@BCRUK Avatar @BCRUK BCR

BCR posts on YouTube about road, cycle, service, $7309t the most. They currently have [------] followers and [--] posts still getting attention that total [-----] engagements in the last [--] hours.

Engagements: [-----] #

Engagements Line Chart

Mentions: [--] #

Mentions Line Chart

Followers: [------] #

Followers Line Chart

CreatorRank: [---------] #

CreatorRank Line Chart

Social Influence

Social category influence finance 10.99% technology brands 1.1% social networks 1.1% automotive brands 1.1%

Social topic influence road 21.98%, cycle 21.98%, service 20.88%, $7309t #103, how to 18.68%, diy 13.19%, build 8.79%, tools 7.69%, frame 6.59%, clean 6.59%

Top Social Posts

Top posts by engagements in the last [--] hours

"How to Install Shimano Toggle Link Front Derailleurs (R7000/R8000/R9100) In this video I show the correct installation and setup of Shimano Toggle Link front derailleurs. This design catches a lot of people outespecially cable routing and tension. Follow the pro method for consistent rub-free shifting. Sponsor: Big thanks to Sport and Leisure for supporting the channel. Get 10% off your order here: https://www.sportandleisure.com/bcr (Discount automatically applied at checkout) Tools I use-"
YouTube Link 2026-02-11T17:01Z 17.2K followers, [----] engagements

"This 90s Kona Kilauea Might Be Beyond Saving. This week we have a true icon in the stand: a [----] Kona Kilauea. Back in the day this Tange Prestige steel frame was the stuff of dreams. But after [--] years this one was tired. The chain was badly worn the cables were shot and the original wheels had seen much better days. The customers brief: To get this retro legend off-road worthy again. But it wasn't a simple service. I ran into a major issue with the wheels (finding decent 26" rims is harder than you think) and a compatibility nightmare between the Suntour XC Pro shifters and the Shimano"
YouTube Link 2026-02-14T19:57Z 17.2K followers, [----] engagements

"Full Gravel Bike Build from Scratch GRX 1x Workshop Build This video is a full gravel bike build from a bare frame built up with Shimano GRX parts and some minty DT wheels Some parts are brand new others are removed-from-new components to keep costs sensible. I also try a few 3D-printed tools along the way. Whats covered in this build Bottom bracket shell facing on a new frame Fork cutting and headset setup Internal hose and cable routing Shimano GRX 1x drivetrain installation Brake hose cutting and bleeding Gear setup limit screws and B-tension Disc brake alignment and bedding in Saddle"
YouTube Link 2026-01-10T17:01Z 17.2K followers, 16K engagements

"Most Riders Dont Know These Exist GRX Sub Lever Install Installing Shimano GRX sub levers (BL-RX812) the hidden brake levers most riders dont know about. These inline hydraulic levers mount on the tops of your bars and let you brake while riding upright. In this video I show you how to install them step-by-step how to route hoses cleanly and how to get them bled and working perfectly. If youve ever wanted extra braking positions for gravel or endurance rides this is one of the easiest and most useful GRX upgrades you can make. These will work with any Shimano road or gravel hydraulic brakes"
YouTube Link 2025-09-24T16:01Z 17.2K followers, 36.1K engagements

"I Tested AliExpress TPU Tubes So You Dont Have To AliExpress TPU Inner Tubes: Cheap Upgrade or Total Disaster I bought [--] different TPU inner tubes from AliExpress to see if theyre a hidden bargain or a total waste of money. TPU tubes are meant to be lighter faster and more efficient than standard butyl tubesbut do these ultra-cheap versions hold up In this video I put them to the test by: Fitting them Are they a pain to install or easier than expected Checking build quality Do they feel well-made or like theyll fail instantly Testing puncture resistance Can they survive common road hazards"
YouTube Link 2025-03-29T17:13Z 17.1K followers, 67.8K engagements

"No More Sealant No More Mess Why This Customer Went TPU Converting Tubeless Wheels Back to Inner Tubes with Lightweight TPU Tubes One of my customers was done with the mess sealant leaks and hassle of tubeless tyres. I recommended TPU inner tubes as a cleaner simpler alternative and this is how the conversion went. ⚙ Real-world install 💭 Why they switched TPU tubes are a great low-maintenance option for everyday riders and this job shows why. In this quick guide Ill show you how to convert tubeless wheels back to inner tubes using TPU inner tubes for a lightweight and hassle-free setup."
YouTube Link 2025-01-22T16:50Z 17.1K followers, 26.9K engagements

"Replacement AliExpress Pistons For Shimano Calipers Bench Test I tested three sets of AliExpress replacement pistons in both 2-pot and 4-pot Shimano calipers. This video covers the full teardown piston fitting seal checks bleeding and pressure testing. Shimano calipers are NOT designed to be rebuilt internally. This test is done on my own brakes only. If you're curious about how aftermarket pistons fit and how they behave under load this video shows the full process and the results. I wouldnt use these pistons on customer bikes for liability reasons but for DIY home mechanics they might well"
YouTube Link 2025-11-19T17:00Z 17.2K followers, 10.6K engagements

"Shimano XTR Dual Control: What Were They Thinking Shimanos XTR Dual Control was one of their strangest ideas combining braking and shifting into the same lever for mountain bikes. It worked with Rapid Rise derailleurs which reversed the usual spring direction. Clever on paper awkward in practice In this video I go through a service on this Scott Genius fitted with XTR Dual Control including: Brake bleed and new resin pads Tyre replacement and setup Lever adjustment and Rapid Rise indexing Overall check Ill explain how the Dual Control system actually works what Rapid Rise was meant to improve"
YouTube Link 2025-12-06T17:00Z 17.2K followers, [----] engagements

"Which Grease for Bikes Heres What I Use In this video I run through the greases I use day-to-day in the workshop. From headset bearings to pedals and threads different greases serve different purposes and some are better than others. Ill show you whats worked well for me over the years what I avoid and where I use each product on the bikes I service. This isnt a scientific lab test its based on real-world experience working on hundreds of bikes. Products shown: General-purpose bike grease Waterproof bearing grease Anti-seize compounds Hope this helps you decide what to keep in your own"
YouTube Link 2025-06-11T16:00Z 17.1K followers, 22.1K engagements

"Giant Defy Full Service: Fixing a Bike with So Many Issues In this video I perform a major service on a Giant Defy road bike covering everything from drivetrain cleaning to fine-tuning the brakes and gears. Whether you're maintaining your own bike or curious about what a full service includes this step-by-step guide will give you a clear understanding of the process. This service brought the Giant Defy back to top performance. If youre into DIY bike maintenance or want insight into professional servicing this video is for you. Subscribe for more detailed bike repair videos every week Tools I"
YouTube Link 2025-01-08T18:05Z 17K followers, 28.9K engagements

"Turning a Box of Parts Into a GRX Gravel Bike A customer brought me a frameset and a full Shimano GRX groupset to build into a gravel bike. In this video I take it from a box of parts to a finished ready-to-ride bike fitting the drivetrain routing hoses and cables setting up the brakes and completing the build with standard workshop tools. If youre building or upgrading a gravel bike with GRX this shows the full process clearly and without special equipment. Video sponsor: https://sportandleisure.com/ use code BCR10 for an extra 10% off your first order. #GRX #ShimanoGRX #GravelBike"
YouTube Link 2025-10-04T16:01Z 17.2K followers, 12.4K engagements

"I Removed Campagnolo for THIS (Kinesis Titanium Build) The new workshop is officially open for business and I am kicking things off with an absolute stunner of a project. I am taking this Kinesis Granfondo Titanium frame and giving it a massive modernization. The customer wants to turn this titanium disc-brake machine into the ultimate cross-Europe tourer capable of handling [----] miles of riding this year. To do that I was given a controversial brief: strip off the mechanical Campagnolo groupset (sorry purists) and replace it with a brand new Shimano Ultegra 12-Speed Di2 system. It wasn't a"
YouTube Link 2026-02-07T17:01Z 17.2K followers, 12.2K engagements

"Restoring a Rare [----] Raleigh Chopper -SE/Jubilee Edition This is itthe big one Join me for a full feature-length mechanical restoration of an ultra-rare [----] Raleigh Chopper. This isn't just any Chopper; it is the Limited Edition Silver Jubilee model (SE) celebrating Queen Elizabeth II's Silver Jubilee. It is believed that only [---] of these were ever produced making it one of the most sought-after Choppers in existence. In this special Boxing Day episode Im taking this bike right back to the bare frame. The goal A complete mechanical restoration without destroying its soul. We are keeping"
YouTube Link 2025-12-26T09:01Z 17.2K followers, 46.2K engagements

"Double Trouble: One Won't Stop The Other Won't Go Video sponsor- https://sportandleisure.com/bcr - use this link to automatically get 10% off Two bikes two major headaches. Its Double Trouble in the workshop today I'm juggling two different bikes with completely opposite problems: One that won't STOP and one that won't GO. The "STOP" Problem: I started with a dead Tektro Auriga caliper that was refusing to work. I tried to save it with a bleed first but it was too far gone. In this video Ill show you why the bleed failed and walk you through the upgrade to a reliable Shimano caliper to get"
YouTube Link 2026-01-21T17:00Z 17.2K followers, [----] engagements

"100-Year-Old Bike: Can a Mechanic Get This GOLDEN SUNBEAM Running After [--] Years This Golden Sunbeam bicycle is a true piece of historyit's over [---] years old and has been completely dormant for over [--] years This isn't a museum piece restorationit's a real honest attempt to see if this incredible machine can roll again under its own power. No polish no fluffjust pure mechanic work to address the seized components dried-up grease and historical wear. Watch the full hour-long process to see what it really takes to revive an engine from a century ago ✅ The Century-Old Restoration Process:"
YouTube Link 2025-08-23T16:01Z 16.7K followers, 19.4K engagements

"1 Year-3 Jobs. I QUIT (Going Full-Time & Workshop Revamp) I spent [---] days juggling three jobs to get to this point. and then I completely transformed the workshop in just one week for the future of BCR. The same space where I filmed the last [---] videos has officially gone "Dark Mode." In this video Im giving you the full tour of the revampfrom the custom tool wall and new lighting rig to the pro-level upgrades that will change the look of the channel forever. But the new paint isn't the biggest change. I have a major announcement regarding the future of the channel and my career. After a"
YouTube Link 2026-02-04T17:00Z 17.2K followers, 11.5K engagements

"Vitus Sommet Service: Brake Fail & "The List" This Vitus Mountain Bike was bought for a customer's son and at first glance it looked like a clean capable trail bike. But once I got it in the stand the list of issues started growing. In this video I'm going through the whole bike: servicing the Shimano clutch replacing the wheel bearings (eventually.) fixing the brakes sorting out the dropper post and making this bike safe for the trails again. Sponsor: Big thanks to Sportland Leisure for supporting the channel. Get 10% off your order here: https://www.sportandleisure.com/bcr (Discount"
YouTube Link 2026-01-31T17:01Z 17.2K followers, [----] engagements

"Can this Campagnolo Super Record lever be saved This Campagnolo Super Record lever completely failed so I removed it from the bike to see what could be done. The internals werent in good shape but I gave it a proper look and tried to bring it back to life. The job involved: Removing and inspecting the lever Stripping and assessing the mechanism Reinstalling cabling and setting up the gears Fresh bar tape and new hoods to finish the build A proper look inside one of Campagnolos high-end levers and a bit of a surprise by the end. #Campagnolo #BikeRepair #SuperRecord Video sponsor:"
YouTube Link 2025-10-22T16:00Z 17.2K followers, [----] engagements

"Cartridge Bottom Bracket Rebuild What They Dont Want You to Know Cartridge bottom brackets are designed to be replaced not repairedbut that doesnt mean you cant fix them. In this video I show you how to remove the old bearings and fit new ones saving money and keeping your bike running smoothly. ✅ How to remove the old bearings ✅ Measuring for correct replacements ✅ Pressing in the new bearings properly ✅ When this fix is worth doingand when its not This is a practical solution for riders who want to extend the life of their bottom bracket instead of buying a new one. Watch the full process"
YouTube Link 2025-02-12T16:00Z 16.5K followers, 32.9K engagements

"HUP Youth XC Race Bike Rebuild Top-Spec Carbon XT & SID This is a full strip clean and rebuild of a HUP Featherweight youth XC race bike built around a carbon frame Shimano XT drivetrain and a RockShox SID XX World Cup fork. The bike came in with internal cable damage brake rub issues worn drivetrain parts and a few setup problems from past repairs. Its stripped almost to a bare frame cleaned properly weighed before and after and rebuilt ready for racing. Its a very small frame but the parts on this bike are serious lightweight wheels carbon components XT brakes and shifters and a"
YouTube Link 2026-01-17T17:00Z 17.2K followers, [----] engagements

"TOO loud 🤯 This hub is insanely loud I literally had to wear hearing protection. Can you guess the brand just from the sound #LoudHub #BikeHub #CyclingTech #BCR #Bikes"
YouTube Link 2025-11-11T17:03Z 17.2K followers, 21K engagements

"Giant Propel gear Cable Replacement Is It Really That Difficult Replacing cables on a Giant Propel with internal cable routing isnt as bad as you might thinkbut its definitely not a quick job. In this Workshop Wednesday video I walk you through the full process of changing a gear cable sharing the tools tips and patience youll need to get it done cleanly. Whether you're dealing with tight bends internal guides or just planning ahead for a new cable set this guide will help you avoid the usual headaches. Magnetic tool (affiliate link) - https://amzn.to/3HTmrWs"
YouTube Link 2025-07-02T16:00Z 14.8K followers, [----] engagements

"When Three Wheels Go Wrong Trike FULL Refresh: New Fork Brakes & The Art of Setting Up Three Wheels This trike came into the workshop needing a thorough cosmetic refresh and precision adjustment. It wasn't about seizing but about making three wheels run straight quiet and solid Servicing a three-wheeler requires careful setup and this job included crucial component replacements like a new fork and new brakes. In this video I guide you through the process of servicing and repairing the trike focusing on the detailed adjustments necessary for a smooth-running machine. ✅ Major Work Performed:"
YouTube Link 2025-10-18T16:00Z 17.2K followers, [----] engagements

"Focus Service-Seized Bolts seized Seatpost & Broken Shifter-so many issues This Focus road bike came in for a "standard" service but once I got it on the stand it turned into a full rescue mission. The chain was worn beyond belief the headset was bleeding rust and the rear shifter was completely dead. When I opened up the Shimano STI lever to diagnose the fault I found something I havent seen in decades of fixing bikes: the remnants of TWO different broken gear cables jammed inside the mechanism. In this video Im stripping the bike right back to the bare frame. We are dealing with seized"
YouTube Link 2026-01-24T17:00Z 17.2K followers, 11.6K engagements

"Tubeless Tape SCAM Cheaper is better The AliExpress Tubeless Tape TRUTH Revealed I've seen countless questions about cheap tubeless tape so I put my money where my mouth is: I bought a stack of [--] AliExpress tubeless tape brands and [--] valve sets and tested them all in the workshop. This isn't a simple lab test; this is a real-world mechanic's usability testhow they stretch stick seal around the valve hole and how annoying they are to work with. Time is money when you're working on customer bikes so bad tape is a massive pain Watch the whole video to see which cheap options I'd actually use"
YouTube Link 2025-10-29T17:00Z 17.2K followers, [----] engagements

"3 Years Old and Destroyed Rescuing a Corroded Trek Domane. Watch the full stripdown and service of a [----] Trek Domane that has suffered severe corrosion. This bike has seen heavy use in harsh conditions resulting in seized parts and a "crusty" drivetrain. Ill walk you through the entire mechanic process from stripping the bike down to the bare frame to the final rebuild. Service Steps Included: Trek Domane Stripdown: Removing the crankset derailleurs and cockpit. Corrosion Cleanup: How to deal with oxidized aluminum and rusty bolts. Component Service: Cleaning the bottom bracket and headset"
YouTube Link 2025-12-13T17:00Z 17.2K followers, 31.1K engagements

"Neglected Trek MTB Restoration: Fork Service Drivetrain Fix & Brake Rescue This Trek hardtail hasn't seen a service in [--] or [--] years and it shows It arrived at the shop with the brakes pulling to the bar the fork lockout dead and the gears barely shifting. I give the bike a major service to get it back on the trails. The teardown revealed a few surprises including a set of high-end Hope wheels on a neglected frame a stripped crank arm thread and a mismatched 10-speed/12-speed drivetrain. link to the axle (affiliate link) https://amzn.to/458QH8i Video sponsor: https://sportandleisure.com/ use"
YouTube Link 2025-12-20T17:00Z 17.2K followers, 27.6K engagements

"3D Printed Bike Shop: The Good The Bad and The Snapped Ive owned a 3D printer for one week. Can it actually make useful stuff for my bikeshop A bit of fun while I fumble my way along learning the best way to print things Go easy on me 😂 In this video I test a mix of accessories and tools to see what actually holds up. Youll see the custom bottle cages jockey wheels and tool holders that came out amazing ("The Good"). But I also got overconfident. I tried to 3D print specific tools for a 40Nm job and the results were. catastrophic ("The Snapped"). ❓ Question for the Experts: My high-torque"
YouTube Link 2025-12-17T17:00Z 17.2K followers, 19.6K engagements

"TPU GRAVEL Tubes Head-to-Head AliExpress vs Top Brands These TPU inner tubes cost a fraction of what the big brands charge but are they any good In this video I: Unbox and inspect the latest gravel-specific TPU tubes from AliExpress Compare them visually to two premium TPU tube brands Fit and inflate them to test ease of use Water test for leaks or faults out of the packet Test an electric pump for heat issues Not a long-term test this is first impressions close-up inspection and initial fitment only. Feedback in the comments to help others with your experience of these tubes"
YouTube Link 2025-05-17T16:00Z 13.4K followers, [----] engagements

"STOP Paying Too Much for E-Bike Service Complete Mechanic's Guide Many people assume E-Bike maintenance is complicated but a lot of the service is just like a standard bicyclewith a few key exceptions In this professional guide I walk you through a full strip-down and service of a standard "Legal Retail" E-Bike. I cover the standard maintenance items but more importantly the specific checks required for the battery motor and electronics. This video is essential viewing for anyone who owns or works on standard pedal-assist E-Bikes. (Note: This video does NOT cover DIY or unauthorized E-Bike"
YouTube Link 2025-09-20T16:00Z 17.2K followers, [----] engagements

"Canyon Aeroad Headset Service Complete Walkthrough - CP0018 Canyon Aeroad headset day. Yay This bike came in with a very poorly headset and in dire need of new bearings.I'll show you the complete job start to finish including disconnecting the hydraulic brakeseverything. If youve got an Aeroad and youre dealing with the same issues hopefully this saves you the pain. #BikeRepair #RoadBike #CanyonAeroad #HeadsetProblems #BikeMechanic #BikeMaintenance #IntegratedHeadset #InternalCabling bike repair canyon aeroad aeroad headset canyon headset headset service integrated headset road bike repair"
YouTube Link 2025-11-26T17:00Z 17.2K followers, 19.2K engagements

"Full Strip & Rebuild on a Classic Muddy Fox Courier This classic Muddy Fox Courier came in tired and worn out so I stripped it right back to the bare frame and rebuilt it properly. Work covered: Full strip-down to frame Bearing service and fresh grease throughout New cables period correct tyres fitted Headset strip and rebuild Cleaned polished No shortcuts a proper workshop service to keep an iconic bike on the road. Let me know in the comments if you'd ride one of these old Muddy Fox builds or if youve still got one in your shed. #MuddyFoxCourier #RetroBikeRebuild #classicbike Video sponsor:"
YouTube Link 2025-11-15T17:00Z 17.2K followers, [----] engagements

"Bianchi Revival Full Service BIG Difference This Bianchi road bike came in after a few years of sitting untouched. Im doing a straightforward service to get it back on the road. Work covered: new tyres new brake cables new bar tape full clean and inspection Full setup If youve got a bike thats been stored for a while this is the typical work it needs. Nothing complicated just practical maintenance to get everything moving smoothly again. #bianchi #bikerepair #roadbike #cyclingmaintenance #barncyclerepairs bianchi bianchi service road bike service bike service bike maintenance brake cables bar"
YouTube Link 2025-11-22T17:01Z 17.2K followers, [----] engagements

"The Cheapest Bike Tool Kit Id Actually Trust (AliExpress) AliExpress bike tools can be cheap but that doesnt mean theyre useless. In this video Im pricing and building a cheap reliable home mechanic bike tool kit using tools from AliExpress. Most of the tools shown here are new to me. A few are tools Ive already used for years in a professional workshop which I include for context and comparison. This video is for home mechanics who want to work on their own bikes without wasting money on tools that dont last. What this video covers What tools you actually need for a home bike workshop Which"
YouTube Link 2026-01-07T17:01Z 17.2K followers, 18.2K engagements

"Stripped Bleed Screw Thread Repair: Shimano Hydraulic Shifter. There is nothing worse than tightening a bleed screw and feeling the threads give way. On these Shimano shifters the threads are often plastic making them very easy to strip. Before you throw the shifter in the bin or shell out 200+ for a replacement watch this video I will show you how to perform a permanent repair using a threaded brass insert. This doesn't just fix the problem; it arguably makes the shifter better than new because you are upgrading from soft plastic threads to durable brass. In this video: Assessing the"
YouTube Link 2025-12-10T17:01Z 17.2K followers, [----] engagements

"Dropping the Drops: Budget Flat-Bar Conversion Guide This Focus cross bike came into the workshop running 10-speed drop bars but the owner needed a simple reliable flat-bar setup on a budget. In this pro mechanic's guide I show you the right way to execute a low-cost conversion where every pound counts. The key to hitting the budget was a strategic mechanical hack: dropping the rear drivetrain from 10-speed down to 9-speed to save money on components without sacrificing usability. The final low price included everything: bars tyres rear mech cassette chain brake levers shifters grips and"
YouTube Link 2025-11-08T18:00Z 17.2K followers, [----] engagements

"How To Assemble a Bike From a Box (Step-by-Step Guide) Got a brand new bike delivered in a box and wondering what to do next In this video I walk you through the exact steps to safely build and set up a kids bike (or any basic boxed bike) at home using simple tools and no prior experience. Whether its for Christmas a birthday or a surprise gift this guide will help you avoid common mistakes and make sure the bike is safe smooth and ready to ride. What youll learn: ✔ How to unpack your boxed bike safely ✔ The right order for assembly ✔ How to fit handlebars wheels pedals & saddle ✔ How to"
YouTube Link 2025-12-03T17:01Z 17.2K followers, [----] engagements

"The Fattest Bike I've Ever Serviced This Fat Bike came in for a full strip down and service and these big-tyre setups require a specific approach Working on a Fat Bike involves detailed service from the frame-upa proper job to fight grime and ensure reliability. In this video I give a full service demonstration showing you what a mechanic REALLY fixes and the key difference between this and a standard MTB. The major work included a full drivetrain service and installing a new tubeless setup for puncture resistance. Note: While we stripped the bike down almost completely this video does not"
YouTube Link 2025-11-01T17:00Z 17.2K followers, [----] engagements

"I Used the Wrong Tool and Paid for It. This freewheel on my own bike was completely seized. I didnt have the proper 4-prong tool got impatient and tried using a 2-prong remover instead. I snapped the tabs off and made the job much harder. This video shows the full recovery chain whips hammers Stillsons and finally one extreme method to get it off without destroying the hub. It's a real-world example of what happens when you rush pick the wrong tool and then have to fix your own mistake. Youll see the failure the salvage process and how I rebuilt it using parts from a second freewheel. link to"
YouTube Link 2025-11-12T17:01Z 17.2K followers, [----] engagements

"Fuji MTB Major Service: Brake Mount Facing and More. In this video I perform a major service on a Fuji mountain bike covering several essential tasks: Press-fit bottom bracket removal and fitting Step-by-step guide to tackling this often tricky job. Laser alignment of handlebars Achieving perfect handlebar positioning for a comfortable and precise ride. Brake bedding-in with sinter machine Using a brake disc bedding-in machine for faster more effective results. Park Tool DT-5.2 brake mount facing Precision machining for a perfectly aligned brake caliper mount. Whether you're a pro mechanic or"
YouTube Link 2025-01-12T12:00Z 15.9K followers, [----] engagements

"Diamondback Sorrento Rebuild Worth Saving This [----] Diamondback Sorrento came in needing everything drivetrain cables bearings tyres grips the lot. It wasnt a question of whether I could fix it but whether it made financial sense to. Watch and see how I transformed this sorry old wreck you wont believe its the same bike What I replaced: Chainset Chain and cassette All cables Tyres and grips Bottom bracket bearings All work carried out at Barn Cycle Repairs fully stripped cleaned and rebuilt"
YouTube Link 2025-07-12T16:01Z 13.7K followers, [----] engagements

"Dogma X vs SL8 What Theyre Like to Work On (While I Service Them) Dogma X and Tarmac SL8 in the stand today. Im doing some basic servicing and talking through what each bike is like from a mechanics point of view the parts that work well the design choices and how they compare when youre hands-on with them. Both bikes are properly engineered and great to work on but they take very different approaches. This is just the practical side you only see in a workshop. #DogmaX #TarmacSL8 #Superbikes #RoadBike #BikeMechanic #BCR #barncyclerepairs Video sponsor: https://sportandleisure.com/ use code"
YouTube Link 2025-11-29T17:01Z 17.2K followers, 20.6K engagements

"How to spot a FAKE Shimano chain-Quick guide Think you found a bargain Watch this first Fake Shimano chains are becoming more common and using one can lead to poor shifting premature wear or even chain failure. In this video I go over the key differences between genuine and counterfeit Shimano chains so you can avoid wasting your money. 🔹 Covered in this video: Box differences (font logos and packaging errors) Chain markings and engravings Build quality and finish Common red flags when buying online ⚠ If you're buying a Shimano chain always check for these signs to make sure you're getting"
YouTube Link 2025-03-25T17:01Z 14.5K followers, 11.2K engagements

"Ceramic Coating: Never Wax Your Bike Again Is a DIY ceramic coating kit actually worth the effort A customer dropped off this brand new Propain frame and asked me to install a ceramic coating kit they bought themselves. I'm usually skeptical of these "magic" coatings but I decided to give it a go. In this video Im doing the full new bike prep: installing downtube Paint Protection Film (PPF) for impact resistance and applying the ceramic layer to see if it really lives up to the hype. If you are thinking of ditching wax for a permanent coating here is exactly how the application process went"
YouTube Link 2025-12-28T09:01Z 17.2K followers, [----] engagements

"Carbon Steerer Cut-Integrated stem cables Proper Method (and Why I Was Wrong) A few months ago I tested cutting a carbon steerer in-frame on an internally routed bike. Many of you told me theres a smarter safer way and you were right. Today I revisit the method properly and show the correct approach on an integrated cockpit setup. This isnt about shortcuts its about doing the job right without tearing the whole front end apart. In this video I cover: Why cutting in-frame can make sense The safer approach recommended by viewers Tools and setup Cutting and finishing the steerer When I would and"
YouTube Link 2025-11-05T18:01Z 17.2K followers, 14.5K engagements

"The Perfect Road Bike Already Exists (And It's From 2015) Modern road bikes have gone too far. In this video I rant about internal cable routing press-fit bottom brackets and unnecessary complexity. Using a [----] Giant Defy Advanced [--] as an example I explain why this older carbon road bike with rim brakes and 11-speed Ultegra is all most riders will ever need simple reliable and cheap second-hand. No servicing in this video just an honest discussion from a full-time bike mechanic whos seen enough overcomplication for one lifetime. Let me know in the comments what you think the best era of road"
YouTube Link 2025-05-07T16:01Z 13.7K followers, 169.6K engagements

"Different Bikes Different Problems A Day in the Workshop Different bikes different problems this is a fairly typical day in a working bike repair workshop. In this video Im dealing with four completely unrelated repairs the kind of mix you only really see when youre working on whatever comes through the door. No projects or builds this time just real customer bikes with real issues to diagnose and fix. This format is a bit of an experiment so let me know what you think. If you enjoy seeing a variety of repairs in one video Im happy to do more like this in the future. In this video Four"
YouTube Link 2026-01-14T17:01Z 17.2K followers, 11.7K engagements

"Removing a Seized Bottom Bracket Heres What It Took This bottom bracket was completely seized after [--] years. Nothing moved not even a millimetre. I threw everything at it: heat impact gun leverage and eventually one method worked. If youve got a stuck bottom bracket or just want to see how far gone one can get this ones worth a watch. 🔥 Heat Yes. 🔧 Impact Of course. 💡 Surprise technique Absolutely. 📆 Workshop Wednesday episode 🛠 Real repairs. No shortcuts. Subscribe for more stubborn fixes and full-service walkthroughs"
YouTube Link 2025-06-18T16:00Z [----] followers, [----] engagements

"Specialized SL7 Service: Di2 Updates Fork Cut New Brakes and more. This [-----] Specialized S-Works Tarmac SL7 came in for a service and some extra bits: Shimano Dura-Ace Di2 system checked & firmware updated Fork steerer cut for final cockpit fit New brake pads and rotors installed & bedded in A few other niggles addressed along the way. No guesswork just careful accurate work on one of the best road bikes out there. Fast light and now freshly dialled. #SWorksSL7 #TarmacSL7 #DuraAceDi2 #RoadBikeService #BarnCycleRepairs"
YouTube Link 2025-08-02T16:00Z 10.2K followers, [----] engagements

"How to Replace a Suspension Fork step by step Guide Swapping out a tired old fork for something better nothing fancy just a straightforward install on this hardtail mountain bike. This job includes: Removing the old suspension fork Checking headset condition and fit Installing the new fork and cutting the steerer Fitting the crown race star nut and setting correct headset preload Tools used are all basic workshop kit nothing exotic. This kind of job is well within reach if youre confident with general maintenance. 🔧 Bike: Whyte 🔧 Fork: SR Suntour XCM 🔧 Headset: Standard threadless [--] 1/8""
YouTube Link 2025-07-09T16:00Z [----] followers, [----] engagements

"2 Hours vs [--] Minutes Headset Bearing Service Compared Internal vs External Cables Headset Bearing Replacement Compared This video compares two headset bearing services on nearly identical bikes from the same brand one with external cables and one with fully integrated internal cables and hydraulic hoses. External setup: Bearings changed in under [--] minutes. Internal setup: A lengthy job involving brake bleeding cable routing and a lot more faff. Internal routing might look sleek but it massively increases service time and cost and most people have no idea until they get the bill. Filmed and"
YouTube Link 2025-06-28T16:00Z [----] followers, 21.6K engagements

"Diagnosing a BAD Road Bike Build Full Workshop Rebuild This bike turned up with a long list of build issuesmisaligned components poor cable routing and some questionable choices that made no sense. In this video I go through each problem show exactly what was wrong and how I fixed it. Its a full teardown and rebuild with a clear explanation of the steps taken. If you're into proper bike builds this ones worth a watch. 🔧 Main issues tackled: Poor cable routing Headset and bearing problems AXS issues wheel problems General messy workmanship Filmed at Barn Cycle Repairs. All work done by me. 👍"
YouTube Link 2025-05-10T16:00Z [----] followers, 24.2K engagements

"Teen Rider Destroyed This Trek Can I Fix It This Trek mountain bike came in after a solid thrashing from its teenage owner. Rear mech was destroyed chain and cassette were done tyres were worn out cables were frayed and even the grips were finished. In this video: Full inspection Replacement of drivetrain parts New cables and outers Tyres grips tuning and setup Another real-world workshop repair"
YouTube Link 2025-07-05T16:00Z [----] followers, [----] engagements

"Scott Addict RC-Left for dead for [--] years.WHY This [----] Scott Addict RC a real Cavendish-era race bike was left unused for six years. Why A broken SRAM DoubleTap shifter that the owner was told couldnt be fixed. In this video I show you: How I repaired the supposedly unfixable shifter The full condition check after six years idle The many other issues I found and fixed A proper full rebuild to bring this classic RC back to life A very satisfying job on a great old race bike. Enjoy"
YouTube Link 2025-06-21T16:00Z [----] followers, [----] engagements

"Cartridge Hub Bearing Replacement Step-by-Step Wheel Bearing Change Learn how to replace cartridge wheel bearings on your bike step-by-step. In this tutorial I show the correct way to remove and install cartridge bearings in a bicycle wheel hub using common tools and proven workshop techniques. Replacing worn hub bearings can restore smooth rolling and extend the life of your wheels if you do it right. This video covers everything you need to know: 🔧 Topics covered: How to remove cartridge bearings from a bike hub What tools you really need How to install new bearings without damage Greasing"
YouTube Link 2025-07-30T16:00Z 10K followers, [----] engagements

"Is your lever seized You need a new cable. An easy fix"
YouTube Link 2025-02-09T10:24Z [---] followers, [---] engagements

"New water technology fork Suntour XCM full of water #mtb #shorts"
YouTube Link 2025-06-13T14:31Z [----] followers, 10.2K engagements

"Whyte MTB Service From Unstoppable to Unbeatable- ZRACE In this video I fully service a Whyte full-suspension MTB including: RockShox Reverb Seatpost Rebuild Stripped serviced and bled for smooth operation. ZRACE Brake System Install Complete new setup including calipers levers and hoses. Tubeless Conversion Rims prepped tires seated and sealant added for a reliable tubeless setup. Headset Service Cleaned inspected and greased for smooth steering. Jockey Wheel Replacement New wheels fitted for improved shifting performance. Chain Lubrication Properly lubed for efficient drivetrain operation."
YouTube Link 2025-03-22T17:00Z [----] followers, [---] engagements

"TT Bike Pre-Sale Check Planet X Gears & Headset Sorted Giving this Planet X TT bike a quick once-over before listing it for sale. Just a 10-minute job indexing the gears and checking the headset tension. This is a shorter midweek bonus video but it gives you a look at what I check before putting bikes up for sale. 🔧 Work done: Gear indexing (rear mech needed slight tweak) Headset adjustment (too loose on arrival) General condition check Subscribe for more full service videos bike repairs and used bike resales"
YouTube Link 2025-05-21T16:00Z [----] followers, [----] engagements

"Cross-Threaded Pedal Crank Arm INSERT repair Brake & Gear Fix Too My customer Messed Up Bad Stripped Crank Thread Repair. This bike came in with a cross-threaded left pedal that stripped out the crank arm . The customer told me in his own words "Yeah I really messed up " So I fitted a proper thread insert to save the crank. While it was in I also replaced a damaged hydraulic brake hose and repaired and realigned the rear derailleur which had taken a knock. Crank arm thread insert repair Hydraulic brake hose replacement Rear derailleur hanger alignment This is the first video filmed with my"
YouTube Link 2025-06-04T16:00Z [----] followers, [----] engagements

"7-Year Unfinished TT Bike Project Lets Finish It This abandoned TT bike project sat unfinished for [--] years. Wrong parts missing parts and some downright bizarre choices Watch as I finally bring it all together and turn it into a stunning time trial machine that was worth the wait #BikeBuild #TimeTrialBike #CyclingProject"
YouTube Link 2025-07-26T16:00Z [----] followers, [----] engagements

"Scott Commuter Bike Service and Deep Clean This video covers a full bread-and-butter service on a well-used Scott commuter bike. Its a proper workshop overhaul with the usual parts replaced and a deep clean to bring it back to life. Work carried out: New tyres New brake pads New cables Replacement left crank Thorough degrease and clean Video sponsor https://sportandleisure.com/ enter code BCR10 for an additional 10% discount on your first order This is the kind of everyday service that keeps a hard-ridden commuter bike running reliably. #BikeRepair #CommuterBike #ScottBikes #BikeService"
YouTube Link 2025-08-30T17:01Z 17.2K followers, [----] engagements

"Pub-Ready Peugeot [--] Years Old and ready to roll [--] Pub Bike Whod Want to Steal It This 35-year-old Peugeot Ranger mountain bike came in as a complete wreck. Ive given it just enough attention so it rides well but kept the patina (and rust) intact. Perfect for locking outside the pub without losing sleep. Still rusty still ugly but mechanically sound. Purpose: Get you to the pub and back probably"
YouTube Link 2025-08-16T16:00Z 10.8K followers, [----] engagements

"Sticking Shimano lever Is your hydraulic lever not returning correctly If you are lucky it could be a super simple fix loosen off the clamp bolt and watch it release 😎"
YouTube Link 2025-09-01T14:36Z 17.2K followers, [----] engagements

"Add Interrupter Levers to Your Drop Bars Full Install Guide Want extra braking control from the top of your drop bars Interrupter brake levers (also called cross-top levers) are a smart and underrated upgrade. In this video I walk you through how to fit a pair of interrupter levers properly with clear steps on cable routing lever alignment and setup. ✔ Suitable for most road bikes with cable-actuated rim brakes ✔ Useful upgrade for CX touring and commuter bikes ✔ Workshop Wednesday episode Affiliate links- Levers- https://s.click.aliexpress.com/e/_oExIOo4 Bar tape-"
YouTube Link 2025-07-23T16:00Z [----] followers, [----] engagements

"Cube Hardtail DOA Stripped Serviced Superb This [----] Carbon Cube Reaction hardtail came in with one big problem completely dead DOT brakes In this video I: Service the suspension Do a full strip-down and re-grease Rectify the failed braking system Give the bike a proper refresh A straightforward service turned this from unrideable into a superb hardtail ready to hit the trails Video sponsor: https://sportandleisure.com/ use code BCR10 for an extra 10% off your first order. #CubeMTB #MountainBikeRepair #MTBService #BikeMaintenance #MTBTech cube hardtail cube mtb cube carbon bike mountain bike"
YouTube Link 2025-09-13T16:00Z 17.2K followers, [----] engagements

"Bike Gears Wont Shift Stop Wasting TimeCheck This Bike Gears Not Working Dont Waste HoursCheck This First Your bike gears arent shifting properly and youve checked everythinglimit screws indexing derailleur alignmentbut the real issue might be staring you in the face. I spotted the problem quickly but many riders could spend hours adjusting the wrong things. In this video I show why cable condition is one of the most overlooked causes of shifting issues and how to fix it fast. 🔧 What youll learn: Why bad cables cause shifting problems How to diagnose cable issues quickly A simple fix to save"
YouTube Link 2025-04-01T16:00Z [----] followers, [----] engagements

"Orange Five Full Suspension MTB Final Setup and tune. This brand new Orange Five looks amazing. but it needed work. Cables too long bars too wide logos all over the place and dont get me started on the crank protection. Heres how I gave it the setup it shouldve had from the start. Whats covered: Bar trimming Cable routing and cutting Tyre logo alignment (yes I care) Tubeless set up Crank protection film Torque checks and setup details Dropper work Nothing was wrong but everything needed tweaking. #OrangeFive #BikeSetup #MTBMechanic"
YouTube Link 2025-05-31T16:00Z [----] followers, [----] engagements

"Gears to Single Speed: The PRO Method for Perfect Chainline (Full Conversion Guide) Converting a geared bike to single speed is one of the best upgrades you can do for a low-maintenance simple and reliable bike. However getting the perfect chainline and tension is absolutely crucial for smooth quiet running. In this video I show the full conversion process using a simple conversion kitincluding removing the cassette and derailleur fitting a single cog and spacers and setting the correct chain line. This guide works on most modern bikes with a standard rear hub Ideal for commuting winter"
YouTube Link 2025-10-08T16:01Z 17.2K followers, [----] engagements

"One Part Didnt Belong So I Fixed It [----] Cannondale Red Shred This is my [----] Cannondale Red Shred a rare early aluminium MTB from the late '80s. Most of its period-correct and still rides well but one part stood out straight away. It didnt match the era the bike or anything else on it. In this video I give a quick overview of the build highlight a few interesting details from Cannondales early MTB days and quietly swap out the part that had no business being there. Tracking down the right replacement wasnt easyI ended up sourcing it in a way most people probably wouldntbut it was worth it to"
YouTube Link 2025-05-24T16:00Z [----] followers, [----] engagements

"Smooth Shifting Guide Chain Cassette & Derailleur Overhaul Chain & Cassette Replacement + Derailleur Service Full Drivetrain Overhaul Worn drivetrain components can cause poor shifting skipping gears and increased wear on your bike. In this video I go through a full drivetrain servicereplacing the chain and cassette while also stripping cleaning lubricating and adjusting the derailleur for smooth reliable shifting. Covered in this video: Checking for chain and cassette wear Removing and installing a new chain & cassette Correct chain sizing and joining Full derailleur service cleaning"
YouTube Link 2025-04-19T16:00Z [----] followers, [----] engagements

"The Messy Truth About Ultrasonic Cleaners (Fluid Setup & Tips) Ultrasonic cleaners are becoming more common in workshops but are they really the best way to clean your bike parts Youll see: How ultrasonic cleaners work The fluids I use. Where ultrasonic cleaning helps and where its unnecessary My honest opinion after real-world use in the workshop If youre thinking about buying one or want to know if yours is being used correctly this video will help you. Amazon affiliate links to the cleaners- [--] litre main cleaner- https://amzn.to/3HNYLmz small chain cleaner- https://amzn.to/4fYosO3 ZEP ("
YouTube Link 2025-08-27T16:00Z 17.2K followers, [----] engagements

"How to Route Internal Cables & Brake Hoses Like a Pro Struggling with internal cable routing Learn pro techniques for smooth hassle-free installation Internally routing cables and brake hoses can be frustrating especially with frames and handlebars that dont have built-in guides. In this video Ill show you the most effective techniques used by professionals to make the job easier and avoid common pitfalls. Whats Covered: 🔹 Best tools for internal routing 🔹 Step-by-step guide for routing through frames forks and handlebars 🔹 Dealing with tight bends and tricky internal bar routing 🔹 How to"
YouTube Link 2025-04-05T16:00Z [----] followers, [----] engagements

"Servicing a [---] Bianchi and a 10K Bianchi Big Differences Two very different Bianchi road bikes came into the workshop this week one older around [---] and one modern worth around [-----]. I service both replacing cables bearings and doing the usual setup work. Its interesting to see how an older entry-level frame compares with a modern superbike when youre working on them side by side. If youre curious about real-world road bike servicing this video shows the full process with two very different bikes on the stand. #Bianchi #RoadBikeService #BikeMaintenance #cycling Video sponsor:"
YouTube Link 2025-09-27T16:01Z 17.2K followers, 31.2K engagements

"Crashed on Holiday Broken rider But Is the Bike OK The rider might still be sore but we all know the real question- "Is the bike ok 😁 Crashed on holiday rider came home with broken ribs but what about the bike Packed straight into the EVOC bag after the crash and flown home without even a quick check. In this video I: Unpack the bike for the first time since the crash Give it a long overdue clean Inspect it properly for damage Sort any issues Rebuild and repack it ready for the next trip Video sponsor https://sportandleisure.com/ enter code BCR10 for an additional 10% discount on your first"
YouTube Link 2025-09-06T16:01Z 17.2K followers, [----] engagements

"Cutting a Carbon Steerer In-Frame Realistic or Reckless A few viewers suggested trying thiscutting a carbon steerer without removing the fork even on a frame with fully internally routed brake hoses. I wouldnt normally try it but I decided to test the idea using a scrap frame and fork. There wasnt an actual brake hose insidejust an imaginary oneso I could simulate the scenario without risking any real components. The goal was to see how realistic this method might be in practice and what the risks are. In the video I cover: Why I ran this test at all The setup: scrap frame carbon fork"
YouTube Link 2025-08-03T23:00Z 10.3K followers, [----] engagements

"Retro MTB Restoration Diamondback Topanga FULL Rebuild This Diamondback Topanga wasnt in bad shape but it got the full workscompletely stripped down to the bare frame and fully rebuilt. Every bearing bolt and part was cleaned inspected greased and reassembled properly. In this video I take you through the full service process step-by-step: drivetrain bottom bracket headset brakes and final setup. A clean example of a classic MTB brought back to perfect working order. Some of the tools used (affiliate links) Bottom bracket threading -https://s.click.aliexpress.com/e/_oCgZhoL Bottom bracket"
YouTube Link 2025-04-26T16:00Z 10.5K followers, [----] engagements

"Which AliExpress Tools Survived [--] Years of Daily Workshop Use Which AliExpress Tools Survived [--] Years of Daily Workshop Use After [--] full years of daily use in a professional bike workshop Im reviewing 20+ different AliExpress tools showing you what lasted what failed and whats still worth buying today. This is real-world testing not sponsored with honest results based on daily mechanical work. In this video: Over [--] AliExpress tools reviewed Tools that lasted under real workshop conditions Tools that wore out or failed Mini tour of the full professional bike workshop setup #AliExpressTools"
YouTube Link 2025-05-03T16:01Z [----] followers, 10.1K engagements

"CUBE Agree-major service this one fought HARD This Cube Agree road bike came in for a major service and it put up a serious fight. Every component had issuesseized bolts worn-out parts and hidden surprises that made this one of the toughest repairs Ive tackled in a while. In this video: Full strip-down and rebuild Stubborn components that refused to budge Unexpected damage and worn parts Fixes replacements and problem-solving throughout This was a battle from start to finish but the result was worth it. Watch the full process to see what went wrong and how it was fixed. #CubeAgree"
YouTube Link 2025-04-12T16:01Z [----] followers, 23.8K engagements

"Seized Barrel Adjuster Heres the Easy Way to Remove It This weeks Workshop Wednesday: removing a seized downtube barrel adjuster the kind that laughs at pliers and penetrating fluid. In the end it had to be drilled out cleanly without damaging the frame threads. If youve got one stuck solid and nothings shifting it this is how I deal with it in the workshop. Quick simple and safe. Links to the tools (affiliate links) Wera tap set- https://amzn.to/4nl1nYZ Wera ratchet- https://amzn.to/4em0SKe 3.2mm drill bits -https://amzn.to/3HZq3WK ( other sizes same link)"
YouTube Link 2025-06-25T16:01Z [----] followers, [----] engagements

"TROUBLE Hiding in a Routine FELT Road Bike Service. This FELT carbon road bike came in for a fairly standard service but a few things made it a bit more involved than expected. The rear brake caliper pin was completely seized and took some effort to sort and there were issues with the integrated headset that needed attention. I also fitted a new chain and cassette gave the whole bike a deep clean and checked everything over to get it riding properly again. Nothing too fancy just solid workshop work on a decent bike that had been neglected a bit. If youre into road bike servicing tackling"
YouTube Link 2025-06-07T16:01Z [----] followers, [----] engagements

"Which Chain Wear Tool Should You Trust I tested a range of popular chain wear tools including the Park Tool CC-4 to see how accurate they really are. I also measured chain wear manually using a ruler and digital caliper to compare the results. In this video I explain how each tool works where they differ and why some might give misleading results depending on your drivetrain. I also touch on cassette wear and when it makes sense to replace it alongside your chain. If youve ever wondered whether you can trust your chain checkeror which one to buythis video should help"
YouTube Link 2025-06-14T16:01Z [----] followers, [----] engagements

"Bike Mechanics Tool Chests Tour Workshop Organisation In this video I go through the tool chests in my bicycle workshop. I show how Ive organised the drawers and the tools I use day to day as a bike mechanic. Everyone has their own way of setting up a workshop. This is a straightforward look at mine with five tool chests that keep everything in order for repairs and servicing. If youre interested in bicycle maintenance workshop setups or just curious about what a mechanic keeps in their drawers youll get a good idea here. Video sponsor https://sportandleisure.com/ enter code BCR10 for an"
YouTube Link 2025-09-03T16:00Z 17.2K followers, [----] engagements

"Tubeless Tyre Wont Seal Heres How I Fix It Tubeless tyre setups can go wrong leaks burps and tyres that just wont seal. In this video I fix a fresh tubeless install that wasnt holding air. I show how to prep the rim apply new tape fit tubeless valves add sealant and seat the tyre so it seals first time. If your tubeless tyre wont seat or keeps losing air this step-by-step process shows what to check and how to fix it. 🛠 Tools and materials used: Tubeless valves Sealant Rim tape Floor pump/compressor Sealant injector kit- https://amzn.to/46RCeOl Presta valve cores and tool-"
YouTube Link 2025-10-01T16:01Z 17.2K followers, [----] engagements

"I Bought a Tandem Hire BikeThen Totally Transformed It This Dawes tandem started life as an old hire bikebut not anymore. Ive taken it apart rebuilt it and added some subtle but important upgrades including a hydraulic disc brake conversion to bring it up to modern standards. In this video Ill walk you through the condition it arrived in what needed attention and the improvements I made along the way. 🛠 Upgrades & Fixes Covered: Hydraulic disc brake conversion front & rear Cabling replaced and rerouted Drivetrain service and setup General rideability improvements Small hidden tweaks youll"
YouTube Link 2025-07-19T16:01Z [----] followers, [----] engagements

"The Last Fix I serviced a bike that didn't need it and will never be ridden again WHY Watch me give this crazy Cannondale a full strip down and refresh ready for its forever home-on a wall Amazing aero frame and beautiful colour I really enjoyed this one. #BikeService #BikeRepair #TheLastFix Tools I use (these are affiliate links that may earn me a small commission should you shop via them this all helps support the channel and helps it grow ) Derailleur hanger tool - https://s.click.aliexpress.com/e/_oEDCsA4 Park tool EP1- https://amzn.to/3Dce4mC Wiha allen keys- https://amzn.to/41zVRZE"
YouTube Link 2025-03-09T16:00Z 10.3K followers, 10K engagements

"Quintana Roo triathlon bikes Service & Surprises These two Quintana Roo time trial bikes came in from the same owner for routine servicingbut there were a few extra jobs needed along the way. Heres what I cover in this video: Diagnosing and fixing a loose headset issue Replacing a worn chain and cassette Rerouting an internally routed brake cable Standard service checks: gears brakes torque settings lubrication General inspection and tweaks to keep everything race-ready #QuintanaRoo #TriathlonBike #TTBike #BikeMechanic #BikeMaintenance #InternalCableRouting #CyclingTech #BikeService"
YouTube Link 2025-08-20T16:01Z 10.8K followers, [----] engagements

"World's tightest pedals #bikerepair #barncyclerepairs #seized These pedals took some significant effort to remove Crank heated upPB blasterice sprayed axle100 litre air compressor emptied twice Hazet air impact gun on max power and they eventually came. Believe it or not they had been greased and zero corrosionjust stupid tight by whoever fitted them (not me) I think this would have been almost impossible without impact tools. bike repair seized pedal stuck pedal remove pedal bike maintenance quick bike fix pedal removal cycling repair DIY bike repair bike tools bicycle pedal stuck how to"
YouTube Link 2025-10-02T19:01Z 17.2K followers, 21.8K engagements

"Raleigh DYNA TECH [---] Restoration35 years of problems Relax with me as I restore a classic 35-year-old Raleigh Dynatech [---] road bike complete with its original Shimano [---] SC components. This authentic restoration focuses on cleaning inspecting and rebuilding the bike to bring it back to life while staying true to its vintage charm. In this video: A detailed look at the bike's current condition. Cleaning and restoring the Shimano [---] SC group set. Reassembling the bike with care for authenticity. Perfect for vintage bike enthusiasts collectors or anyone curious about bike restoration. Watch"
YouTube Link 2025-02-02T16:00Z [---] followers, [---] engagements

"Drop Bar to Flat Bar Conversion Everything You Need to Know Thinking about converting your drop-bar bike to flat bars In this video I show the full process of doing a flat bar conversion the parts you need and some of the common issues youll run into. Youll see: Complete drop-bar to flat-bar conversion Which Shimano kits work best (Claris 8-speed & Sora 9-speed shown) Cable lever and shifter setup tips Fit adjustments and things to watch for Video sponsor: https://sportandleisure.com/ use code BCR10 for an extra 10% off your first order. Claris 8-speed kit:"
YouTube Link 2025-09-17T16:01Z 17.2K followers, [----] engagements

"Vintage Fuji Road Bike Restoration: Is This 70s Classic WORTH the Trouble Is This 70s Classic WORTH the Trouble This beautiful 1970s Fuji Road Bike came into the workshop needing a massive overhaul. I took it from a tired flat-bar setup back to a proper vintage drop-bar road bike complete with a full strip-down deep clean and perforated leather tape wrapping. As a professional mechanic I'm showing you the special considerations for restoring vintage steel frames and converting old components. Watch the entire video for the full transformation and final verdict on this 70s Fuji Road Bike ✅"
YouTube Link 2025-10-11T16:01Z 17.2K followers, [----] engagements

Limited data mode. Full metrics available with subscription: lunarcrush.com/pricing