big @northmenguild corner chisel and mallet"
YouTube Link 2026-01-20T14:32Z 4M followers, 192.3K engagements
"Adding some threaded inserts and adjustable pegs with @festool-canada drills"
YouTube Link 2025-12-05T18:57Z 4M followers, 39.7K engagements
"Getting the @Shapertools set up and ready to go for all the inlays Ill be doing on this table"
YouTube Link 2026-01-14T16:21Z 4M followers, 305.4K engagements
"Finishing up the top. Some people dont like it when I do this and thats ok 👍"
YouTube Link 2025-12-25T22:24Z 4M followers, 462K engagements
"Adding solar panels to the @southlandtrailers with @dickindustriesinc @einhellcanada"
YouTube Link 2025-12-27T21:55Z 4M followers, 48K engagements
"Making the change to some @ArtecIndustries long arms Making the change to some @ArtecIndustries long arms. To do that @dickindustriesinc and I had to use some @einhellcanada tools to remove the short arms and grind off the factory brackets to prepare for the install of the Artec brackets"
YouTube Link 2025-12-18T21:35Z 4M followers, 48.3K engagements
"Set up the SCM Nova si [---] with three cut locations to cut tenons on these 6x6 timber pieces"
YouTube Link 2024-07-19T13:40Z 4M followers, 86.1K engagements
"Some Titebond CA glue to the rescue #woodworking #maker #glue"
YouTube Link 2024-07-27T13:28Z 4M followers, 195.4K engagements
"Island building"
YouTube Link 2021-12-04T18:32Z 4M followers, 1.1M engagements
"Second stair stringer going on with some @Titebond [--] to prevent squeaks & @BoraTool clamps"
YouTube Link 2025-08-11T13:19Z 4M followers, 7.4M engagements
"Today we start the [----] Mercury 3/4 ton 4x4 build Project [----] Mercury 4x4 is underway @dickindustriesinc and I grabbed some @einhellcanada power tools and WD [--] and some @MilwaukeeTool hand tools and got to work taking the front end apart in the @Toolgrid garage"
YouTube Link 2025-11-11T15:27Z 4M followers, 123.6K engagements
"Filling wood beam cracks #woodworker #woodwork #diy #carpentry #woodworking #bois #holz #madera"
YouTube Link 2023-06-28T12:59Z 4M followers, 18.3M engagements
"GARCA HARFUCH LE DA CALLADON DE BOCA A LPEZ DORIGA AMLO Andres Manuel Lopez Obrador Presidente de Mexico AMLO Andrs Manuel Lpez Obrador Presidente de Mxico Contacto personal: g.garcia_brandon@hotmail.com #amlo #mexico #poltica #cdmx #2024 #claudiasheinbaum #morena #presidente pri pan morena vicente fox felipe calderon maanera amlo amlo hoy mexico diputados senadores ine lorenzo cordova calderon ine claudia sheinbaum xochitl galvez maynez"
YouTube Link 2025-12-04T16:30Z 846K followers, 127.3K engagements
"Pulled out the @festool-canada KSC [--] mitre saw and CTC MIDI I to cut some [--] black ash"
YouTube Link 2025-04-14T14:50Z 4M followers, 146.7K engagements
"To fasten the workbench top I used the @festool-canadaCXS [--] drill and several attachments"
YouTube Link 2025-12-20T13:18Z 4M followers, 188.7K engagements
"Adding some @northridgenation art to the shop Great company that will be a big part of the builds"
YouTube Link 2026-01-17T14:08Z 4M followers, 48.1K engagements
"Reversible glue line cutter #woodworking #woodwork #wood #maker #bois #tools #holz #joinery #madera"
YouTube Link 2022-10-15T17:56Z 4M followers, 13.9M engagements
"Installing the new @ArtecIndustries rear long arms on the Gladiator Installing the rear @ArtecIndustries long arms with @dickindustriesinc was a good time Ground the welds and then hammered off the stock mounts off and then welded on the new ones with the @bluecollarsuperstore miller welder and the ln we could install the new long arm Better ride and more articulation"
YouTube Link 2025-12-22T15:24Z 4M followers, 57.8K engagements
"To reduce frustration start all solid woodwork projects on a jointer like this @KINGCANADAINC"
YouTube Link 2025-09-09T12:07Z 4M followers, 86.8K engagements
"Using the @festool-canada OF [----] & chip guide to cut a [--] chamfer on the tool bench top"
YouTube Link 2024-12-18T14:25Z 4M followers, 82.2K engagements
"Checking out the IT [--] shaper at the SCM tech center #woodworking #tools #maker #wood"
YouTube Link 2023-10-01T13:16Z 4M followers, 214.4K engagements
"These @festool-canada forster bits with the center drill bit are awesome for drilling on angles"
YouTube Link 2025-09-16T12:41Z 4M followers, 286.6K engagements
"Giant coffee table build start to finish Giant reclaimed wood coffee table build start to finish"
YouTube Link 2022-04-10T17:23Z 4M followers, 9.3M engagements
"Using the @festool-canada DOMINO [---] to get these knee braces ready for glue up"
YouTube Link 2025-12-14T13:47Z 4M followers, 107.3K engagements
"How to use a Festool Domino Jointer If youve never used a @festool-canada DOMINO jointer before heres how they work and why theyre such amazing tools"
YouTube Link 2025-11-17T18:38Z 4M followers, 27.1K engagements
"With the first sides flat I can run them through the planer to get them to identical thicknesses"
YouTube Link 2025-11-15T13:42Z 4M followers, 86.9K engagements
Limited data mode. Full metrics available with subscription: lunarcrush.com/pricing