@kaizen3dprints Avatar @kaizen3dprints Kaizen3DPrints

Kaizen3DPrints posts on TikTok about official, in the, this is, the first the most. They currently have [------] followers and [---] posts still getting attention that total [------] engagements in the last [--] hours.

Engagements: [------] #

Engagements Line Chart

Mentions: [--] #

Mentions Line Chart

Followers: [------] #

Followers Line Chart

CreatorRank: [-------] #

CreatorRank Line Chart

Social Influence

Social category influence cryptocurrencies #868 stocks 2% technology brands 2% social networks 2% gaming 1% products 1% finance 1%

Social topic influence official 15%, in the 13%, this is 12%, the first 12%, to the 8%, if you 7%, polymesh #1, white #1041, check 5%, bifrost #99

Top accounts mentioned or mentioned by @bambulab @thangs3d @snapmaker @bambulabofficial @snapmakerglobal @dfwfabricmart @inslogic @sunlu @protopasta @inlandfilament @amolen @lovoon3d @plasport3dfilament @timeplast @mypeopoly @elegoo @overture @shoreydesigns @creality3d @flashforge3dprinter

Top assets mentioned Polymesh (POLYX) Bifrost (BFC) BiFi (BIFI2)

Top Social Posts

Top posts by engagements in the last [--] hours

"This shows the difference in movement between petticoat tulle and polymesh while working with our pleating technique. This was one of the very first projects I embarked on the potential is so vast. #3dfashion #3dprinting #textiles #pleating #cyberpunk"
TikTok Link 2024-02-17T05:45Z 43.5K followers, 270.2K engagements

"Here is another [--] color print heading on over to the @BAMBULAB Official H2S. Unloading old filament selecting a new [--] color palette and loading the new filament in was about a [--] minute process 😅. With so many AMS units linked together I need [--] [--] to [--] ptfe tube connectors. Now that they are all going through one nozzle it's become quite the jungle back there 😅. This is a [--] part print that take about [--] hours in total print time using a variety of PLA filaments from Bambu Lab Polymaker Protopasta IIIDMax CookieCad and Snapmaker. The build sheet is a holographic magnetic sheet that has been"
TikTok Link 2026-01-22T22:57Z 43.5K followers, 19K engagements

"I'm working on designing some new textile designs and thought I'd share the latest print. This is a basic Herringbone pattern with a 1mm offset. it's printed on a flicker grid pflat sheet with thermochromic filament from @Protopasta 3D Printer Filament on white illusion mesh. What do you think of this design"
TikTok Link 2026-01-31T19:35Z 43.5K followers, [----] engagements

"I have been designing a larger model for printing on the @Snapmaker U1 and am giddy with excitement at how the quality is turning out. Do you prefer the blue/black or the white/black combo These are all printed with TPU"
TikTok Link 2026-01-31T20:10Z 43.5K followers, [----] engagements

"I'm continuing to prototype this herringbone textile for sizing and spacing. Here it is scaled down 50% and multiplied. I used a @BAMBULAB Official P2S for this 3D printed textile on a magnetic pflat sheet"
TikTok Link 2026-02-01T01:08Z 43.5K followers, 27K engagements

"Congrats to the February Ko-fi winners Check out the Ko-fi link in our bio and sign up for a membership for your chance to win. 😁"
TikTok Link 2026-02-03T06:17Z 43.5K followers, [----] engagements

"I've had such a great track record with successful prints these last couple of weeks on the @snapmaker_global U1 but had a minor hiccup with the latest print. There was just a pretty substantial firmware update to the U1 that I installed yesterday but still sent a wallet to be printed overnight with a new heart textile modifier. I woke up this morning to a bit of an issue. I realized that with the new update Orca Slicer may not be the most optimized. Now that I've updated Snapmaker Orca to the latest version we are back in business. I had previously switched to Orca slicer due to connection"
TikTok Link 2026-02-11T02:17Z 43.5K followers, [----] engagements

"I finished the front pocket to this hoodie the other day. It's a joy to print them in one piece with the @mypeopoly Magneto X. I printed this with a red blue green tri color from @lovoon3d on a magnetic bifrost PFLAT sheet onto a two way stretch powermesh followed by sewing it onto an existing hoodie"
TikTok Link 2024-05-28T02:54Z 43.5K followers, 26.9K engagements

"Newly added simple to print-on-fabric bracelets. There are three sizes to choose from and they only take about [--] minutes per bracelet Get the file now on my @thangs3d page www.thangs.com/designer/kaizen3dprints or directly at https://than.gs/m/1163741 You'll need some mesh fabric jump rings and a clasp of your choosing. Pick a color and happy printing This is a great way to color coordinate and outfit or create your favorite color combination that fits your personality I used a bifrost magnetic pflat sheet that can be found on my website at Www.kaizen3dprints.com in addition to fabric sample"
TikTok Link 2024-10-28T22:21Z 43.5K followers, 111.6K engagements

"If you have an @Elegoo 3D Official Centauri Carbon and are having issues with getting it to level the bed here is the fix I spent the first two weeks of testing trying to figure out why I was the only one without good prints. Shoutout to the other Daniel who helped troubleshoot the problem. When I spoke with elegoo about the problem they guaranteed me that this would be fixed before any printers were shipped out for retail. This is not the case as I'm scrolling through my fyp and I'm seeing people run into the same issue. The hotend wiper sits too far in front of the purge chute so when the"
TikTok Link 2025-02-24T19:30Z 43.5K followers, 35.7K engagements

"Did I just 3D print the first textile with Quantum Dot filament from @Protopasta 3D Printer Filament My mind was blown yesterday when this filament was shared at CES yesterday. I drove up to their facility this morning to check it out with my own eyes and I still can't believe it. This is the brightest and most reflective filament I have ever seen. If you want to be among the first to get your hands on this filament (and other pigments) then head to protopasta's website through the link in my bio and join their Endless Exploration subscription by Feb 28th for March delivery. It's seriously so"
TikTok Link 2026-01-08T05:37Z 43.5K followers, 14.4K engagements

"I've been working on a fun project using the @Snapmaker U1 which led me to make a quick video on a handful of changes we can make to improve the quality of our first layer using multiple colors of TPU. In this example I'm using 95A TPU from @Inslogic 3D on a starlit hive P-Flat sheet. In the first print the tpu settings were too hot by about 20+ degrees causing more stringing than we want. By adjusting the temperature changing the order in which the filament prints and increasing the wall count of our modifier we have improved the final print quality drastically. What are your thoughts"
TikTok Link 2026-01-30T20:52Z 43.5K followers, 12K engagements

"I've been working on different iterations of this bag for a while and I'm finally happy with the end result. With this model I'm using the @snapmaker_global U1 to print [--] colors of TPU at the same time with no color bleed and very little waste. You can find it on my @Thangs3D profile. This was printed using a starlit hive PFLAT sheet with Black and white 95a tpu from @Inslogic 3D Blue silk TPU from @SUNLU STORE Pink 95a TPU from @OVERTURE 3D The model can be modified with different textile patterns or svg files to further customize your bag. Instructional videos are linked on the model's"
TikTok Link 2026-02-06T22:10Z 43.5K followers, [----] engagements

"I just uploaded a new wallet design on my @Thangs3D profile accessible through the link in my bio. I have been using the @snapmaker_global U1 for these multicolor TPU prints and it's been working very well. This wallet requires [--] rivets and [--] grommets. I use my hand press for quick work of them but it's not too many to do by hand. The two grommets at the top of the wallet allow it to be clipped through a belt loop or worn around your neck/wrist/shoulder etc. There are different sizes with different built in spacer thicknesses to further customize your wallet. To make it even more amazing use"
TikTok Link 2026-02-12T05:01Z 43.5K followers, [----] engagements

"Happy Saturday For those new to 3D printed textiles here is an example of the first layer through peel-off. A pause command is placed at the beginning of layer [--] where fabric and magnets are placed. The print is resumed (layer height must be equal to or greater than the thickness of your mesh). Once finished heat the build plate back up to [--] degrees to help aid in the removal of the textile. Any questions Let me know in the comments In this example I am printing on a @BAMBULAB Official H2S with red sparkle PLA from Bambu Lab on an inception pflat sheet (www.kaizen3dprints.com) with a red"
TikTok Link 2025-12-06T19:08Z 43.5K followers, 657.9K engagements

"I just uploaded a simple heart textile (that can also be used as a multicolor modifier) onto my @Thangs3D profile. I'm a huge fan of UV reactive filament hearts and shiny things 3D printed UV reactive textile With a holographic PFLAT sheet Let's take it outside in the sun once removed from the sun it will revert back to it's original color in about [--] minutes lightweight and machine washable Endlessly customizable What do you think It can also be activated with artificial UV light 3D printed UV reactive textile With a holographic PFLAT sheet Let's take it outside in the sun once removed from"
TikTok Link 2026-02-13T01:18Z 43.5K followers, 199.9K engagements

"Do you want a dragon scale mask Head on over to my @thangs3d account in my bio to check it out and download the file for free Each side takes approx [--] hours to print and a little bit of sewing. Give it a shot I like printing on a two-way stretch polymesh to allow for a more comfortable fit. Printing on the PFLAT sheets gives the inside a super soft feel. After the two sides are printed you can either hand sew them or use a zipper foot on a sewing machine to attach them rights sides together before trimming excess fabric away. https://than.gs/m/1032837 Thanks to @shoreydesigns for the dragon"
TikTok Link 2024-05-11T05:43Z 43.2K followers, 14.4K engagements

"I'm continuing to work on these long fingerless gloves this time I printed with a white to purple with a uv filament from @plasport3dfilament This reel shows the effect of different light sources. I printed this on a white two way powermesh (95% poly 5% spandex) on a @bambulab_official p1p p1s and a1 machines. I also used an inception pflat sheet to give it the holographic shine. It is white at rest but when uv light hits it it changes to purple. When you go out of the sun it will revert back to white. You can find this file on my @thangs3d profile - www.thangs.com/designer/kaizen3dprints"
TikTok Link 2024-08-29T17:00Z 43.1K followers, [----] engagements

"I just finished the first bicep length fingerless glove and I couldn't be happier with how it turned out. Each side was [--] prints that I connected with one long piece of two way stretch polymesh fabric. I used an inception pflat sheet on each side to demonstrate how the black and white pla come out differently. This file will be uploaded this weekend for those daring enough to try it. (you must have a non bed slinger style printer to lay the fabric down in one piece in lieu of using resin to attach them together) #fingerlessgloves #3dtextiles #3dfashion"
TikTok Link 2024-08-31T16:10Z 42.9K followers, 22.5K engagements

"FINALLY After weeks of futzing with the @creality3d K2 Plus I've achieved a decent first layer and a print without errors This is a 350mmx350mm (14"x14") 3d printed textile. I used an inception style magnetic pflat sheet found at Www.kaizen3dprints.com using burnt titanium pla from @flashforge3dprinter on a black powermesh (95% poly 5% spandex). The pattern is a floral design found at www.thangs.com/designer/kaizen3dprints. Now I can start printing some larger pieces 😍"
TikTok Link 2025-03-22T19:17Z 43.3K followers, 89K engagements

"I've been using the @BAMBULAB Official P series for my business cards (8 at a time) but now I'm cranking out [--] at a time on the H2D and H2S. I may even be able to squeeze a couple more on the side now that the entire bed is available on the H2S. I'm using a magnetic Inception pflat sheet on the H2D and a "colorful" pflat sheet on the H2S. These can be found at www.kaizen3dprints.com or through the link in my bio and can be easily cut down to any sized build plate with scissors or a razor blade. They just stick right on top of an existing pei sheet"
TikTok Link 2025-09-03T21:27Z 43.4K followers, 10K engagements

"I'm loving this new hypnospiral paired with a holographic build sheet. In this example I'm using "inception" found at https://kaizen3dprints.com I used red yellow green and blue glow in the dark PLA filament from @BAMBULAB Official printed on an H2S. You can find this design and many more on my @Thangs3D account at https://thangs.com/designer/kaizen3dprints or through the link in my bio"
TikTok Link 2025-09-08T20:05Z 43.1K followers, [----] engagements

"I have been getting away with using the 256x256 magnetic pflat sheets on the @snapmakerinc U1 but it's about time I max out the build size of 270x270 and cut down a larger sheet to accommodate. This time I went with one I haven't shown off a ton - starlit hive. The magnetic pflat sheets can be cut down to any size or shape. For those interested in a restock of other designs unfortunately tariffs and shipping have ruined any chances of that in the near future. What I have in stock has been going quickly. I would get them now if you want them Www.kaizen3dprints.com"
TikTok Link 2026-01-29T05:00Z 42.7K followers, [----] engagements

"Giveaway time I've got these individual uv changing white to purple hexagons with a holographic bifrost finish up for grabs. I'll also include one of my new cute little rainbow clouds 😍. You have to be following me and leave a comment saying you want them You get an extra entry if you tag a friend or share it to your story Good luck The winner will be randomly selected on Sunday September 29th at 8pm PST"
TikTok Link 2024-09-27T02:58Z 43.5K followers, [----] engagements

"Here's another example I've printed up this time using a negative part modifier to create a new bag design. This is using [--] ams units connected to a P1S 3D printer from @bambulab_official. This example uses [--] different filaments and a bifrost pflat sheet on illusion mesh from @dfwfabricmart Using a UV light we see the color change immediately from white to purple. More to come"
TikTok Link 2025-04-14T06:10Z 43.5K followers, 17.1K engagements

"Here is another example of the @BAMBULAB Official P2S printing up a 3D textile. In this example I'm using a dragon con base textile with a negative modifier for the side panels. I'm using a holographic pflat sheet (inception) found at www.kaizen3dprints.com"
TikTok Link 2025-10-16T17:06Z 43.5K followers, 65.9K engagements

"Here is part [--] of how to fix the @Snapmaker U1 when the toolheads fail to be picked up or parked. Part [--] went through troubleshooting the first three things that should be checked when the toolheads are not functioning. Here is a overview video of the steps laid out in the Wiki for the U1 found here https://wiki.snapmaker.com/en/snapmaker_u1 Following these steps I adjusted the pick and park coordinates. This process took about [--] minutes from start to finish. I just ran a new calibration and will report back after the first print has been completed"
TikTok Link 2025-11-25T22:14Z 43.5K followers, [----] engagements

"How do you set up multiple ams units on the @BAMBULAB Official H2C I've connected a third ams [--] unit that I want to connect to the left nozzle while the two other ams units are connected to the right nozzle. Here is the process"
TikTok Link 2025-12-13T01:19Z 43.5K followers, 26.3K engagements

"The @BAMBULAB Official H2C is up and running. I'm having it work away on some gridfinity parts to organize my drawer just a bit. I'm printing with translucent PLA from Bambu Lab right now. The benchy was [---] toolchanges at a little over [---] hours print time. The quality was impressive other than some bridging (bridging parameters had not been tinkered with yet) I'll keep printing things and keep you informed of how it's going"
TikTok Link 2025-12-09T21:04Z 43.5K followers, 20.4K engagements

"I've been getting asked to make this reel nearly every day. I'm sorry it's taken so long Today we are doing a quick overview of the printers that I recommend based on my experience using them. @BAMBULAB Official @prusa3d @Snapmaker No I cannot "choose one printer to save in the case of a natural disaster" 😅 They all have unique skillsets. This short video is intended to bring the basic differences together so you can make the most informed buying decision for you. A 3D printer is a brilliant investment. Take as much time to research. If you decide to go with a different brand I wish you luck"
TikTok Link 2025-12-14T05:19Z 43.5K followers, 34K engagements

"I love blending crafts Today I pulled off this freshly 3D printed textile inspired by the stained glass window from Stranger things (this file is now available for free on my thangs account). I printed this on a white illusion mesh that I sewed onto a base textile using a basic zig zag stitch on my ST371HD from Brother. The filaments used were cool grey color shifting pla amd prince of purple pla from ambrosia starlight coment from polymaker and heartthrob red metallic from protopasta. I used an inception pflat sheet for the holographic effect. What are your thoughts"
TikTok Link 2026-01-15T18:50Z 43.5K followers, 302.4K engagements

"This is a video that demonstrates how I use UV curable resin to connect multiple 3D printed pieces together to form a larger section. I leave fabric on one side of the textile but I remove the fabric from the opposing side's textile. I use a small applicator (a needle or toothpick works well for me) and some UV curable resin to adhere the two pieces together. Please be responsible when working with resin a well ventilated room with a mask and gloves are highly recommended. This design was made using new software from @pixelart3dcreator Any questions I'd love to hear your thoughts"
TikTok Link 2026-01-27T20:53Z 43.5K followers, 10.9K engagements

"Ko-fi Membership Drawing February 1st"
TikTok Link 2026-01-31T04:53Z 43.5K followers, [----] engagements

"I've been getting asked every day on how I add designs into the prints that I make. This video will show you how I've been loving the @Snapmaker U1 and its ability to print with multiple types of filament. Any 3D model can be manipulated in the slicing software. In this case we load in an STL modifier and change the thickness height and color. Different parameters can be adjusted such as bottom layer pattern or wall count. This was printed using a silk blue TPU from @SUNLU STORE and a black 95a TPU from @Inslogic 3D on a starlit hive PFLAT sheet. What do you think of this process"
TikTok Link 2026-02-01T18:58Z 43.5K followers, [----] engagements

"I'm stoked with how the quality of these [--] color tpu prints are coming out on the @Snapmaker U1. I spent a fair amount of time dialing in the settings for these individual TPU filaments I'm using and I would say it was well worth it I used the Snapmaker logo to create a patterned textile that I used as a modifier for the recent bag I'm designing. The top of this bag printed in roughly [---] hours. The base is up next at [---] hours followed by the sides at [--] hours. Instead of using the side mounted spool holders I opted to put the rolls of TPU in the Snapdryer boxes to keep them dry and for ease"
TikTok Link 2026-02-03T02:34Z 43.5K followers, [----] engagements

"I just got a little goodie box sent over from @Polar Filament and I'm pleased with the amount of info they provide on their spools. After opening over [----] different boxes of filament this is the very first time I'm seeing a label like this. I'm not sure why it brings me so much joy 😅😀 I have [--] rolls of PHA (polyhydroxyalkanoate) which is 100% biodegradable in a normal environment unlike PLA (polylactic acid) that is biodegradable only in industrial composting conditions. They also sent over [--] rolls of fluorescent PLA as they could tell I like my UV reactive colors 🥰 What do you think"
TikTok Link 2026-02-04T18:58Z 43.5K followers, [----] engagements

"Hello Here is a very brief introduction to who I am my workshop and some of the things that I do I have been working at this since the end of August when I had an Instagram reel go viral. Now I'm working with designers all over the world I'm in my workshop any minute I can be. I have two home based businesses that allow me be tinkering just way too much"
TikTok Link 2024-02-18T22:34Z 43.5K followers, 40.6K engagements

"Have you thought about 3D printing onto fabric It opens up entirely new worlds in fashion textiles visual arts etc. I've been hacking away at experiment after experiment designing and sharing as much as I can along the journey. For those that have followed along my journey you know I'm out here working away tirelessly nearly every day 🫠 I've paired up with @thangs3d to upload the files that I create creating a membership plan where those interested can support my processes and in return gain access to the files that I create. Becoming a member also gives you access to my discord server where"
TikTok Link 2024-07-29T21:18Z 43.5K followers, 49.2K engagements

"I've just added a shorter fingerless glove version to my @thangs3d account. There are three sizes included in this file. I used the AMS unit on my @bambulab_official to get a black and white print. I printed this on a two-way powermesh. The file includes a pdf with additional fabric links. This is printed on an inception pflat sheet found at www.kaizen3dprints.com Each side takes about [--] minutes to print with a pause added at layer [--] to add your fabric The direct link to this file can be found here https://than.gs/m/1130380"
TikTok Link 2024-08-29T18:01Z 43.5K followers, 145.1K engagements

"Here is a 3D printed snakeskin textile fresh of the printer. In this example I'm using white to purple UV reactive PLA from @inlandfilament on a polyester spandex polymesh. For the holographic effect I'm using a magnetic inception pflat sheet (www.kaizen3dprints.com) that can be used over and over again. This holographic effect is created by copying effect that refracts light. This snakeskin pattern us available on my @Thangs3D page as a base textile to use in combination with negative modifiers to create the perfect seam allowance. No additional z movement is needed mid print the layer"
TikTok Link 2025-12-19T05:49Z 43.5K followers, 4M engagements

"#ad I've wanted to set up a [--] color system on a @BAMBULAB Official 3D printer ever since I knew about them. I searched and searched but wasn't able to find any other setup that takes full advantage of the AMS units. After I got the H2C I knew I had to make it a reality. I had already purchased the [--] to [--] ptfe tube connectors and I had plenty of ptfe tubing itself. I just needed [--] more AMS HT units to make my [--] color dream a reality. Before you imagine the massive amount of poops please keep in mind that I specialize in 3D printed textiles that are generally only [--] layers thick. What are"
TikTok Link 2025-12-22T03:20Z 43.5K followers, 541.5K engagements

"How do I remove TPU from the PFLAT sheets that I use Isopropyl alcohol of course 😀 This time I'm printing on the Flicker Grid effect sheet using two different types of squishy filament on the @snapmaker_global U1 using a snake modifier and a wallet that I'm currently prototyping. Wishing everyone a safe weekend"
TikTok Link 2026-01-25T00:10Z 43.5K followers, 164.9K engagements

"I don't know if I could be happier with how these multi color tpu prints are turning out. I just uploaded a new textile/modifier to my @Thangs3D profile and this is just one way to incorporate them. In the last [--] hours of printing multi color tpu models I haven't had a jam or any issues. The @Snapmaker U1 has been doing a great job. I'm using white and black 95a TPU from @Inslogic 3D Red silk TPU from Yousu and Blue silk TPU from @SUNLU STORE and it was printed on a starlit hive PFLAT sheet What do you think"
TikTok Link 2026-02-05T00:09Z 43.5K followers, [----] engagements

"#ad These shoes were 3D printed and I am pretty dang impressed These were a collaboration between @BAMBULAB Official Formism and SCRY. These two designs in particular are the formism arc sneaker and the formism persona unisex shoe. The sneakers have quickly become my new house shoes and I'm looking for any schnazzy opportunity to wear the other dress shoes. If you want to print these up yourself head over to MakerWorld and search "formism" What do you think of these shoes"
TikTok Link 2026-02-08T19:55Z 43.5K followers, 36.3K engagements

"#ad I received a Series X: Tetras dryer addon for my AMS gen [--] from Eibos so I made a quick video on how to get it up and running. I think it's cool that you can have [--] dryer settings going at once. What do you think If you need to dry your filament while printing this may be a good option for you especially if you live in a humid environment"
TikTok Link 2026-02-09T00:36Z 43.5K followers, [----] engagements

"Here is a little preview of a wallet that's on the horizon. Printed in TPU on the Snapmaker U1 this fits in the pocket so nice (or as a lanyard with the grommet points). Endlessly customizable with different patterns and color combinations. What pattern do you want to see"
TikTok Link 2026-02-09T04:30Z 43.5K followers, [----] engagements

"#ad I just printed a basic benchy to get an idea for these [--] new colors I just got in from @EryoneOfficial I'm using the @BAMBULAB Official for limited waste as the vortek system does a great job at managing filament changes. This took about [--] hours to print with a .2mm layer height on a .4mm nozzle. If you want to check these filaments out head to https://eryone3d.com"
TikTok Link 2026-02-12T18:44Z 43.5K followers, [----] engagements

"Hey @FedEx It's me again. Yet another improperly handled delivery. Am I just the unluckiest customer A couple of month's ago it was drop kicking my 3D printer out of your truck. Now you've resorted to delivering packages to the wrong house all together What's next rooftop delivery Thank goodness my new @xtoolofficial F2 Ultra UV was found down the street. Please do better"
TikTok Link 2026-02-14T00:29Z 43.5K followers, [----] engagements

"BASE CANDY vs BASE GALAXY ☠😱 #roblox #fyp"
TikTok Link 2025-12-01T15:03Z [--] followers, 14.6K engagements

"I printed this a couple of days ago but life got in the way of posting it. This example is .24mm for the first two layers (to accommodate the mesh) followed by .16mm layer height. I am still confused as why the estimated print time is drastically different that actual print time. In this example it was estimated at 9h52m and the actual print time was 15h47m - 5h55m longer (over 50% above sliced time) I shared this in the @Snapmaker discord in hopes I would get an answer when I posted this video but I am still waiting on a response. Has anyone else had issues with the estimated print time"
TikTok Link 2025-12-03T04:52Z 24K followers, [----] engagements

"This is a test on the @BAMBULAB Official P2S. I am checking to see if there is a difference in sliced time vs actual print time. The slicer stated 11h25m and the actual print time was 11h24m. It was a 64.3g textile The prime tower weighed 7.36g The purges weighed [-----] In my opinion the quality is a 9.5/10 with some minor post processing details that will need to be done"
TikTok Link 2025-12-03T20:48Z 36.6K followers, 30.3K engagements

"Integrity and transparency. These are two things that I want to discuss today. I have never been paid by a company to either promote them or bash competition. Ever. I started my social media page to share the love and excitement of the 3D printing hobby with as many people as I could. How would I fathom that nearly [--] years later there are nearly a quarter of a million people that follow me across social media. I have recently been sent comments and messages assuming and accusing me of being a sellout or lacking integrity. This hurt me and prompted this post. I have always been and will always"
TikTok Link 2025-12-03T22:14Z 30.4K followers, [----] engagements

"The results are in On the left we have the @Snapmaker U1. On the right we have the @BAMBULAB Official P2S with an AMS. These tests were done in Snapmaker Orca and Bambu Lab Studio. Snapmaker is aware of the discrepancy in the slicer and is actively working on a fix. As you can see there are pros and cons to each side. The U1 had much less waste but also took longer (which took me by surprise) and the quality was slightly lower. The P2S was faster and presented with higher quality but also produced nearly the same amount of waste as the print itself. Let me know what you think about these"
TikTok Link 2025-12-04T04:58Z 24.8K followers, [----] engagements

"Thursday afternoon 3D printer workshop update. I'm sewing up a Santa hat I've got tpu95a on the Prusa XL Orca cube on the the U1 to get some more timing tests Same Orca cube on the P2S to compare quality .6mm nozzle on the H2D printing up some PEBA And eating half a sandwich 😀"
TikTok Link 2025-12-05T00:33Z 38.8K followers, [----] engagements

"Here is the second experiment I ran between the @Snapmaker U1 and the @BAMBULAB Official P2S. Yes I am aware that they are different styles of 3D printers. They are around the same price point so I thought this video might help those who haven't decided on their printer yet. This experiment demonstrates the amount of time and filament saved - both cubes were painted identically using stock slicer settings. Yes I am also aware that I could have purged into another object on the build plate but wanted to visual of the poops. Let me know your thoughts in the comments"
TikTok Link 2025-12-05T19:28Z 40.4K followers, 17.2K engagements

"I got my first Santa hat prototyped and I learned a lot a) no 3d printed material at the tip as the ball covers it and it will make it easier to hand sew. b) I needed to make the brim twice as high c) I can make the ball shiny at the end but will probably keep the brim plain for comfort and ease of assembly. Happy weekend"
TikTok Link 2025-12-05T23:00Z 39K followers, [----] engagements

"Here is the progress on my 3D printed holographic Santa Claus hat. I printed the pompom today and sewed them together. Now all that's left is sewing the fleece brim to the hat Then I'll upload the guide and model to my @Thangs3D account. Wishing everyone a happy Sunday"
TikTok Link 2025-12-08T01:09Z 38.4K followers, 17.5K engagements

"A couple of days ago I posted about the first side of a 3d printed santa claus hat. I just finished sewing it up and thought I'd share the general sewing technique I'll work on uploading this file tomorrow. I printed it on my @BAMBULAB Official H2S"
TikTok Link 2025-12-08T04:39Z 40.4K followers, 19.3K engagements

"I'm still testing out this PEBA filament from @Amolen 3D Printing Filaments It was recommended i use a .6 or .8mm nozzle with this but only have a .4mm nozzle on the @snapmaker_global U1. I was very impressed There were minor issues expected as I didnt use any supports on this ball but was pretty darn happy with the results. PEBA has much more bounce that TPU. I'm excited to continue testing with it Do you have anything you want to see printed in PEBA"
TikTok Link 2025-12-09T17:20Z 35.6K followers, [----] engagements

"I've gotten a couple of new requests for showing how I sew with these 3D printed textiles so here it is I'm using an ST371HD from @brothersews with a stretch needle and a straight stitch using a zipper presser foot. I aligned the needle up against the side of the 3D printed textile. Once the two sides are sewn they will be assembled together and added into the 3D printed clutch hardware"
TikTok Link 2025-12-10T05:12Z 33.2K followers, [----] engagements

"Welp I don't think I dried this PVA enough 😅 but I'm letting this airless tennis ball finish out that I'm printing with PEBA from @Amolen 3D Printing Filaments on the @snapmaker_global U1"
TikTok Link 2025-12-11T04:46Z 25.2K followers, [----] engagements

"The @Timeplast Inc. trials still continue. Now after [--] hours of drying at [--] degrees I feel like I am getting somewhere with the print quality. Right now I am just working with their "retroreflective holographic filament". The tactile feel and the smell are two things I was surprised by. It is very sticky to the touch and smells strongly of laminate glue. I've just put it in for another [--] hours of drying to make it an even [--] hours of drying before moving on to temperature tests. The printing process has been difficult as there are multiple sources for printing parameters. Their chat gpt"
TikTok Link 2025-12-13T21:14Z 36.2K followers, 13.5K engagements

"I was invited to come hang out for the massive holiday livestream [----] with @Joel Telling and I had to whip up some textiles for the event. I am super pumped at how great these new pixelated prints are turning out. If you'd like to join in on the festivities and help support the Seattle Children's Hospital set a reminder for 12pm on Tuesday Dec 16th and join us on his channel"
TikTok Link 2025-12-15T04:18Z 33.5K followers, [----] engagements

"The @BAMBULAB Official H2C box came in clutch for making this enclosure for our dog to keep her contained while she recovers from her TPLO surgery. Next I'll model up a little 3d gate latch to mount on the inside 😅"
TikTok Link 2025-12-16T00:12Z 34.9K followers, [----] engagements

"Here is the first [--] color print on the @BAMBULAB Official H2C. I'm using a new program that pixelates images and converts them into stl files for individual coloring in the slicer. This is a very rudimentary example of printing with the max amount of colors using [--] ams units (4 ams [--] pro and [--] ams ht). The total print time of this was [---] hours. The next example i have coming up is [---] hours. One perk of textiles is that I don't have to print super tall to get an amazing effect as shown in this example print 😀. There were zero errors on this print (except for user error when painting I"
TikTok Link 2025-12-22T19:33Z 40K followers, 99.5K engagements

"#ad Here are a few answers to some questions I received after posting my first video about this [--] color setup on the @BAMBULAB Official H2C. Any questions not covered Leave them in the comments No there isn't a lot of waste as my textile prints tend to be very thin. The two samples shown are [--] grams and [--] grams of poops. No filament changes don't take [--] years. these two prints were done in [---] hours (left) and [---] hours (right). Ptfe tubes are recommended to be the shortest length possible while avoiding sharp bends. In this setup I kept the ptfe lengths stock to allow for a more gradual"
TikTok Link 2025-12-23T19:21Z 38.7K followers, 36.6K engagements

"last day with my iphone [--] pm🥲 last day with my iphone [--] pm🥲 last day with my iphone [--] pm🥲"
TikTok Link 2025-12-24T10:30Z [---] followers, 101K engagements

"Did dad like it #singing #coversong #coversong #stargazing #mylessmith Asking my brother to sing in front of dad 😭 Asking my brother to sing in front of dad 😭"
TikTok Link 2025-12-24T17:27Z 757.4K followers, 212.8K engagements

"Hey y'all Does anyone have any health share recommendations At this point I can't afford basic health insurance. My insurance premiums went from $170 to $780 per month for the most basic plan with a $9800 deductible. I feel so fortunate to be healthy (for now) At this point I'll depend on my personal injury insurance. $9360 a year is absolutely absurd and I'm ashamed at what the health care industry has become. I would love any recommendations on what you have done if you're in a similar circumstance as I am"
TikTok Link 2025-12-27T22:12Z 36.8K followers, [----] engagements

"Here is a great question Will the UV reactive fabric change with the quantity of UV light outdoors The answer is yes We can tell in this example that indirect sunlight can cause the filament to react but when it is in direct sunlight it reacts the most. These filaments are intended for multiple color changes not prolonged exposure to the sun. With my testing if left exposed to UV light for greater than 36+ hours the effectiveness of the color change decreased. On the other hand when using my UV light I was able to get 500+ color transitions without a noticeable decrease in effect. I'm not"
TikTok Link 2025-12-28T22:24Z 38.7K followers, 37.1K engagements

"I ran out of cards with the influx of purchases over the last couple of days and had to print up some fresh ones. This time I'm using dual and quad color silk PLA from @Amolen 3D Printing Filaments on magnetic PFLAT sheets that imbue a special holographic effect (www.kaizen3dprints.com) A pause command is placed at layer [--] of [--] where a nylon based illusion mesh is held down with 60x10x3mm bar magnets. The print is resumed encapsulating the mesh and will move onto the last layer to finish. Any questions I love comments"
TikTok Link 2025-12-30T00:19Z 38K followers, [----] engagements

"I just opened up my youtube notifications to find some more @Timeplast Inc. comments they're a treat For those new to the Timeplast saga I've been sharing factual data and my printing experience with their filament. After the new year I'll continue testing the filaments that I was able to order. I also have some other experiments in the works I'm excited to share once the results come back. I would love to hear about your personal experience whether it's been good or bad what you printed etc. I want this company to succeed but their actions have been very off putting"
TikTok Link 2025-12-30T06:12Z 39.7K followers, 11.3K engagements

"Sadie and I are here to wish you a very safe and fun New Year She is very excited for today as she should get her stitches out and her cone off from her surgery. Wahoo I am so excited to get back to projects in the workshop 🥰 Stay safe and happy printing"
TikTok Link 2025-12-31T19:03Z 39.7K followers, [----] engagements

"@Pat McAfee Show Clips #cfp #miami #cottonbowl #cfb #collegefootball Pat kept it real with Ohio States marching band 😅 Pat kept it real with Ohio States marching band 😅"
TikTok Link 2026-01-01T02:24Z 56.1M followers, 63.1K engagements

"Happy New Year I try to record as many fabric peels as I can. I've been out of the workshop for a bit so this one has been sitting on the build plate for a couple of days. This video is another demonstration of using UV reactive PLA in 3D printed textiles. I plan on turning these two pieces into a simple bag as a demonstration of basic sewing potential. One of the questions I get asked most often is "but now what". The 3D printed textiles that can be created are able to be incorporated into anything that would call for a textile. Bags dresses skirts shirts hats curtains upholstery tactile"
TikTok Link 2026-01-02T01:38Z [--] followers, 17.5K engagements

"I had to recheck i didn't set to this to .08mm layer height. This was printed on a Bambu Lab P1S with a .4mm nozzle at .2mm layer height with orange PLA from Prusament. This came out so clean 😅"
TikTok Link 2026-01-03T23:59Z 38K followers, [----] engagements

"ASMR warning - Ahhh this may be one of my favorite ones so far. It's just so satisfying. [-----] squares Black pla from @iiidmaxfilament White two way polymesh Printed with @bambulab_official P1P @ 15mm/s. [---] hours [--] grams"
TikTok Link 2024-04-12T00:49Z 42.5K followers, [----] engagements

"A little behind the scenes on my tie prototype. I've got little snap fasteners embedded in a rectangle to make swapping this tie out for any occasion a breeze. More to be revealed Printed with a red blue green tri color pla from @lovoon3d on a bifrost PFLAT magnetic build sheet (check out my website for more info)"
TikTok Link 2024-06-02T05:42Z 43.2K followers, [----] engagements

"These foldable clutches are coming along nicely Preparing guides today to upload some more files to my @thangs3d account. These clutches print in [---] hours. This was the first print I've used magnets in believe it or not I used [--] @ 10mmx2mm round magnets for each side of the clutch. We added some small jump rings to the top some fabric to line the inside and some snap.fasteners to keep the sides closed (alternate version incoming). These are printed on a variety of magnetic PFLAT build sheets. These are very light weight at around [--] ounces with the chain. This whole 3d printing onto fabric is"
TikTok Link 2024-07-02T17:14Z [--] followers, 12.8K engagements

"Fabric sample pack Check it out Have you been interested in printing but don't know where to start with fabrics Fear not I've assembled sample pack that includes [--] 12"x12" pieces in a variety of materials. Polymesh powermesh illusion mesh petticoat tulle along with organza chiffon or a variety of other meshes that I've tried and tested. If you want more you know where I'll be I just cut up a whole bunch of pieces so I'm ready to get them mailed out to you today Check them out at www.kaizen3dprints.com"
TikTok Link 2024-08-14T05:41Z 43.3K followers, [----] engagements

"There are just so many different types of filament out there to experiment with. One of my favorites is this white to purple with uv exposure from @plasport3dfilament Printed on a white powermesh fabric with an inception pflat sheet I'm super pumped to print the second side of this fingerless glove and get it sewn together. You can check out https://than.gs/m/1126042 for the stl file for the gloves. Some basic sewing skills are required"
TikTok Link 2024-08-28T16:01Z 41.8K followers, 740.3K engagements

"Behold - the power of the PFLAT sheet (Pattern flat) this one in particular is called Bifrost. The build plate has the pattern printed onto it which is created by refracting light. When they are printed on those grooves are all filled up and once removed retain the same pattern. This effect can be refreshed with isopropyl alcohol as it will diminish over time with the oils from our hands touching it. I print my first layer at 35mm/s and absolutely love the adhesion of these. The model is a foldable box prototype that I'm working on :) I'm currently running a little low on inventory check out"
TikTok Link 2024-09-07T16:57Z 42.5K followers, 50.3K engagements

"I have been working on some personal projects around the house today but I still managed to get a small amount of time in the workshop to finish assembling the hdmi7 v1.2 screen from @bigtreetech_official on my Sovol SV08 I printed the base with blue pla silk + from @bambulab_official and the face plate and back adapter with blue translucent petg from @bambulab. I printed them on a bambulab p1p and p1s with a .4mm nozzle. I found the files on makerworld from Axel Dreher - https://makerworld.com/en/models/660731-bigtreetech-btt-hdmi7-v1-2-display-enclosurefrom=search#profileId-587903 Now the"
TikTok Link 2025-03-14T17:40Z 42.8K followers, [----] engagements

"Newly added model up on my @thangs3d profile. There are [--] variants to 3D print. Use them as you would any textile by sewing them into accessories garments etc. Use negative modifiers to create just the size and shape that you want. Www.thangs.com/designer/kaizen3dprints These were printed on illusion mesh from @dfwfabricmart They are printed at 35mm/s first layer 50mm/s other layers at .24mm layer height with [--] layers and a pause command added at the beginning of layer two for adding fabric and magnets. I used - Purple to blue thermochromic htpla from @protopasta Cupid's crush htpla from"
TikTok Link 2025-03-17T01:32Z 42.1K followers, 40.2K engagements

"You asked for a dice bag - here's the most magical dice bag I've ever seen new on my @Thangs3D profile. For this model and two larger sizes head to www.thangs.com/designer/kaizen3dprints This takes around [---] hours to print on a @bambulab_official A1 mini with a pause at the second layer to add fabric and magnets. It can be reversed to turn into a dice tray. Flip it back around when you've finished with your quest. A variety of closures can be used. This example uses a 2mm iridescent chain and a simple cord end stop. This is printed with a blue silk pla + from @bambulab_official on a black"
TikTok Link 2025-04-02T19:24Z 42.2K followers, 10.6K engagements

"I received both a glacier and frostbite build plate from @bigtreetech_biqu. I just used the glacier plate on the @BAMBULAB Official H2D for the first time. I didn't have much doubts about things sticking to it more things coming off it it 😅. Fortunately there was no problem there it's ready for the next job Disclaimer this was the second take as I dropped my phone on the first one. For this model I increased the z interface distance from .2mm to .28mm and the supports came off very easily 🥰 Using a glacier build plate from @bigtreetech_biqu on the H2D from @BAMBULABOfficial Using a glacier"
TikTok Link 2025-07-19T01:40Z 42.4K followers, [----] engagements

"I have gotten the question "how do I keep my filaments dry" quite often over the last week. Here is the answer to that I have a [--] pint whole room dehumidifier that does an amazing job at keeping the humidity levels down in here. If I run across excessive stringing I'll toss them in a filament dryer before printing. With over [---] spools of different filament I was no longer able to keep them properly organized in totes and my sanity in tact. I do have exclusive dry boxes for my more sensitive filaments (pacf cf pahtcf etc) Happy printing"
TikTok Link 2025-11-03T17:57Z [--] followers, 30.4K engagements

"Now that I've gotten the toolhead picking and parking taken care of on the @Snapmaker U1 I can work on dialing in this first layer. I enjoy being able to open up the Klipper UI to get a better image of the bed leveling mesh that it's created. Tomorrow I will run the manual leveling wizard that's built in. Currently I have a variance of .3mm but would like to get it to half that as what I do relies heavily on a perfect first layer"
TikTok Link 2025-11-26T07:08Z 42.5K followers, 26.1K engagements

"I've just uploaded the 3D printed Santa Claus hat textile file on my @Thangs3D account. Check out the link in my profile if you'd like to learn more You will need basic sewing knowledge to complete this hat. There are three sizes to choose from. Happy printing"
TikTok Link 2025-12-11T02:16Z 42.5K followers, [----] engagements

"I just recieved two additional .4mm nozzles for the @BAMBULAB Official H2C so I can print with a total of [--] colors with very little waste compared to a traditional single nozzle printer. So far I've really been enjoying the ease of use and high quality prints that this machine is putting out. It's also been fabulous to jump back and forth between different nozzle sizes without having to actually change them. Now that I've got [--] .4mm nozzles to print with I'll be loading up some fun multicolor textile prints"
TikTok Link 2025-12-11T05:02Z 42K followers, 40.9K engagements

"Yessssss it feels so good to be on the path to organization. Thank you Gridfinity for making it so easy This was all printed on @BAMBULAB Official printers using a variety of their translucent PLA. What do you think"
TikTok Link 2025-12-11T23:54Z 41.8K followers, 10.8K engagements

"Here is a freshly 3D printed multicolor uv reactive holographic floral textile for your viewing pleasure 🥰"
TikTok Link 2025-12-27T01:26Z 41.4K followers, 34.3K engagements

"I'm getting back into the workshop groove after the holidays and the first print to come off the build plate is this [--] color pixelated textile. I printed it using basic PLA colors from @Bambu Lab on the H2C using white illusion mesh. It took about [--] hours of print time with [--] purges. Next I'll print the same model but only the first layer with color the others will be white for less waste. I used my new favorite software to create this textile design - www.pixelart3dcreator.com What do you think"
TikTok Link 2026-01-02T20:21Z 42K followers, 47.8K engagements

"Happy Saturday evening I am putting this new closure style on the front burner as I think about the edits I need to make on this model nearly every day. I'll cut some lining to size and sew this up tonight while making a video on how to put them together before I can upload this to my Thangs profile. I'm looking forward to getting some of these things checked off my list I have so many more I want to start. This is printed with an inception style pflat sheet using Starlit Flow PLA from @SUNLU STORE"
TikTok Link 2026-01-18T01:08Z 42K followers, 10.7K engagements

"I had my first extruder jam on the @snapmaker_global while using some 95a TPU on an overnight print. Here is a video I made to document the process of disassembling the toolhead to remove a filament jam. From start to finish it took about [--] minutes. I imagine the next time may take [--] minutes if i wasn't taking videos along the way. Any questions Leave a comment if you'd like"
TikTok Link 2026-01-20T02:31Z 42K followers, [----] engagements

"Do you want to try your hand at 3D printing the ultimate card box This box is a print on fabric model for bed sizes 256x256 or larger. It takes approximately [---] hours to print. Find this model and others at www.thangs.com/designer/kaizen3dprints One of my favorite shows growing up was @officialyugiohtcg and now I want to go get some trading cards just to put in this. For those versions I used an orange blue green tri color from @esun3dprinting and a gold green fuschia pla silk from @aceaddity. I prefer printing this on an illusion mesh from @dfwfabricmart or a two-way polymesh These are"
TikTok Link 2024-09-09T23:41Z 43.5K followers, [----] engagements

"This is my first 3d printed textile where I'm using [--] different colors on the same print. In this example I'm using the entire @bambulab_official silk PLA + line and the Bambulab sparkle PLA This is printed on a graffiti magnetic pflat sheet available at www.kaizen3dprints.com for the holographic effects. This is printed on a black illusion mesh from @dfwfabricmart"
TikTok Link 2025-05-15T21:36Z 43.5K followers, 187.7K engagements

"I've been in the @bambulab_official ecosystem for a little over two years and I've loved every day of it. Recently I added an H2D to the family with an AMS HT unit. The H2D can link up to [--] HT units together translating for up to [--] colors when using an external spool as well. I'm hoping to add more HT units to the H2D and X1C as the integrated drying and printing has been a pretty awesome upgrade. I wanted to print with a little stiffer of TPU and the TPU for AMS is just what I'm looking for. Any questions about the setup I'm happy to help"
TikTok Link 2025-06-03T00:42Z 43.5K followers, 13.3K engagements

"We'll just go through each of these PFLAT effects one by one. This is "inception" I continue to be amazed by the bed adhesion of these build plates. The holographic effect transfers to the bottom layer of the print. This is just printed in a black and white PLA. Check out my website www.kaizen3dprints.com and get yours today"
TikTok Link 2024-05-31T19:25Z 43.5K followers, [----] engagements

"First and foremost there is an additional purchase required after this model download on @thangs3d - the kiss clutch kit with chain mesh and closure can be found at www.kaizen3dprints.com You must be a member to download this file. Www.thangs.com/designer/kaizen3dprints It is difficult to source a steady supply of identical hardware - this will be a limited run. When I run out of kits then the model will be pulled from my thangs account. If the manufacturer is able to produce another run I can relist them. If you have any questions please email me at kaizen3dprints@gmail.com This video acts"
TikTok Link 2024-10-30T02:16Z 43.5K followers, 80.9K engagements

Limited data mode. Full metrics available with subscription: lunarcrush.com/pricing