[GUEST ACCESS MODE: Data is scrambled or limited to provide examples. Make requests using your API key to unlock full data. Check https://lunarcrush.ai/auth for authentication information.]
@awesomeframers awesomeframers
awesomeframers posts on TikTok about all the, tricks, lvl, the white the most. They currently have XXXXXXX followers and X posts still getting attention that total XXXXX engagements in the last XX hours.
Engagements: XXXXX #
- X Week XXXXX +369%
- X Month XXXXXX -XX%
- X Months XXXXXXXXX -XX%
- X Year XXXXXXXXX -XX%
Mentions: X #
- X Week X -XX%
- X Month XX -XX%
- X Months XXX +58%
- X Year XXX +81%
Followers: XXXXXXX #
- X Week XXXXXXX no change
- X Month XXXXXXX +0.05%
- X Months XXXXXXX +0.55%
- X Year XXXXXXX +2.10%
CreatorRank: XXXXXXXXX #
Social Influence
Social topic influence all the 14.29%, tricks 14.29%, lvl 14.29%, the white 14.29%, for long 14.29%, sfa XXXXX%
Top accounts mentioned or mentioned by @huber @makita @simpson @diablo @isotunes @nicks @truewerk @keenutility @metabohpt @pacific @pwtewp @huberwood
Top Social Posts
Top posts by engagements in the last XX hours
"SET-3G epoxy anchoring adhesive can be used in cracked and uncracked concrete. It is recognized per ICC ES AC308 for post-installed rebar development and splice length requirements. Why is this important Retro-fit applications to name one. This video shows how to use the adhesive correctly. It is imperative that we 1) drill the proper size hole 2) clean the hole 3) mix the adhesive properly. SET-3G is also approved for mutilple vacuum-drill bit systems without further hole cleaning. As you can see here the @Makita Tools USA did a fantastic job of keeping the dust down during drilling but this"
TikTok Link 2024-06-10T21:50Z 273.8K followers, 53.8K engagements
"#ad Tips & Tricks for deck framing. I like using blocking to keep joists on layout. I still mark layout on the girder but don't nail all the joists on layout I use the blocks to do thissaving time. We are going to use the required hardware to connect the #PWTTreated LVL joist to the girder. This also avoids puncturing the tape. The white in my Pica makes it easy to see. Look closely at how all the #PWTTreated LVL joists are exactly the same dimensions. This directly translates into decking laying nice and flat. Since we are outside I'm using hot-dipped galvanized nails to fasten the Treated"
TikTok Link 2024-04-15T22:56Z 273.8K followers, 431.2K engagements
"Next step.treads. Advantech X Factor bonded with Advantech Subfloor Adhesive to PWT LVL stringers. Paslode Tetragrip nail for long term squeak free stairs #framing #framer #huberpartner #longliveourbuildings @Pacific Woodtech @Huber Engineered Woods"
TikTok Link 2025-10-29T13:18Z 273.8K followers, 19K engagements
"#ad The equation for Bomber stairs is as follows.LVL stringers + Advantech SFA + 2x8 risers + 3" ring shank nails . 1x4 nailed to the side of the stringers to space off the wall. I verified that there will be no skirt board if there was I would use 2x . #ad #PWT #PWTpros #construction #builder @pwt_ewp"
TikTok Link 2025-10-14T14:01Z 273.8K followers, 480K engagements
"See the Reel before this for part X #framing #framer #huberpartner"
TikTok Link 2025-12-10T01:18Z 273.8K followers, 2709 engagements